Scosche NEXC1 Smart Dash Cam User Manual and Installation Guide

Introduction

Please read this manual completely before installation to familiarize yourself with the NEXC1.

Avoiding Legal Issues

Before installation, check all European, national, and local laws. It is the user's responsibility to comply with all applicable laws regarding the use of electronic devices while driving.

⚠️ CAUTION!

Before installation, disconnect the negative terminal of the vehicle's battery to prevent electrical damage. Avoid any airbag wiring from the manufacturer – airbags may deploy accidentally, causing serious injury or death.

Safety Instructions

Check the power cable and do not use it if damaged.
Do not mount it where it obstructs the driver's view of the road or could impede airbag deployment. Check local and national laws before connecting the NEXC1.
Clean the lens with a soft cloth, ensuring there are no smudges.
Prevent any contact of liquid or moisture with the device.
Do not expose the NEXC1 to open flame, as it may be damaged.
Keep out of reach of children.
Scosche Industries Inc. and Sunnysoft s.r.o. are not responsible for data loss during operation.

NEXC1 Package Contents

The NEXC1 is a WiFi Dash Cam with a wide-angle lens (140°) that works with your smartphone and the Nexar app. It records your drive, saves important events to the Nexar Cloud, provides video recordings, and facilitates submitting data to insurance companies in case of an accident.

Included items:

NEXC1 Dash Camera
Adjustable Adhesive Mount
Power USB Cable and 24W Dual USB Car Charger
Cable Management Kit:
- Cleaning Wipes (1 wet, 1 dry)
- Rubber Bands (4 pcs)
- Cable Ties (5 pcs)
- Adhesive Cable Clips (4 pcs)
- Panel Removal Tool (1 pc)

Product Description

The NEXC1 dash camera features the following components:

1 - USB-C Power Connector: For connecting the power cable.
2 - Quick Release Slot: Allows for easy attachment and detachment of the camera from the mount.
3 - 140° Wide-Angle Lens: Equipped with a Sony 1080p Full HD image sensor for clear recordings, even in low light.
4 - LED Indicator:
- Off: Camera is powered off.
- Solid Red: Camera is powered on, but not recording.
- Flashing Red: Camera is powered on and recording.
5 - Microphone: Captures audio from the vehicle's interior.
6 - Event Capture Button: A capacitive touch button to manually mark important driving events.
7 - Speaker: Outputs audio alerts or notifications.
8 - WiFi Connection Button: Used to initiate or manage the WiFi connection.
9 - Power Button: Press and hold for over 3 seconds to turn the camera on or off.
10 - microSD Memory Card Slot: For inserting the memory card to store recordings.

Memory Card

Inserting a Memory Card

Insert the memory card into the designated slot with the gold contacts facing the back of the camera body.
Push the memory card into the slot until it clicks into place.

Removing a Memory Card

Push the exposed edge of the memory card into the camera body until it clicks. Once released, the card will eject from the slot, allowing you to remove it.

POZOR! Remove the memory card only when the device is powered off. Attempting to remove the card while the device is in operation may cause damage to stored files or the memory card itself.

Camera Function Buttons

A – WiFi Connection Button

Press this button to switch to wireless connection to your device.

B – Power Button

Long Press: Press and hold for more than 3 seconds to turn the device on or off.
Short Press: Press to start or stop recording.

C – Event Capture Button

After pairing the camera with your smartphone, the camera will automatically record. Use this button to mark events.

Camera Mounting

Window Mount Assembly

Align and attach the top part of the adjustable adhesive mount to the bottom cable mount bracket (1).

Attaching Camera to Adhesive Mount

Insert the two extruded connecting pins on the adhesive mount into the quick-release slot on the camera (2).

Mounting and Adjusting Camera

Thoroughly clean and dry the windshield area where the unit will be mounted.
For a sleek, low-profile look, fold and detach the individual square pieces of the mount (3).
Carefully peel off the adhesive film from the bottom of the mount (4) and press firmly onto the chosen location for 1 minute to ensure good adhesion.

Power Cable Routing Solutions

❗ IMPORTANT! Read before routing the cable

To prevent potential damage to the power cable, mount and position the camera on the vehicle's windshield facing the direction you want to record before connecting and routing the power cable.

Option 1: Cable Routing with Panel Removal

(For vehicles without pillar airbags)

Thoroughly clean and dry the windshield areas where the adhesive camera mount will be attached.
Mount the camera assembly onto the windshield.
Plan your cable routing, referring to the illustration above.
Using the panel removal tool, carefully remove any necessary panels for your chosen cable route. Use clips to secure the cable within the headliner. (Note: Clips are not provided; it is recommended to explore your vehicle beforehand.)
Connect the power cable to the camera, then route the cable from the camera to the 12-volt source. Use the cable clips to secure the cable routing near the camera. (Note: Adhesive mounting clips for securing the power cable can be placed discreetly for a cleaner look. Secure the cable using loops and straps.)
Reassemble the panels in reverse order, hiding any excess coiled cable.

Option 2: Cable Routing Using Adhesive Clips

(For vehicles with pillar airbags)

Thoroughly clean and dry the windshield areas where the adhesive camera mount and the adhesive clips for holding the power cable will be attached.
Mount the camera assembly onto the windshield.
Plan your cable routing, referring to the illustration on the previous page.
Connect and route the cable from the camera to the 12-volt socket under the roofliner, along the edge of the windshield and near the panels/trim.
Route the USB cable using the provided adhesive rubber clips. If more clips are needed, use any of the remaining cut adhesive clips to help secure the cable in place.

How to Route the Power Cable?

Removable Adhesive Clips and Adhesive Cable Ties

Use the removable adhesive clips and adhesive cable ties to route the cable from the camera to the 12V power source (recommended for Option 2), as illustrated on the previous page.

Cable Reinforcement, Cable Ties, and Rubber Bands

USB cable reinforcement prevents the cable from slipping under the headliner. Use the included cable ties and rubber bands to secure excess cable or to fasten it along existing vehicle cable routing.

Smartphone Application

The Nexar app is available on the App Store and Google Play. The NEXC1 works seamlessly with the Nexar app. Download the app for recording and capturing events, accessing free cloud storage, instant crash reporting, and more.

Nexar App on iPhone® Devices

The Nexar app is available on the App Store.

Download the Nexar app by scanning the QR code above or searching for "Nexar" in the App Store. It is recommended to download the app while connected to a WiFi network.
Launch the app after downloading.
Follow the prompts to register and grant all necessary settings.

Connecting the Camera to iPhone® Devices

Turn on the camera. The camera automatically powers on when the vehicle is started and powers off when the vehicle is turned off. You can also turn the camera on by pressing and holding the power button for more than 3 seconds.
On your iPhone settings (not included), turn on and enable WiFi.
Connect to the WiFi network that starts with "Nexar" (e.g., NEXC1-5G).
Enter the password: 12345678.
After establishing the WiFi connection, complete your phone's setup.
Launch the Nexar app and tap the "Drive" button at the top of the screen to start recording.
Confirm that the video source on your phone is receiving input from the NEXC1, not from your phone's camera.

Note: Camera feed can be confirmed in two ways:

Cover your phone's camera lenses and check if the camera feed is displayed on your smartphone screen.
Check if the camera icon is active in the app.

Nexar App on Android Devices

The Nexar app is available on Google Play.

Download the Nexar app by scanning the QR code above or searching for "Nexar" in Google Play. It is recommended to download the app while connected to a WiFi network.
Launch the app after downloading.
Follow the prompts to register and grant all necessary settings.

Connecting the Camera to Android Devices

Turn on the camera. The camera automatically powers on when the vehicle is started and powers off when the vehicle is turned off. You can also turn the camera on by pressing and holding the power button for more than 3 seconds.
Once the camera is on, launch the Nexar app on your phone.
Tap the Menu icon and select Settings.
In the Settings menu, tap External Camera.

Note: Once you select the external camera, your phone will begin pairing with the camera; this process may take a moment.