Ecler PAGENETDN Technical Data Sheet
PAGENETDN
DIGITAL CONTROLS
EclerNet DANTE™/AES67 Paging Station & Control Touch-Screen
The PAGENETDN features a desktop console design with a gooseneck microphone and a 10" capacitive touch screen panel. It displays and manages User Control Panels for paging and controlling networked EclerNet devices, VEO video devices, and third-party devices.
PRODUCT OVERVIEW
PAGENETDN is a programmable Paging Station with dual audio output: DANTE™/AES67 (digital) and analogue (balanced). This allows its control features and microphone signal to be used for paging with any EclerNet digital matrix, regardless of whether it supports DANTE™/AES67 or not, such as MIO4040DN, MIMO88, MIMO88SG, and MIMO1212SG.
It shares control features with the WPNETTOUCH and can be programmed to control one or more networked EclerNet devices, or even a full installation combining various EclerNet devices like MIMO4040DN, MIMO88, MIMO88SG, MIMO1212SG digital matrices, NXA series digital audio managers, DUO-NET PLAYER units, etc. All programming is done through the EclerNet Manager application (*).
(*) Refer to the EclerNet Manager Application manual for more information. The EclerNet Manager application is available for download at www.ecler.com.
KEY FEATURES
- EclerNet control device, capable of executing EclerNet projects on its internal engine, acting as a server and/or client of UCP panels.
- 10" capacitive touch screen.
- Ethernet network connection.
- PoE or external power supply (multi-plug universal PSU included).
- VESA75 and desktop mounting systems included.
- Digital touchscreen embedded control panel with features similar to the WPNETTOUCH device: 10.1" IPS display (1280 x 800 pixels), Capacitive & multitouch touch panel.
- PoE DC supply compatible.
- External power supply compatible: external & universal PSU included + multi-plug AC set.
- Ethernet Base-Tx 10/100Mb interface.
- Flexo type gooseneck microphone included, with XLR connector and safety flap to prevent accidental microphone removal.
- Audio transport using DANTE™/AES67, 2 channels: DANTE™/AES67 channel #1 for microphone signal transmission, DANTE™/AES67 channel #2 for AUX input signal transmission.
- Phantom Power available for the MIC input.
- MIC out, analogue balanced signal, enabling PAGENETDN compatibility for paging with devices that do not natively support DANTE™/AES67, such as MIMO88, MIMO88SG, and MIMO1212SG.
- AUX input, stereo LINE, RCA connectors. The incoming signal is converted to mono and sent to the network via DANTE™/AES67 channel #2. This can be used to connect an external audio source (e.g., a media player) and inject its signal into the network in DANTE™/AES67 format.
- Paging features based on programmable UCP control panels.
- EclerNet control device, capable of executing EclerNet projects on its internal engine, acting as a server and/or client of UCP panels.
APPLICATIONS
- Commercial
- Hospitality
- Education
- Corporate
- Sports and wellness
TECHNICAL SPECIFICATIONS
MIC INPUT
| Microphone type | Removable gooseneck condenser microphone (eMCN1) |
| Polar pattern | Unidirectional |
| Microphone freq. response | 50Hz-18kHz (-10dB) |
| Phantom Voltage | 48VDC, ON/OFF by internal JUMPER |
| Output level with eMCN1 MICROPHONE | -5dBV @ 94dB SPL with ADJ MAX. -10dBV @ 94dB SPL with ADJ MID. -20dBV @ 94dB SPL with ADJ MIN. |
| HPF | 100Hz 12dB/oct ON/OFF by internal JUMPER |
LINE INPUT
| Connector | RCA |
| Signal | Line level, L + R |
| Nominal input level | -10dBV |
| Gain adjust | -20dBV/0dBV |
| Input impedance | >10kΩ |
DANTE™ AUDIO INTERFACE
| DANTE™/AES67 Network Tx channels | 2 (2 flows) |
| Latency | 1 / 2 / 5 ms (selectable) |
| Connector | RJ45 |
AUDIO OUTPUTS
| Microphone output signal Connector | Balanced, analog |
| Output level | Phoenix connector (symmetric) 0dBV |
System
| CPU | RK3128 quad core processor, clocked 1.6G |
| RAM | 1GB |
| ROM | 8GB |
Screen
| Size | 10.1" IPS |
| Resolution | 1280x800 |
| Contrast ratio | 1300 |
| Brightness | 300cd/m² |
| Screen scale / Display area | 16:9 / 218x135mm |
| Backlight | LED |
| Touch-panel | Capacitive multi-touch |
Network & Connectivity
| Ethernet | Supports PoE |
| Ethernet port | Ethernet Base-Tx 10/100Mb / 1GB CAT5e or better up to 100m. |
Power
| External power supply voltage | 12VDC |
| Maximum power consumption | 12W from 12V External Power Supply Voltage 15W from PoE PoE: class 0 802.3af Poe PD compliant |
General
| Mains Voltage | 100-240VAC + External PSU 12VDC |
| Dimensions (microphone excluded (WxHxD)) | 295x155x135 mm / 11.6"x6.1"x5.3" |
| Weight | 1.5 kg / 3.3 lbs |
| AC Power Adapter | 100-240VAC 47-63Hz 12V / 2A |
Accessories included
| AC power adapter | 100-240VAC 47-63Hz 12V / 1.5A, multiplug |
| Microphone | Ecler eMCN1 |
MECHANICAL DIAGRAM
A line drawing illustrating the Ecler PAGENETDN paging station, showing the gooseneck microphone, the touch screen display, and the base unit.
All product characteristics are subject to variation due to production tolerances.
NEEC AUDIO BARCELONA S.L. reserves the right to make changes or improvements in the design or manufacturing that may affect these product specifications.
For technical requests, address your supplier, distributor, or fill the contact form on the website at Support / Technical Request.
Motors, 166-168 08038 Barcelona - Spain - (+34) 932238403 | information@ecler.com | www.ecler.com
