Lenovo R45w-30 Monitor

Getting Started

The drivers, software, documentation, and warranty information for this monitor can be downloaded from https://pcsupport.lenovo.com/solutions/r45w_30 or by scanning the QR code.

The Lenovo R45w-30 supports the Lenovo Display Control Center - Artery.

Safety Information

DANGER: To Avoid Shock Hazard

• Do not remove the covers.
• Do not operate this product unless the stand is attached.
• Do not connect or disconnect this product during an electrical storm.
• The power cord plug must be connected to a properly wired and grounded power outlet.
• Any equipment to which this product will be attached must also be connected to properly wired and grounded power outlets.
• To isolate the monitor from the electrical supply, you must remove the plug from the power outlet. The power outlet should be easily accessible.

Handling

• If your monitor weighs more than 18 kg (39.68 lb), it is recommended that it be moved or lifted by two people.

Electrical Safety Requirement

Please confirm that the distribution system in the building installation provides a circuit breaker rated 120/240V, 20A (maximum).

Setup Instructions

1. Step 1: Unpacking and Initial Checks

   Shows icons indicating safety precautions (e.g., ⚠️ for warnings, ✔️ for correct setup) and basic setup components.

2. Step 2: Attaching the Stand to the Monitor Base

   Illustrates connecting the monitor to a computer and power source, with visual cues for cable connections.

3. Step 3: Adjusting Monitor Stand

   Demonstrates the monitor stand's adjustability, showing tilt angles (-5° to 22°) and height adjustment (up to 135mm).

4. Step 4: Connecting Cables to Monitor Ports

   Depicts the various ports on the back of the monitor for connecting peripherals.

5. Step 5: Rear View of Monitor

   A rear view of the monitor, highlighting the stand attachment point.

6. Step 6: Identifying Monitor Ports

   Close-up view of the monitor's rear panel, showing different input/output ports.

7. Step 7: Connecting via HDMI

   Shows how to connect the monitor to a source device using an HDMI cable.

8. Step 8: Connecting via DisplayPort

   Shows how to connect the monitor to a source device using a DisplayPort cable.

9. Step 9: Connecting via USB-C

   Shows how to connect the monitor to a source device using a USB-C cable, indicating data and potential power delivery.

10. Step 10: Connecting via USB-A Ports

    Illustrates connecting devices to the monitor's USB-A ports.

11. Step 11: Connecting a USB Hub

    Shows connecting a USB hub to the monitor.

12. Step 12: USB-C Data and Power Connection

    Further detail on connecting via USB-C, emphasizing data and power capabilities.

13. Step 13: Connecting Audio Devices

    Depicts connecting audio output devices, such as headphones (?), to the monitor.

14. Step 14: Connecting the Power Cable

    Shows the connection of the power cable to the monitor and the wall outlet (⚡).

15. Step 15: Stand Assembly and Adjustment

    Details the process of assembling the monitor stand and attaching it to the monitor base.

16. Step 16: Placing Monitor on Stand

    Shows the final step of placing the monitor onto its assembled stand.

17. Step 17: Important Notices

    Displays important safety warnings, including electrical safety and eye care recommendations.

    • Eye Care: 1. Take a 10-minute break for every 30 minutes of use. 2. Children under 2 years old should not look at the screen; children over 2 years old should not exceed 1 hour of screen time per day.

Important Notes and Disclaimers

USB Transfer Rate: Depending on many factors such as the processing capability of peripheral devices, file attributes, and other factors related to system configuration and operating environments, the actual transfer rate using the various USB connectors on this device will vary and is typically slower than the data rates as defined by the respective USB specifications: 5 Gbit/s for USB 3.2 Gen 1; 10 Gbit/s for USB 3.2 Gen 2 & 20 Gbit/s for USB 3.2 Gen2x2.

Ethernet Optimization: Please download the SW "Dragon" to get a state of Ethernet optimization function.

HDMI Trademark: The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI trade dress and the HDMI Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

EPREL Registration: EPREL registration number: 1531654

Battery Recycling: Important Battery Recycling and WEEE information. Do not dispose of your product or battery with your household waste. Refer to the Compliance Guide that came with your product for further information or go to https://www.lenovo.com/recycling.