ZEALOT-S67 Wireless Speaker Quick Start Guide

Packing Content

• ZEALOT-S67 Wireless Speaker
• Quick Start Guide

Getting Started

Power On/Off

[Diagram Description]: A diagram shows the speaker with a prominent button labeled 'ON/OFF'. This button controls the power state of the device.

[Power Button]: Press the ON/OFF button to power the device on or off.

Wireless Connection

[Diagram Description]: Illustrations depict the speaker with a Bluetooth symbol indicating wireless connectivity. One visual shows the speaker's indicator light flashing, signifying it's ready for pairing. Another shows a mobile device successfully connecting to the 'ZEALOT-S67'.

[Bluetooth Indicator]: The indicator light flashes when the speaker is in pairing mode.

To connect wirelessly:

1. Turn on Bluetooth on your device and search for "ZEALOT-S67".
2. Select "ZEALOT-S67" to connect.

Once connected, the indicator light will remain solid.

Mode Switch

[Diagram Description]: A visual highlights a button labeled 'MODE', used for cycling through different audio settings.

[Mode Button]: Press the MODE button to cycle through different audio modes.

Play Control

[Diagram Description]: Diagrams display control buttons for playback functions: a central button for Play/Pause and Call management, '+' for volume up and next track, and '-' for volume down and previous track.

• Play/Pause: Press the Play button to play or pause music.
• Next Track: Press and hold the '+' button to skip to the next track.
• Previous Track: Press and hold the '-' button to go to the previous track.
• Volume Up: Press the '+' button to increase volume.
• Volume Down: Press the '-' button to decrease volume.
• Call: Press the Play button to answer or end a call. Press and hold to reject a call.

Technical Specifications

PARTYADD Functionality

Connecting Multiple Speakers

[Description]: This feature allows connecting multiple ZEALOT-S67 speakers for a synchronized audio experience.

[Steps]:

1. Ensure both speakers are turned on and within 1 meter (approx. 3.3 feet) of each other.
2. On one speaker, press and hold the designated connection button (refer to diagram for button location, likely the Power or Mode button). A prompt tone will indicate the connection attempt.
3. A second prompt tone confirms successful pairing between the speakers.
4. On your mobile device, ensure Bluetooth is enabled and connect to "ZEALOT-S67".
5. Play music to test if both speakers are playing simultaneously.

Equalizer Modes

[Description]: The speaker offers different sound profiles accessible via the MODE button.

• Vocal Mode: Press the MODE button. The indicator light turns green and stays solid. This mode emphasizes vocal clarity.
• Bass Mode: Press the MODE button again. The indicator light turns orange and stays solid. This mode enhances low frequencies for a deeper bass sound.
• Normal Mode: Press the MODE button a third time. The indicator light turns blue and stays solid. This is the standard audio profile.

Compliance and Safety Information

FCC Compliance

[Statement]: This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by reorienting or relocating the receiving antenna, increasing the separation between the equipment and receiver, connecting the equipment into an outlet on a circuit different from that to which the receiver is connected, or consulting the dealer or an experienced radio/TV technician.

Radiation Exposure Statement

[Statement]: The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

FCC ID

[ID]: 2AFKR-S67

Innovation, Science and Economic Development Canada Compliance

[Statement]: This device contains licence-exempt transmitters/receivers that comply with Innovation, Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device.

IC

[ID]: 31343-S67

RoHS Compliance

[Description]: The document includes a table indicating the presence of hazardous substances in electronic product components. The table lists components like Printed Circuit Board, User Manual, Plastic and Polymer Parts, and Standard Battery, and their content levels for Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr6+), Polybrominated Biphenyls (PBB), and Polybrominated Diphenyl Ethers (PBDE). 'o' indicates content below the limit, and 'X' indicates content exceeding the limit. The 'X' marked components comply with EU Directive 2002/95/EC.

[Usage Period]: The product is designed for 10 years of use under specified conditions without leakage of toxic or hazardous substances that could cause pollution or harm.

General Compliance Marks

[Marks]: CE, FCC, [Made in China], [RoHS Recyclable Packaging]

[Model Number]: ZA-S67-20240508