Frigidaire FPHT1897TF Top Mount Refrigerator
18.0 Cu. Ft.
Signature Features
- Humidity-Controlled Crisper Drawers: Designed to keep fruits and vegetables fresh.
- SpillSafe® Shelves: Designed to contain spills, making cleanup easier.
- 1/2-Width Deli Drawer: Offers convenient storage for deli meats and cheeses.
- Ice-Ready: Refrigerator is equipped to allow for later installation of an ice maker.
More Easy-to-Use Features
- Bright LED Lighting: Illuminates the interior to help users find food faster.
- Smudge-Proof™ Stainless Steel: Resists fingerprints and cleans easily.
- ENERGY STAR®-Certified: Maximizes energy and dollar savings.
Product Dimensions
| Dimension | Measurement |
|---|---|
| Height (Including Hinges & Rollers) | 66-5/8" |
| Width | 29-5/8" |
| Depth (Including Door) | 29-7/8" |
| Depth with Door Open 90° | 58-1/2" |
Diagram Description: The refrigerator's external dimensions are illustrated. Dimension A (Height) is 66-5/8 inches. Dimension B (Width) is 29-5/8 inches. Dimension C (Depth) is 29-7/8 inches. The depth with the door opened 90 degrees is 58-1/2 inches.
Specifications
| Specification | Value |
|---|---|
| Total Capacity (Cu. Ft.) | 18.0 |
| Refrigerator Capacity (Cu. Ft.) | 14.1 |
| Freezer Capacity (Cu. Ft.) | 3.9 |
| Power Supply Connection Location | Right Bottom Rear |
| Water Inlet Connection Location | Bottom Left |
| Voltage Rating | 120V/60Hz |
| Connected Load (kW Rating) @ 120 Volts | 0.72 |
| Amps @ 120 Volts | 6.0 |
| Minimum Circuit Required (Amps) | 15 |
| Shipping Weight (Approx.) | 220 Lbs. |
Installation Specifications
Clearances:
- Rear: 1" minimum clearance for air circulation and connections.
- Sides and Top: 3/8" minimum clearance for ease of installation.
- Door Opening: When installing adjacent to a wall, sufficient handle clearance is required for a 90° door opening. For optimal 140° door swing and full crisper access, a 20" clearance from the front edge of the unit to an adjacent wall, cabinet, or appliance is recommended. A 3" minimum clearance will only allow for a 90° door swing, limiting crisper access and removal.
Diagram Description (Top View): Illustrates installation clearances, showing a 1-inch rear clearance, 3/8-inch side and top clearances, and the placement of a recessed electrical outlet and a recessed water line for ice maker models.
Diagram Description (Side View): Shows the refrigerator's dimensions and connection points. The water line inlet is located at the bottom left rear, and the power cord is at the bottom right rear. Height with rollers is 66-5/8 inches; without rollers, it's 65-3/8 inches.
Installation Environment:
- Do not install in areas where temperature drops below 55°F (13°C) or rises above 110°F (43°C).
- Avoid direct sunlight or proximity to heat sources like ranges or dishwashers.
- Ensure the front grille remains unobstructed for proper ventilation.
- Recess electrical outlets when possible.
- A water recess on the rear wall is recommended to prevent water line damage.
- Water pressure for the cold water line must be between 30 and 100 psi.
- Use 1/4" O.D. copper tubing for the water supply line, with sufficient length to reach the household water supply plus an additional 7 feet.
- Adjustable front rollers assist with door alignment.
Optional Accessories:
- Ice Maker Kit (Part # IM116) is available.
Contact Information
For detailed installation instructions and accessory information, visit frigidaire.com or frigidaire.ca.
USA: 10200 David Taylor Drive, Charlotte, NC 28262, 1-800-FRIGIDAIRE, frigidaire.com
CANADA: 5855 Terry Fox Way, Mississauga, ON L5V 3E4, 1-800-265-8352, frigidaire.ca
