Huawei 5G Wi-Fi Router Quick Start Guide
Product Overview
This section provides an overview of the Huawei 5G Wi-Fi Router, detailing its ports, buttons, and indicators.
The router features several ports and controls:
- Port 1: Landline phone port (Optional. Actual product appearance and functions prevail.)
- Port 2: LAN port
- Port 3: LAN/WAN port
- Port 4: Power input
- Slot 5: SIM card slot
- Button 6: Reset button
- Button 7: Power button
- Feature 8: Ambient light strip
- Button 9: H button
- Indicator 10: Wi-Fi® indicator
- Indicator 11: 4G signal indicator
- Indicator 12: 5G signal indicator
The router is depicted in front, side, and top views, illustrating the placement of these components.
Setup
SIM Card Installation
Ensure you use the correct SIM card. The router supports three types:
- mini-SIM (2FF)
- micro-SIM (3FF)
- nano-SIM (4FF)
To install the SIM card:
- Open the SIM card cover.
- Insert the SIM card gently into the SIM card slot until it clicks.
- Close the SIM card cover.
Note: To remove the SIM card, gently press it until it pops out. Do not insert or remove a SIM card while the router is running, as this may affect performance or damage the card.
Connecting Power
? Connect the power adapter to the router. The indicators will turn on once the router has successfully connected to a network.
Connecting to Your Wi-Fi Network
Once the router is connected to a mobile data network, you can connect your computer or mobile phone to the router's Wi-Fi network to access the Internet. The default Wi-Fi network name (Wi-Fi Name) and password (Wi-Fi Password) are typically found on a label on the bottom of the router.
Key points:
- When the Wi-Fi indicator is steady on, Wi-Fi is enabled. Refer to the router's web-based management page to enable or disable Wi-Fi.
- For security, promptly change the Wi-Fi network name and password on the web-based management page to prevent unauthorized access. You will need to reconnect your devices after changing the password.
- If the H button is accidentally pressed, the Wi-Fi indicator may start to flash. Wait for it to stop flashing (this may take about two minutes).
Managing Your Router
You can manage the router using its web-based management page or the HUAWEI AI Life app. The default IP address and password are usually found on the router's label.
? It is recommended to change the default login password for the web-based management page to prevent unauthorized access to your router's settings.
Optional Configurations
Connecting a Computer
You can connect a computer to the router via an Ethernet cable plugged into a LAN port to access the Internet.
Accessing the Internet via Ethernet Port
The router can also connect to the Internet through a wall-mounted Ethernet port using an Ethernet cable. Ensure relevant settings are configured on the web-based management page before connecting.
Frequently Asked Questions (FAQs)
How do I restore factory settings?
Press the Reset button for approximately 3 seconds using a pointed object until the ambient light strip blinks. This restores the router to its default settings.
What if I forgot the Wi-Fi password or login password?
Restore the router to its factory settings and use the default Wi-Fi and login passwords.
What if the 5G/4G signal indicators are off or no internet connection?
- Check if the SIM card is inserted correctly.
- If the issue persists, restore to factory settings and try again.
- Contact your carrier to check if your SIM card is out of service or needs activation.
What if the internet speed is slow?
- Check the 5G/4G signal indicators. If red, adjust the router's direction or position near a window.
- If connected via Wi-Fi, adjust your device's position for better signal.
- Switch to Wi-Fi 5 GHz if supported by your device.
- Restart the router and your device.
- Check if you have reached your monthly data limit, which may result in throttling by your carrier.
How can I connect using WPS?
Press the H button on the router; the Wi-Fi indicator will flash. Enable WPS on your device within 2 minutes to connect.
How do I use the H button to pair with a HUAWEI HiLink device?
When a HUAWEI HiLink device is detected, the Wi-Fi indicator flashes. Pressing the H button makes it flash faster, initiating connection. The indicator stops flashing upon successful pairing.
Why can't I access the router's web-based management page?
- Ensure your computer is connected via Ethernet or Wi-Fi.
- Verify your computer obtains IP and DNS addresses automatically.
- Restart your browser or try a different one.
- If problems persist, restore the router to factory settings.
Why is the web management page content not up to date?
? Clear your browser's cache and relaunch the web-based management page.
Experiencing other issues?
- Restart the router.
- Restore the router to its factory settings.
- Contact your carrier.
Legal Notice and Safety Information
Legal Notice
Copyright © Huawei 2020. All rights reserved. This manual may not be reproduced without Huawei's written consent. The product may contain copyrighted software. Trademarks include HUAWEI, LTE, 5G, and Wi-Fi®. Huawei reserves the right to modify specifications without notice.
Disclaimer: Contents are provided "AS IS". Huawei disclaims all warranties. Liability is limited to the purchase price of the product.
Import and Export Regulations: Users must comply with all applicable export/import laws.
Privacy Policy: For details on data usage, visit http://consumer.huawei.com/privacy-policy.
Software Update
The device may automatically obtain software update information from Huawei or your carrier to provide better service. This process uses mobile data and requires device identifiers.
Safety Information
Electronic Device: Do not use if prohibited or if it causes danger/interference.
Interference with Medical Equipment: Maintain 15 cm distance from pacemakers. Follow hospital rules.
Flammables/Explosives: Do not use in hazardous environments. Do not store/transport with flammables.
Operating Environment: Avoid dusty, damp, dirty, or magnetic environments. Disconnect power before handling. Place on a stable surface. Keep away from strong magnetic/electric fields (microwaves, refrigerators). Protect from lightning. Ideal operating temperatures: 0°C to 40°C. Ideal storage: -20°C to +70°C. Keep in a well-ventilated area, away from direct sunlight. Avoid rain/moisture. Keep away from heat sources (heaters, stoves). Do not place objects on the device. If foreign objects/liquids enter, stop use, power off, disconnect cables, and contact service. Do not block openings (maintain 10 cm clearance for heat dissipation). Stop use if overheated. Do not touch the antenna.
Child Safety: Keep away from children; detachable parts may pose a choking hazard. Adult supervision is required for children.
Accessories: Use only approved accessories to avoid hazards and warranty issues.
Power Adapter Safety: The power plug is a disconnect device. Ensure socket-outlets are accessible. Unplug when not in use. Do not drop or impact the adapter. If damaged, seek service. If the power cable is damaged or the plug is loose, stop use immediately due to shock/fire risk. Do not touch cords/adapter with wet hands. If exposed to liquids, seek service. Ensure adapter meets safety standards (IEC60950-1/EN60950-1/UL60950-1).
Cleaning and Maintenance: Keep dry and protected from collision. Do not use external heat sources for drying. Avoid extreme temperatures. Avoid collisions. Power off and disconnect cables for extended storage.
Disposal and Recycling: Dispose of electronics and batteries at designated collection points ([wheelie-bin-symbol]). Visit http://consumer.huawei.com/en/ for more information.
Reduction of Hazardous Substances: Compliant with REACH, RoHS regulations. Declarations available at http://consumer.huawei.com/certification.
EU Regulatory Conformance: Huawei declares compliance with Directive 2014/53/EU. The Declaration of Conformity (DoC) is available at http://consumer.huawei.com/certification. Restrictions apply in certain EU countries for the 5 GHz band (indoor use only for 5150-5350 MHz).
Frequency Bands and Power: Radio equipment operates within specified bands, with maximum power less than the highest limit values. Specific power limits for LTE and 5G NR bands, and Wi-Fi 2.4G/5G are detailed.
Accessories and Software Information: Recommended adapters (e.g., HW-120200X01) and software version (e.g., 10.0.3.11) are mentioned. Users cannot access or change RF parameters.
