Product Overview
This document provides essential information for the HOMCOM office chair, model IN221100110V01_GL. It includes important safety guidelines, maintenance instructions, and step-by-step assembly procedures. Please read this manual carefully before use and retain it for future reference.
Safety Information ⚠️
Intended Use: This product is designed for indoor use only, suitable for work and study environments.
Maximum Weight Capacity: 120 KG
- To prevent the chair from tipping, ensure the weight is evenly distributed.
- Before assembly, remove all parts from the box and verify that all components are included.
- Always keep your feet on the floor. Do not press your head against the headrest when reclining.
- When adjusting the backrest, ensure your fingers are safe and clear of pinch points.
- To avoid damage, do not pull the chair quickly or forcefully.
- This chair is designed solely for sitting.
- Do not use the chair as a base or a ladder.
- Do not sit on the armrests.
- This chair is designed to seat only one person at a time.
- If any parts are missing, damaged, or worn, stop using the chair immediately.
- Avoid direct sunlight on the chair to prevent plastic components from becoming brittle.
Warning! Replacement or repair of components for height adjustment mechanisms (especially those with energy storage) must only be performed by qualified personnel.
Maintenance Instructions ⚙️
- Clean the chair using a vacuum cleaner.
- Wipe the chair with a fabric dampened with water.
Assembly Instructions ?
Parts List
| Part ID | Description | Quantity |
|---|---|---|
| A | Caster (Wheel) | 5 |
| B | Chair Base (Star-shaped) | 1 |
| C | Gas Lift Cylinder | 1 |
| D | Seat Mechanism | 1 |
| H | Seat and Backrest Assembly (with armrests) | 1 |
Hardware List
| Part ID | Description | Quantity |
|---|---|---|
| E | Screw (M6*16) | 4 |
| F | Screw (M6*20) | 4 |
| G | Allen Wrench | 1 |
| I | Washer | 8 |
Step-by-Step Assembly
Step 01
Insert the five casters (A) into the legs of the star-shaped chair base (B). Then, insert the gas lift cylinder (C) into the center hole of the chair base (B). An arrow indicates downward insertion.
Step 02
Attach the seat mechanism (D) to the underside of the seat and backrest assembly (H) using four screws (E or F) and four washers (I). Attach the armrests (J) to the seat assembly using the remaining screws (E or F) and washers (I). Use the provided Allen wrench (G) to tighten. Note: Do not confuse similar screws.
Step 03
Place the assembled seat and backrest unit onto the gas lift cylinder (C) on the chair base. The chair is now fully assembled.
Customer Support and Contact Information
United States (US)
Contact our customer care center:
Phone: 001-877-644-9366
Email: customerservice@aosom.com
Imported by: Aosom LLC, 27150 SW Kinsman Rd, Wilsonville, OR 97070 USA. Made in China.
Canada (CA) & France (FR)
Contact our customer care center:
Phone: 416-792-6088
Email: customerservice@aosom.ca
Imported by: Aosom Canada Inc., 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9. Made in China.
France Contact: Phone: 0033-1-84166106, Email: aosom@mhfrance.fr. Imported by: MH France 2, rue Maurice Hartmann 92130 Issy-les-Moulineaux. Fabriqué en Chine.
Spain (ES) & Portugal (PT)
Contact our Customer Service Center:
Spain Phone: 0034-931294512
Spain Email: atencioncliente@aosom.es
Portugal Phone: 0034-931294512 (Mon-Fri 7:30 AM - 4:30 PM)
Portugal Email: info@aosom.pt
Importer (Spain/Portugal): SPANISH AOSOM, S.L., C/ ROC GROS, N° 15, 08550, ELS HOSTALETS DE BALENYÀ, SPAIN. WWW.AOSOM.ES / WWW.AOSOM.PT. Hecho en China.
Germany (DE)
Contact our Customer Service Center:
Phone: 0049-0(40)-88307530
Email: service@aosom.de
Importer Address: MH Handel GmbH, Wendenstraße 309, D-20537 Hamburg, Germany. Made in China.
United Kingdom (UK)
Contact our customer care center:
Phone: 0044-800-240-4004
Email: enquiries@mhstar.co.uk
Importer Address: MH STAR UK LTD, Unit 27, Perivale Park, Horsenden lane South, Perivale, UB6 7RH. Made in China.
Italy (IT)
Please contact our customer assistance center:
Phone: 0039-0249471447
Email: clienti@aosom.it
Imported by: AOSOM Italy srl, Centro Direzionale Milanofiori, Strada 1 Palazzo F1, 20057 Assago (MI). P.I.: 08567220960. Fatto in Cina.
Recycling Information ♻️
The document includes symbols indicating options for disposal: "DONNEZ OU RECYCLEZ" (Give or Recycle), "ASSOCIATION" (Association), "LIVRAISON" (Delivery/Collection), "DÉCHÈTERIE" (Waste Disposal Center). Further information can be found at Adresses sur quefairedemesdechets.fr.
