Lenovo R25i-30 Monitor Setup and Safety Guide
This guide provides instructions for setting up and safely using your Lenovo R25i-30 monitor.
Getting Started and Setup
Follow these steps to assemble and connect your Lenovo R25i-30 monitor.
Step 1: Assemble the Stand
Attach the monitor base to the stand arm, and then connect the arm to the monitor bracket using the provided screws and clips as shown in the diagram.
Step 2: Connect Cables
Connect the power cable to the monitor and a grounded power outlet. Connect the video cable (HDMI or DisplayPort) from your computer to the monitor.
Step 3: Adjust Monitor Position
The monitor stand allows for adjustments. You can tilt the screen from -30° to +30°. The stand also supports a height adjustment range of 135mm.
Step 4: Rotate Screen (Optional)
The monitor can be rotated 90° for portrait mode. Ensure the stand is properly adjusted before rotating.
Step 5: Connect USB Devices
Connect your USB peripherals to the available USB ports on the monitor.
Step 6: Connect to Computer
Ensure the video cable is securely connected between the monitor and your computer.
Step 7: HDMI Connection
Use the HDMI cable to connect the monitor's HDMI port to your computer's HDMI output.
Step 8: DisplayPort (DP) Connection
Use the DisplayPort cable to connect the monitor's DP port to your computer's DP output.
Step 9: Connect Audio
Plug in your headphones or external speakers into the monitor's audio output jack.
Step 10: USB-C Connection (if applicable)
Connect a USB-C cable for data transfer and potentially power delivery.
Step 11: Connect Power
Plug the power cord into the monitor and then into a suitable wall outlet.
Step 12: Power On and Configure
Press the power button to turn on the monitor. Use the control button to navigate the on-screen display (OSD) menu for settings.
Step 13: Download Drivers and Software
For the latest drivers, documentation, and warranty information, visit https://pcsupport.lenovo.com/solutions/r25i_30 or scan the provided QR code.
Safety Information
DANGER: Shock Hazard
- Do not remove the monitor covers.
- Ensure the stand is attached before operating the product.
- Do not connect or disconnect the product during an electrical storm.
- The power cord plug must be connected to a properly wired and grounded power outlet.
- Any equipment attached to this product must also be connected to properly wired and grounded power outlets.
- To disconnect the monitor from the electrical supply, remove the plug from the power outlet. The power outlet should be easily accessible.
Handling Precautions
- If your monitor weighs more than 18 kg (39.68 lb), it is recommended that it be moved or lifted by two people.
General Safety Warnings
- ⚠️ Electrical hazard: Ensure proper grounding.
- ⚠️ Fall hazard: Ensure stable placement.
- ⚠️ Installation angles: Observe recommended angles (0-5 degrees) for optimal performance and safety.
Important Information
Circuit Breaker Recommendation
Please confirm that the building's distribution system provides a circuit breaker rated for 120/240V, 20A (maximum).
Battery Recycling and WEEE
Do not dispose of your product or battery with household waste. Refer to the Compliance Guide or visit https://www.lenovo.com/recycling for recycling information.
Trademarks
The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade dress, and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Product Support
The drivers, software, documentation, and warranty information for this monitor can be downloaded from https://pcsupport.lenovo.com/solutions/r25i_30.
This monitor supports the Lenovo Display Control Center - Artery.
Lenovo R25i-30 - Overview - Lenovo Support US
Regulatory Compliance | Recycling | Lenovo US
