Aosom Motorized Screen User Manual

Introduction

Thank you for choosing Aosom screens. All screens undergo strict quality inspections before delivery. Please read this manual carefully to ensure proper usage.

Attention: Screen installation, electrical connections, and limit switch settings must be performed by qualified technicians only.

Product Overview

This document details the operation and safety of the Aosom Motorized Screen.

The system includes a motorized screen, a remote control transmitter, and a control box. The connection diagram shows the wiring between the 230V AC plug, the screen remote control, and the motor via the control box, with color-coded wires (BLACK, BLUE, BROWN, YELLOW) for UP, DOWN, L, N, and C+ connections.

If the remote control is not functioning, check and replace the battery.

Adjusting Limit Switches

Adjust the position of the two limit switches as follows:

Two adjustment points are shown. One for the DOWN movement limit (yellow wire) and one for the UP movement limit (white wire). To adjust, turn the screw clockwise to increase the stroke (travel distance) and counter-clockwise to reduce the stroke.

Useful Instructions

• The screen requires a suitable power supply (220V/50HZ, 230V/50HZ, or 110V/60HZ, 120V/60HZ). The motor's power must match the local voltage and frequency.
• The screen can be used with or without the remote controller.
• Typically, a synchronized motor is installed, but a tubular motor is available for special requirements.

Technical Specifications

• Motor:
• Power: 25W
• Speed: 15R/MIN
• Standby mode power: <0.5W

Important Safety Instructions

• This appliance can be used by children aged 8 and above, and persons with reduced physical, sensory, or mental capabilities, or lack of experience/knowledge, provided they receive supervision or instruction on safe use and understand the hazards.
• Children must not play with the appliance.
• User cleaning and maintenance must not be performed by unsupervised children.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid hazards.
• Do not exceed the rated number of operating cycles.
• Keep fixed controls away from children; keep remote controls out of reach of children.
• Frequently check the installation for imbalance, wear, or damage to cables, springs, and fixings. Do not use if repair or adjustment is needed.
• When operating a non-latching switch, ensure others are kept away.
• Do not operate during nearby maintenance activities (e.g., window cleaning).
• Disconnect the drive from the power supply or switch off automatic controls during nearby maintenance.
• Follow all instructions, as incorrect installation can lead to severe injury.
• Before installation, remove unnecessary cords/components and disable unneeded equipment.
• The actuator for a spring-return switch must be in direct sight of the driven part but away from moving parts, installed at a minimum height of 1.5m and not publicly accessible.
• Disconnect the drive from the power source during cleaning, maintenance, and part replacement.
• The supply cord must only be replaced with the same type supplied by the manufacturer.
• Sound pressure level (LpA) ≤ 70 dB(A).
• Children must not be near the appliance during installation.

Contact Information

For questions, contact the customer care center:

US/Canada:

• Phone: 001-877-644-9366
• Email: customerservice@aosom.com
• Importer: Aosom LLC, 27150 SW Kinsman Rd, Wilsonville, OR 97070 USA. Made in China.