AUTOPULSE 320-T3

Product Overview

The AUTOPULSE 320-T3 is a compact, inverter-based welding power source with 320 Amperes welding capacity. It features three integrated 4-roll wire feeders, compatible with standard, Push-Pull, and Spoolgun torch systems, making it suitable for welding sensitive materials such as aluminum. The machine includes 57 synergic programs for steel, stainless steel, MIG brazing, and aluminum alloys. These programs can be accessed via the "2-knob control unit" with a large color display, and operated in "Easy-Modus" by specifying just two parameters. The design emphasizes intuitive operation and reproducible process reliability.

A GYS AUTOPULSE 320-T3 welding machine, depicted as a mobile unit on wheels, featuring a torch and cable assembly. It is shown without optional accessories like the gas cylinder platform.

Optimized MIG/MAG Settings

• Welding processes: Standard, Pulse, Pulse-in-Pulse, and Manual.
• Torch trigger modes: 2T, 4T, SPOT, DELAY, and TACK.
• Precise weld cycle control: Run-in, Softstart, Hotstart, Upslope, Downslope, Crater filler, Post-gas flow, etc.

MIG/MAG Welding:

• Wire Steel Ø 0.8 / 1.0 mm
• Wire Stainless Steel Ø 0.8 / 1.0 mm
• Wire Aluminum Ø 0.8 / 1.0 / 1.2 mm

MIG Brazing Mode:

• Wire CuSi and CuAl Ø 0.8 / 1.0 mm

Simplified Welding

57 synergic welding programs ensure high-quality, reproducible welding results for a wide spectrum of materials, wire diameters, and shielding gases. The integrated, synergically programmed welding curves automatically provide optimized welding parameters, allowing the user to adjust wire speed, voltage, current, and inductance.

Maximum Performance

• Four microprocessors and a specialized hardware architecture drive internal signal processing speed to new dimensions. The very high control frequency enables an extremely stable arc, clean ignition, and efficient productivity under all conditions.
• Three electronically controlled 4-roll wire feeders for Ø 200mm spools are integrated.
• Automatic detection and switching of the wire feeder via button control.
• Torch and cable support for 3 welding torches & welding helmet.
• Push Pull (24V) and Spool Gun torch compatible (optional).

Ergonomic Control Panel

A close-up of the GYS AUTOPULSE 320-T3 control panel, displaying '10.3' and '15.0' on a large color screen, with two rotary knobs and four buttons for operation. It indicates three display modes: EASY, EXPERT, and EXTENDED.

• A simplified control panel designed according to user specifications.
• XL color display for precise setting and control of all relevant welding parameters.
• Two rotary knobs and four buttons for intuitive menu navigation.
• Machine software and welding programs can be updated via the integrated USB interface.
• Storage for up to 500 user-specific welding programs (Jobs) for repetitive welding tasks.

Robust and Mobile

• Reinforced IP 23 rated housing.
• Stable platform for holding two gas cylinders (2x4m³).

Optional Accessories

The machine supports optional accessories for enhanced functionality:

• Push Pull Torch: Model 046283, rated for 220 A (20% duty cycle), 4 meters long, 3 kg weight, suitable for wire diameters Ø 0.8 - 1.2 mm.
• Spool Gun Torch: Model 041486, rated for 150 A (60% duty cycle), 4 meters long, 3 kg weight, suitable for wire diameters Ø 0.6 - 1.0 mm.
• Consumables Box: Contains contact tips for MB15 / MB25 torches, rated for 250 A, Model 037458.

The control panel offers three display modes: EASY (simplified module), EXPERT (complete module), and EXTENDED (specific applications).

Technical Specifications