HOMCOM Indoor Lamp
Models: B31-546V70, B31-546V90
Specifications
| Model | Max Power | Adapter Input | Adapter Output |
|---|---|---|---|
| B31-546V70 | 20W | AC220-240V~50Hz | 24V/1.0A, 24W(max) |
| B31-546V90 | 20W | AC220-240V~50Hz | 24V/1.0A, 24W(max) |
Important Safety Information and Cautions
General Warnings:
- The light source of this luminaire is not replaceable. When the light source reaches its end of life, the entire luminaire must be replaced.
- Do not connect the light chain to the power supply while it is still in the packaging.
- Indoor Use Only: This product is designed for indoor use exclusively.
- Keep out of reach of children and animals. ??? ?
- Do not use in bathrooms or damp locations.
- Place the lamp on a flat surface, ensuring it is away from any flammable materials.
- Before cleaning, ensure the lamp is switched off.
- Do not pull the plug from the socket with wet hands.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
- Do not touch the bulb while the fixture is turned on.
- Never look directly at a lit bulb.
- Notice: Do not repeatedly turn the light on and off.
Care Instructions
- Unplug the lamp before cleaning.
- Wipe clean with a soft, dry cloth or a static duster.
- Always avoid the use of harsh chemicals or abrasive cleaners, as they may cause damage to the fixture's finish.
- Do not discard any contents until assembly is complete to avoid accidentally discarding small parts or hardware.
- This product contains a light source of energy efficiency class <F>.
Assembly Instructions
Parts List
- Part A: Base Plate (x4)
- Part B: Screw (x8)
- Part C: Small Square Plate (x1)
- Part D: Long Screw (x12)
- Part E: Nut (x9)
- Part F: Support Rod (x1)
- Part G: Short Screw (x3)
- Part H: Long Rod (x2)
- Part I: Small Screw (x1)
- Part J: Connector (x1)
Step 1 (01):
Attach Part F (Support Rod) to Part C (Small Square Plate) using Part G (Short Screws). Then, place Part C onto Part A (Base Plate). Secure Part A to the bottom of the assembled structure using Part B (Screws) and Part D (Long Screws) and Part E (Nuts). The diagram shows Part F inserted through Part C, and then Part C is placed on Part A. Screws A and D are shown going through A and into the structure, with nuts E on the other side. Part B screws are also shown.
Step 2 (02):
Attach Part H (Long Rods) to the top of the structure (Part C). Insert Part D (Long Screws) through Part H and into the structure, securing with Part E (Nuts).
Step 3 (03):
Continue attaching Part H (Long Rods) to the structure, securing with Part D (Long Screws) and Part E (Nuts). The diagram shows the lamp taking its final vertical form with multiple shelves.
Step 4 (04):
Attach Part J (Connector) to the top of the assembled structure. Use Part I (Small Screw) to secure it. Part B (Screws) are also shown being used in conjunction with Part D (Long Screws) and Part E (Nuts) to connect the top section.
Step 5 (05):
The final assembly is shown, a complete vertical lamp structure.
Disposal Information
The WEEE symbol [WEEE symbol] indicates that this appliance, its accessories, cords, and batteries should be recycled. Please do not dispose of them with regular household waste. For recycling options, please visit www.quefairedemesdechets.fr or consult local collection points. Prioritize repair or donation of your device.
Contact Information
For any questions or assistance, please contact the Aosom customer care center:
United Kingdom
Phone: 0044-800-240-4004
Email: enquiries@mhstar.co.uk
Importer Address: MH STAR UK LTD, Unit 27, Perivale Park, Horsenden lane South, Perivale, UB6 7RH, MADE IN CHINA
Spain
Phone: 0034-931294512
Email: atencioncliente@aosom.es
Importer/Manufacturer/REP: Spanish Aosom, S.L., C/ Roc Gros, N° 15. 08550, Els Hostalets de Balenyà, Spain. VAT ID: B66295775. HECHO EN CHINA
France
Phone: 0033-1-84166106
Email: aosom@mhfrance.fr
Imported by/Manufacturer/REP: MH France, 2, rue Maurice Hartmann, 92130 Issy-les-Moulineaux, France. Fabriqué en Chine
Portugal
Phone: 0034-931294512
Email: info@aosom.pt
Importer: SPANISH AOSOM, S.L, C.ROC GROS N.15, 08550. ELS HOSTALETS DE BALENYÀ. Phone: 931294512 (Mon-Fri 7:30 AM to 4:30 PM). Email: INFO@AOSOM.PT. Website: WWW.AOSOM.PT
Germany
Phone: 0049-0(40)-87408465
Email: service@aosom.de
Importer/Manufacturer/REP: MH Handel GmbH, Wendenstraße 309, D-20537 Hamburg, Germany. MADE IN CHINA
Italy
Phone: 0039-0249471447
Email: clienti@aosom.it
IMPORTED BY/Manufacturer/REP: AOSOM Italy srl, Centro Direzionale Milanofiori, Strada 1 Palazzo F1, 20057 Assago (MI). VAT ID: 08567220960. FATTO IN CINA
