Rough Country MOLLE Front Bed Panel
Designed for the 2024 Toyota Tacoma
Product Overview
This document provides installation instructions for the Rough Country MOLLE Front Bed Panel, a versatile storage and organization solution for the 2024 Toyota Tacoma truck bed. Rough Country recommends professional installation by a certified technician to ensure proper fitment and safety.
Key Features & Contents
The kit includes the necessary components for installation:
- Front MOLLE Panel (D)
- Front MOLLE Panel Lower Brackets (E)
- Front MOLLE Panel Top Brackets (F)
- Hardware: 6mm x 20mm Button Head Bolts (A), 6mm Body Clip Nuts (B), 6mm Flat Washers (C)
- Velcro Straps with Buckles
Tools Required: T50 Torx, T30 Torx, 4mm Allen Wrench, Ratchet Wrench.
Installation Summary
The installation process involves attaching mounting brackets to the vehicle's bed rails using factory hardware and supplied components. The MOLLE panel is then secured to these brackets. Key steps include:
- Installing clip nuts onto mounting brackets.
- Removing factory bed rail bolts.
- Mounting the top and lower brackets to the bed rail system.
- Attaching the MOLLE panel to the brackets using bolts and washers.
Refer to the detailed diagrams and photo references within the original document for precise placement and tightening procedures.
Post-Installation & Maintenance
After installation, it is crucial to check all fasteners for proper torque and ensure adequate clearance between vehicle components. A re-torque of all fasteners is recommended after 500 miles. Regular visual inspections and periodic re-torquing during routine vehicle service are advised. Professional inspection of wheel alignment, steering, suspension, and driveline systems is recommended every 3000 miles.
Important Safety Information
Product Use Information: Users should be aware that taller vehicles may be more prone to rollovers. Seat belts and shoulder harnesses must be worn at all times. Modifications to increase vehicle height beyond the intended design of Rough Country products are not recommended. Mixing component brands is also not advised.
Notice to Dealer and Vehicle Owner: Vehicles equipped with Rough Country products should display a "Warning to Driver" decal to remind operators of unique handling characteristics. The installing dealer is responsible for applying this decal and providing the owner with these installation instructions.
