HyperGear Wireless Audio Devices User Manual

HyperGear Wireless Earbuds

Music Controls

• Short Press: Volume Up / Volume Down
• Long Press (2 Sec): Next Track / Previous Track
• Short Press: Pause/Play
• Double Click: Redial Last Number

Hands-Free Calling Functions

• Short Press: Answer/End Call
• Press & Hold: Reject Call

Instruction

How to Charge: Use the included Micro USB charging cable to connect your earphones to a USB power source. The LED indicator will be RED while charging and turn OFF when complete (approx. 2 hours).

How to Power On/Power Off: Press and hold the MFB (Multi-Function Button) until you hear "Power On" or "Power Off".

How to Pair: Ensure earphones are powered off. Press and hold the MFB to power ON; the indicator light will flash RED & BLUE. On your device, enable Bluetooth and select "HyperGear BT Earbuds". Enter "0000" if prompted for a PIN. The LED will turn solid BLUE upon successful pairing. The earphones will automatically reconnect to the last paired device.

Troubleshooting

Earphones will not turn on: Ensure they are charged. Connect to a power source.

Earphones will not pair: Check if they are ON, in Pairing Mode, and within range. Ensure Bluetooth is enabled on your device. Charge both devices.

No music after pairing: Check range, volume levels on both devices, and ensure correct audio source is selected. Try re-pairing.

Sound too low/high/poor quality: Check range, volume settings, and potential interference from other devices. Try turning off Wi-Fi on your source device.

HyperGear On-Ear Wireless Headphones

Get to Know Your Device

• 1: Micro SD Card Slot
• 2: Microphone
• 3: LED Indicator
• 4: AUX-in Port
• 5: Micro USB Charging Port
• 6: Power ON/OFF, Play/Pause
• 7: Next Track, Volume Up
• 8: Previous Track, Volume Down
• 9: MODE
• 10: Answer/End Call, Redial

Instruction

How to Charge: Use the included Micro USB charging cable to connect your headphones to a USB power source. The LED indicator will be RED while charging and turn OFF when complete (approx. 3 hours).

How to Power On/Power Off: Press and hold the Power Button until you hear "Power On" or "Power Off". A low battery will cause the LED to flash RED quickly.

How to Pair: Ensure headphones are powered off. Press and hold the Power Button to turn ON; the indicator light will flash BLUE & GREEN. On your device, enable Bluetooth and select "HyperGear BT Headphones". Enter "0000" if prompted for a PIN. The LED will turn solid BLUE upon successful pairing. The headphones will automatically reconnect to the last paired device.

How to Play via Micro SD Card: Turn headphones ON and insert a Micro SD card into the slot. The LED will turn GREEN. Press the Mode Button to switch between Bluetooth and Micro SD Card modes.

How to Connect via Aux-in: Use the included 3.5mm auxiliary cable to connect to audio sources. The headphones will power OFF, and audio will play. Bluetooth controls and microphone are disabled when wired; use source device controls.

Troubleshooting

Headphones will not turn on: Ensure they are charged. Connect to a power source.

Headphones will not pair: Check if they are ON, in Pairing Mode, and within range. Ensure Bluetooth is enabled on your device. Charge both devices.

No music after pairing: Check range, volume levels on both devices, and ensure correct audio source is selected. Try re-pairing.

Sound too low/high/poor quality: Check range, volume settings, and potential interference from other devices. Try turning off Wi-Fi on your source device. Closing non-essential applications may improve audio quality.

Bluetooth controls not working: Check range. Ensure the AUX cable is not plugged in, as this disables Bluetooth controls.

HyperGear Portable Wireless Speaker

Get to Know Your Device

• 1: Microphone
• 2: Power ON/OFF Switch
• 3: Micro SD Card Slot
• 4: LED Indicator
• 5: Micro USB Charging Port
• 6: MODE
• 7: Previous Track, Volume Down
• 8: Play/Pause, Answer/End
• 9: Next Track, Volume Up

Instruction

How to Charge: Use the included Micro USB charging cable to connect your speaker to a USB power source. The LED indicator will be RED while charging and turn OFF when complete (approx. 3 hours).

How to Pair: Ensure the speaker's Power ON/OFF switch is OFF (LEFT). Slide the switch RIGHT to turn ON; the Blue LED light ring will flash BLUE. On your device, enable Bluetooth and select "HyperGear BT Speaker". Enter "0000" if prompted for a PIN. The BLUE light ring will disappear, and you will hear a tone upon successful pairing. The speaker will automatically reconnect to the last paired device.

How to Play via Micro SD Card: Turn the speaker ON and insert a Micro SD card into the slot. Music will play automatically. Press the Mode Button to switch between Bluetooth and Micro SD Card modes.

Troubleshooting

Speaker will not turn on: Ensure it is charged. Connect to a power source.

Speaker will not pair: Check if it is ON, in Pairing Mode, and within range. Ensure Bluetooth is enabled on your device. Charge both devices.

No music after pairing: Check range, volume levels on both devices, and ensure correct audio source is selected. Try re-pairing.

Sound too low/high/poor quality: Check range, volume settings, and potential interference from other devices. Try turning off Wi-Fi on your source device. Closing non-essential applications may improve audio quality.

Important Safety Information

Read all safety instructions and warnings before using these products. Improper use can lead to damage, excess heat, fire, explosion, electrical shock, or other hazards causing serious injury or property damage. The user is responsible for maintaining the product with care.

• Do not store in a depleted state; charge at least once every 3 months.
• Avoid excessively loud listening levels to prevent permanent hearing damage. Maintain volume levels that allow awareness of your surroundings.
• Do not store at extreme temperatures (below 40°F or above 90°F).
• Recharge using the included Micro USB cable or a certified 3rd party cable with a 2A adapter.
• Keep out of reach of children; these products are not toys.
• Do not attempt to modify, disassemble, or repair the products.
• Avoid excessive drops, bumps, abrasions, and rough handling.
• Discontinue use if the unit shows dents, punctures, tears, deformities, or corrosion.
• Immediately discontinue use if the product rapidly increases in temperature, emits odor, or shows abnormal phenomena.
• Disposal of units in garbage is unlawful under environmental laws.
• Units are not waterproof. Do not clean with harsh chemicals or submerge.
• Prop 65 Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.

Warranty Information

HyperGear warrants this product against defects in material and/or workmanship under normal use for a period of ONE (1) YEAR from the date of purchase by the original purchaser. Contact info@myhypergear.com to submit a warranty claim. Proof of purchase is required.

Limited One Year Warranty