HyperGear Activ8 Smartwatch + Fitness Tracker
User Manual
Overview
Read all safety instructions and warnings prior to using this product. See the end of this manual for detailed information.
Specifications
| Compatibility | Android 5.0+ / iOS 9.0 + |
| Bluetooth Version | 5.2 |
| Connection Range | Up to 33 ft (10 meters) |
| Battery Capacity | 300mAh |
| Power Input | 5V⎓1A |
| Charging Time | 2.5 hours |
| Battery Life | Basic Use: ~ 25 days Typical Use: ~ 5 to 7 days Heavy Use: ~ 2 to 3 days |
Package Contents
- Smartwatch
- Magnetic Charging Cable
- 3X Silicone watch bands
Change the Strap
Remove
Firmly pull the pin inward to release the wrist band from the watch.
[Diagram showing how to remove a watch strap by pulling the pin inward]
Attach
Insert the end of the pin into the watch.
Firmly pull and hold the pin inward. Slide the band into position then release the pin.
[Diagram showing how to attach a watch strap by inserting the pin and sliding it into place]
Getting Started
Get the App
Scan the QR code to download and install "Da Fit" from the App Store or Google Play.
[QR Code for Da Fit App]
Set Up & Pairing
- Ensure Bluetooth is enabled on your device
- Open the App
- Select "Activ8" from the list of devices
- Accept the Bluetooth pairing request
- Set up your profile
Charging
NOTE: Fully charge before first use (~ 2.5 hours). Always use the included magnetic charging cable and a compatible USB power source.
[Diagram showing the magnetic charging cable connected to the smartwatch]
Controls
Buttons
- Crown: Press & Hold 3 sec for Power ON/OFF; Press 1X to Wake Up Screen
- Multifunction (MFB) Button: Press 1X for Exercise Menu
- Microphone
- Speaker
Touchscreen
- Swipe UP: Messages
- Swipe LEFT: App Menu
- Swipe RIGHT: Favorite Apps
- Swipe DOWN: Control Center
[Diagram illustrating touchscreen gestures: Swipe Up for Messages, Swipe Left for App Menu, Swipe Right for Favorite Apps, Swipe Down for Control Center. The watch face is shown in the center displaying steps, calories, and date.]
Safety Instructions
Read all safety instructions and warnings prior to using this product. Improper use and failure to follow safety guidelines could result in damage, excess heat, toxic fumes, fire, explosion, electrical shock, or other hazards causing serious and/or fatal injury and/or property damage that is not the manufacturer's responsibility. The user is responsible for maintaining this product with care for maximum use.
IMPORTANT
This device is for wellness purposes only and not intended for medical use. Health app data is approximate and not intended to replace traditional methods of diagnosis or for treatment of medical conditions. Always consult a qualified healthcare professional.
IP67 Dust & Water Proof
1. This watch is not fully waterproof. Do not submerge. Do not use in the shower or when swimming. Do not clean with harsh chemicals, soaps, or detergents.
2. Recharge with the included charging cable and a 5W power source only. More powerful chargers may damage/overheat the battery or cause a fire hazard.
3. Do not store in a depleted state. Battery cells may be damaged. Charge at least once every 3 months even when not in use.
4. Do not store at extreme temperatures (below 14°F or above 122°F). Battery cells may be damaged.
5. Do not attempt to modify, disassemble, or repair this product.
6. Avoid excessive drops, bumps, and abrasions.
7. If the device has dents, punctures, tears, deformities, or corrosion, discontinue use and contact the manufacturer or dispose of in an appropriate method.
8. If you find this product rapidly increasing in temperature, emitting odor, deformed, abraded, or demonstrating an abnormal phenomenon, discontinue use immediately.
9. Do not use in the vicinity of flammable liquids or gases, propane tanks, large engines, high-voltage devices, or heat sources such as radiators and ovens.
10. Disposal of the watch in the garbage is unlawful under state and federal environmental laws and regulations.
Legal Notice
FCC Compliance: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Bluetooth®: The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HyperGear is under license. Other trademarks and trade names are those of their respective owners.
Warranty: Contact info@myhypergear.com to submit a warranty claim. Proof of purchase is required.
