Product Overview
The FIBARO Flood Sensor (FGFS-101) is a Z-Wave Plus compatible device designed to detect water presence and measure ambient temperature. It is battery-powered and features an LED indicator for signaling operational status.
The sensor is compatible with any Z-Wave network and can be controlled wirelessly. It is designed for easy installation and can be integrated into various smart home systems.
Key Features
- Z-Wave Plus certified
- Detects flood/water presence
- Measures ambient temperature
- Battery-powered ? for flexible placement
- LED indicator ? for status signaling
- Tamper-proof casing
- Compatible with any Z-Wave controller
- Easy installation
Installation
Mounting: The sensor can be placed on a flat surface or mounted using the included bracket. Ensure it is positioned where water ingress is most likely.
Battery Installation: Open the casing by gently pulling the two halves apart. Insert the battery (CR2450) according to the polarity markings.
Adding to Z-Wave Network: Follow the instructions for your Z-Wave controller to add the sensor to the network. Typically, this involves putting the controller into pairing mode and then pressing the tamper button on the sensor three times within a short period.
Sensor Placement: Place the sensor in areas prone to flooding, such as near washing machines, dishwashers, sinks, or water heaters. The probe can be extended using the included wire for hard-to-reach areas.
Operation
The sensor automatically detects water and sends signals to the Z-Wave controller. The LED indicator signals various states, such as successful inclusion, low battery, or sensor activation.
LED Indicator Meanings:
- Slow blinking: Z-Wave network communication
- Fast blinking: Z-Wave inclusion/exclusion
- Solid light: Sensor activated (water detected)
- Specific blinking patterns: Indicate low battery or other status
Technical Specifications
| Parameter | Value |
|---|---|
| Power Supply | CR2450 3V Lithium Battery ? |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Maximum Voltage | 3V |
| Dimensions | Sensor: 72 x 26 x 23 mm (L x W x H) Probe: 1.8m (cable length) |
| Frequency | 868.42 MHz (EU) |
| Certifications | Z-Wave Plus, CE [CE certified] |
Safety Instructions
Warning: Keep out of reach of children and animals. Do not expose the sensor to extreme temperatures or humidity. Do not attempt to disassemble or repair the sensor yourself. Use only the specified battery type. Dispose of used batteries according to local regulations.
Electrical Safety: Do not install the sensor near electrical outlets or appliances. Ensure proper wiring if connecting to a wired power source (though this model is battery-powered).
Water Safety: While designed for water detection, the sensor itself is not waterproof. Avoid submerging the main unit.
Warranty
FIBARO provides a 2-year limited warranty for the product from the date of purchase. The warranty covers defects in material or workmanship. For warranty claims, contact the authorized service center or the seller. The warranty does not cover damage caused by improper installation, misuse, accidents, natural disasters, or unauthorized repairs.
Warranty Claim Procedure: For warranty claims, contact the authorized service center or the seller. You can also find warranty claim forms and instructions on the FIBARO website: https://www.fibaro.com/support. After the claim is approved, the customer will receive the Return Merchandise Authorization (RMA) number. The customer is responsible for the shipping costs of the defective product to the authorized service center. If the defect is covered by the warranty, the customer will receive the repaired or replaced product at no additional cost. If the defect is not covered by the warranty, the customer will be charged for the repair costs.
Compliance
This device complies with the essential requirements and other relevant provisions of Directive 2014/53/EU.
CE Declaration of Conformity: FIBARO Group S.A. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
