P1 GYS AUTO (PFC)
MIG/MAG INVERTER PULSE SINGLE-PHASE | 10 → 220 A
Model: 080584 (with accessories)
Product Overview
The P1 GYS AUTO is a 220 A single-phase synergic MIG/MAG welding unit specifically designed for car body specialists. It can weld all kinds of aluminum workpieces spatter-free. Fitted with a highly intuitive color interface, it can weld on a wide range of steel, aluminum and brazing alloys (CuSi3/CuAl8), even on thin 1.0 mm & 1.2 mm material, using a dedicated pulse mode.
MIG/MAG Welding
- MIG/MAG Smooth + Pulse:
- Steel and stainless steel wire: Ø 0.6 to 1.2 mm
- Aluminum wire: Ø 0.8 to 1.2 mm
- CuSi and CuAl wire: 0.8 and 1.0 mm dia.
Intelligent Features
- Specific synergies: Steel, AlMg, AlSi, CrNi, CuSi
- After entering 3 pieces of data: Wire diameter, material/gas and thickness of material being welded, the product automatically determines the optimum welding conditions.
- PFC technology: Equipped with PFC (Power Factor Correction), it adjusts to all input voltages from 185 to 265V.
- New, intuitive, multilingual 3.5" HMI.
- Full machine and synergy updates via USB stick.
- Job memory for up to 200 welding programs for recurring tasks.
- Portability function: user JOBS and machine configuration can be loaded/saved/transported via USB stick.
- On-demand ventilation system to reduce dust ingress.
Premium Welding
- Digital arc control with rapid ignition.
- High arc stability to reduce spatter.
- 4-roller wire feeder with digital encoder for flawless wire feed.
- 4 MIG-MAG welding modes: Dynamic Standard, Pulse, ModulArc, Manual.
2 Display Modes
- Easy: A simplified interface adapted to the vast majority of users for optimum soldering quality.
- Expert: Dedicated interface for the experienced welder with the ability to adjust all welding cycle parameters.
- Welding mode:
- 2T: Welding takes place with trigger held down. It stops when the trigger is released.
- 4T: Welding takes place with trigger released, continuous welding. To stop welding, press and release the trigger again.
Ergonomic Features
- Reinforced wheels for stability and maneuverability.
- Gas cylinder support up to 4 m³ (20 L).
- IP23S rated to withstand difficult environments.
- Storage compartment.
Accessories (Optional)
Supplied with 1 torch:
- Aluminum wire guide: 3 m Ø 1.0 + 1.2 mm
- Fixed earth clamp (3.5 m)
- 2 type B aluminum rollers: Ø 1.0/1.2
Consumables Kit (MB25 torch):
- Steel: 250 A Ø 0.8 mm - M6 (Part No. 072145)
- Aluminum wire guide: 3 m (Part No. 072145)
Type B rollers:
- Steel / Inox: Ø 0.6/0.8 (Part No. 042353), Ø 0.8/1.0 (Part No. 042360), Ø 1.0/1.2 (Part No. 046849)
- Aluminum: Ø 0.8/1.0 (Part No. 042377), Ø 1.0/1.2 (Part No. 040915 Original rollers)
Technical Specifications
| Parameter | Value |
|---|---|
| Input Voltage | 230 V, 1~, 50/60 Hz |
| Input Current | 16 A |
| Wire Feed Speed | 1-20 m/min |
| Welding Current Range | 10-220 A |
| Duty Cycle (100%) | 130 A |
| Duty Cycle (60%) | 150 A |
| Power Factor Correction | PFC (185V to 265V input) |
| Protection Class | IP23S |
| Dimensions (L x W x H) | 75 x 45 x 80 cm |
| Weight | 48 kg |
| Compliance | CE - EN 60974-1 |
Operation and Interface
Simple operation, even when wearing welding gloves.
Choose the main parameter to be displayed on the screen (wire speed, current, etc.).
Easy access to the most common welding parameters.
