HOMCOM 839-453V00 Upholstered Velvet Swivel Chair
Important Information
IMPORTANT: RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.
Product Usage and Care
This chair is intended for domestic use only.
Instructions for Use
- Place the chair stably on a flat floor.
- Keep away from open flames or heat sources.
- Avoid overloading the chair.
Precautions Before Assembly
- Prepare a clean and dry mounting area.
- Verify that the product is not damaged.
- Check that none of the pieces are missing.
Maintenance
- Clean with a soft fabric.
- Regularly check the seating and structure.
Storage Conditions
- Store the fabric completely dry, in a clean and dry place to avoid the risks of mold.
Safety Warnings
- Beware of crushing and cutting hazards during assembly.
- The manufacturer declines all responsibility in case of damages due to improper installation or environmental factors.
- If the seating is fitted with powered seat height adjustments, only trained personnel may replace or repair those components.
Assembly Instructions
Parts and Hardware
| Part | Description | Quantity |
|---|---|---|
| A | Screw M6*20 | 4 (+1 spare) |
| B | Screw M8*70 | 1 (+1 spare) |
| I | Washer | 1 (+1 spare) |
| F | Allen Key | 1 |
| C | Base (R350mm) | 1 |
| D | Gas Lift (L100mm) | 1 |
| E | Mechanism | 1 |
| G | Seat | 1 |
| H | Armrest | 1 |
Assembly Steps
Step 1: Attach the mechanism (E) to the underside of the seat (G) using screws (B) and the Allen key (F). Attach the armrests (H) to the sides of the seat (G).
Visual description: Diagram shows seat (G) with mechanism (E) being attached from below with screws (B) and Allen key (F). Armrests (H) are shown attaching to the sides.
Step 2: Insert the gas lift (D) into the center of the base (C).
Visual description: Diagram shows the star-shaped base (C) with the gas lift (D) being inserted downwards into its central opening.
Step 3: Place the assembled seat unit (from Step 1) onto the gas lift (D). Secure the mechanism (E) to the gas lift (D) using screws (A) and the Allen key (F).
Visual description: Diagram shows the seat assembly being lowered onto the gas lift (D) already in the base (C). Screws (A) are shown being used to connect the mechanism (E) to the gas lift.
Step 4: Ensure all connections are secure. The chair assembly is now complete.
Visual description: Diagram shows the fully assembled chair.
Customer Support and Contact Information
If you have any questions, please contact our customer care center. Our contact details are below:
United States (US)
- Phone: 001-877-644-9366
- Email: customerservice@aosom.com
- Importer: Aosom LLC, 27150 SW Kinsman Rd Wilsonville, OR 97070 USA
- Made in: CHINA
Canada (CA)
- Phone: 416-792-6088
- Email: customerservice@aosom.ca
- Importer: Aosom Canada Inc., 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9
- Made in: CHINA
United Kingdom (UK)
- Phone: 0044-800-240-4004
- Email: enquiries@mhstar.co.uk
- Importer: MH STAR UK LTD, Unit 27, Perivale Park, Horsenden lane South Perivale, UB6 7RH
- Made in: CHINA
Germany (DE)
- Phone: +49 40 87408465
- Email: service@aosom.de
- Importer/Manufacturer/REP: MH Handel GmbH, Wendenstraße 309, D-20537 Hamburg, Germany
- Made in: CHINA
Italy (IT)
- Phone: 0039-0249471447
- Email: clienti@aosom.it
- Importer/Manufacturer/REP: AOSOM Italy srl, Centro Direzionale Milanofiori, Strada 1 Palazzo F1, 20057 Assago (MI)
- Made in: CHINA
Spain (ES)
- Phone: 0034-931294512
- Email: atencioncliente@aosom.es
- Importer/Manufacturer/REP: SPANISH AOSOM, S.L., C/ROC GROS,N°15.08550, ELS HOSTALETS DE BALENYÀ, SPAIN.
- Made in: CHINA
Portugal (PT)
- Phone: 0034-931294512
- Email: info@aosom.pt
- Importer/Manufacturer/REP: SPANISH AOSOM, S.L, C.ROC GROS N.15, 08550. ELS HOSTALETS DE BALENYÀ
- Made in: CHINA
France (FR)
- Phone: 0033-1-84166106
- Email: aosom@mhfrance.fr
- Importer/Manufacturer/REP: MH FRANCE, 2 Rue Maurice Hartmann, 92130 Issy Les Moulineaux, France
- Made in: CHINA
Recycling Information
♻️ DONNEZ OU RECYCLEZ
- ASSOCIATION
- LIVRAISON
- DÉCHÈTERIE
Adresses sur quefairedemesdechets.fr
