Denver CRLB-400 Instruction Manual
Model: CRLB-400
Brand: Denver
Website: www.denver-electronics.com
Please read this instruction manual completely for optimal usage.
Product Diagram and Button Functions
The Denver CRLB-400 features a variety of buttons and indicators for its functions. Below is a description of each component:
No. | Icon/Name | Description |
---|---|---|
1 | PM icon | Indicates time of the afternoon. |
2 | NS icon | Nature Sound mode indicator. |
3 | BT icon | Bluetooth mode indicator. |
4 | FM icon | FM radio mode indicator. |
5 | AU icon | Auxiliary (AUX) mode indicator. |
6 | TF icon | TF/USB card mode indicator. |
7 | Sleep icon | Sleep mode indicator. |
8 | LED light | Indicates the LED light is active. |
9 | Alarm clock 1 icon | Indicates Alarm Clock 1 is enabled. |
10 | Digital display | LED display for time and information. |
11 | Alarm clock 2 icon | Indicates Alarm Clock 2 (FM Radio alarm) is enabled. |
12 | Sleep mode button | Short press to enter sunset sleep light mode with timer options (30, 60, 90 minutes). The light gradually dims and turns off at the set timer. If radio or music is playing, it also turns off. When the unit is powered off, pressing any front panel button displays the clock for 20 seconds. To turn the unit on, press and hold the power button. |
13 | Alarm clock 2 button |
|
14 & 16 | Brilliance control button | Press to increase LED brightness or adjust time. Press to decrease brightness or adjust time. (This button controls both increasing and decreasing brightness, as well as time adjustment). |
15 | Light button |
|
17 | Alarm clock 1 button |
Setting 7 kinds of natural sounds as alarm source:
Press and hold this button to activate or deactivate the alarm. Press this button to turn off the alarm sound when the alarm rings. |
18 | Clock button | Works only when the unit is switched on:
|
19 | Snooze button | Short press this button to enter snooze mode when alarm rings. The alarm rings again after 9 minutes. The unit enters snooze mode automatically if the alarm rings for 3 minutes without any operation. This cycle repeats three times at most. |
20 | Speakers | Speaker output. |
21 | MIC | Microphone input. |
22 | AUX connector | Connect to an external audio device using a 3.5mm audio cable. |
23 | USB port | Connect a USB flash drive to play music. |
24 | Button for previous track | Press to skip to the previous track. Long press to decrease volume. |
25 | Button to play/pause music, answer phone call |
|
26 | Button for next track, or volume increasing | Press to skip to the next track. Long press to increase volume. |
27 | Power/MODE button |
|
28 | TF card slot | Connect a Micro SD card to play music. |
29 | DC 5V port | Connect to the power supply. |
Usage Instructions
Pairing with a Bluetooth Device
- Press and hold the MODE button for 3 seconds until you hear a tone; the unit turns on. Then press the MODE button to switch to Bluetooth mode.
- On your Bluetooth-enabled device, turn on Bluetooth and search for Bluetooth devices. Select "Denver CRLB-400" from the list. If prompted for a password, enter "0000".
- When successfully paired, you will hear a tone.
- Once paired, the unit will remember the device and connect automatically when Bluetooth is activated and the device is in range. You do not need to re-pair previously connected devices.
Listening to FM Radio
Press the MODE button to switch to FM radio mode. Up to 15 FM stations can be stored after performing an auto-search.
Playing Music Through AUX
Using a 3.5mm audio cable, connect your device (smartphone or MP3 player) to the AUX connector on this unit.
Playing Music Through Micro SD Card / USB
After the unit is turned on, insert your Micro SD card into the card slot. The unit automatically switches to Micro SD card mode and starts playing music. Bluetooth mode is disabled. Use the controls on this unit to adjust volume and skip to the previous or next track.
Compliance and Safety Information
Notice: All products are subject to change without any notice. Denver takes reservations for errors and omissions in the manual.
Copyright: ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S
Environmental Disposal (WEEE Symbol):
Electric and electronic equipment and included batteries contain materials, components, and substances that can be hazardous to your health and the environment if not handled correctly. The equipment and batteries are marked with the crossed-out trash can symbol ?️. This symbol signifies that electric and electronic equipment and batteries should not be disposed of with other household waste but should be disposed of separately.
As the end user, it is important to submit your used batteries to the appropriate and designated facility. This ensures batteries are recycled in accordance with legislature and do not harm the environment.
Cities have collection points for electric and electronic equipment and batteries, available free of charge at recycling stations or collection sites, or collected from households. Additional information is available from your city's technical department.
Declaration of Conformity:
Hereby, Inter Sales A/S declares that the radio equipment type CRLB-400 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.denver-electronics.com. Navigate to the website, click the search icon on the topline, enter model number "CRLB-400", go to the product page, and find the directive under downloads/other downloads.
Technical Specifications:
- Operating Frequency Range: 18MHz-20kHz
- Max Output Power: 2x3W
Manufacturer Information:
DENVER ELECTRONICS A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
Connect with us: www.facebook.com/denverelectronics