HyperGear VIBE Wireless Headphones
User Manual
Specifications
The HyperGear Vibe Wireless Headphones feature the following controls and ports:
- 1. Volume Up/Next Track: Press and hold for next track, press 1x for volume up.
- 2. Play/Pause: Press 1x to play/pause music, answer/end calls.
- 3. Volume Down/Previous Track: Press and hold for previous track, press 1x for volume down.
- 4. LED Indicator: Shows charging and pairing status.
- 5. USB-C Charging Port: For charging the headphones.
- 6. Auxiliary Input: For connecting with a 3.5mm audio cable.
- 7. Microphone: For calls.
Instructions
How to Charge
Connect to a USB power source using the included USB-C charging cable. Charging takes approximately 1.5 hours.
Status Indicators:
- ● Charging
- ● Fully Charged
How to Pair
When powered on, the LED will flash BLUE and RED to indicate pairing mode.
- On your device's Bluetooth menu (phone, tablet, etc.), enable searching for nearby Bluetooth devices.
- Select "HyperGear VIBE" to connect and pair.
- If prompted for a PIN code, enter "0000".
- Once paired, the LED will flash BLUE, and you will hear a tone confirming the connection.
Note: The headphones will automatically reconnect to the last paired Bluetooth audio device when turned on.
Play via AUX
Use a 3.5mm auxiliary cable to connect the headphones to other audio sources, including non-Bluetooth devices. Your music will play automatically.
Note: When wired via AUX, the headphones power off to save battery, and Bluetooth functions are disabled. Use the controls on your source device instead.
Functions
The following functions can be controlled via the headphones:
| Action | Button Press |
|---|---|
| Volume Up | Press 1x |
| Next Track | Press & Hold |
| Volume Down | Press 1x |
| Previous Track | Press & Hold |
| Power On | Press & Hold (2 sec) |
| Power Off | Press & Hold (4 sec) |
| Play/Pause | Press 1x |
| Answer/End Call | Press 1x |
| Reject Call | Press & Hold (2 sec) |
| Redial Call | Press 2x |
| Activate Voice Assistant | Press 3x |
*Remote functions may vary depending on phone models.
Important Safety Instructions
Read all safety instructions and warnings prior to using this product. Improper use and failure to follow safety guidelines could result in damage, excess heat, toxic fumes, fire, explosion, electrical shock, or other hazards causing serious and/or fatal injury and/or property damage. The user is responsible for maintaining this product with care for maximum use.
- Do not store the device in a depleted state. Battery cells may be damaged. Charge your unit at least once every 3 months, even when not in use.
- Permanent hearing loss may occur if you listen at high volumes. Set the volume to a safe level.
- Do not store at extreme temperatures (below 40°F or above 90°F).
- Recharge your device with the included USB-C charging cable or a certified 3rd party cable and a 2A charging adapter. Standard cables and adapters may charge the battery too slowly and damage/overheat the battery or cause a fire hazard.
- Do not attempt to modify, disassemble, or repair this product.
- Avoid excessive drops, bumps, and abrasions. If the device has dents, punctures, tears, deformities, or corrosion, discontinue use and contact the manufacturer or dispose of it in an appropriate method.
- If you find this product rapidly increasing in temperature, emitting odor, deformed, abraded, or demonstrating an abnormal phenomenon, discontinue use immediately.
- Disposal of the unit in the garbage is unlawful under state and federal environmental laws and regulations.
LIMITED ONE YEAR WARRANTY
Contact info@myhypergear.com to submit a warranty claim. Proof of purchase is required.
