How to Assemble

1. Insert handle into upper handle pole. (Depiction: A handle being inserted downwards into the top of an upright pole.)
2. Insert the upper handle pole into the base. (Depiction: The upper handle pole being inserted downwards into the main body/base of the carpet cleaner.)
3. Slide the Clean Water Tank securely into place on the back of the unit. (Depiction: A water tank sliding downwards into a slot on the back of the unit.)
4. Align the hooks on the nozzle cover to the arrows on the unit and rock cover into place. (Depiction: A nozzle cover with hooks being aligned and pressed onto the front of the unit, showing arrows for alignment.)

How to Use

1. Remove Clean Water Tank, twist off water cap and add warm water to the fill line. (Depiction: A water tank being removed, with an arrow indicating twisting off the cap and filling.)
2. Add Hoover® cleaning solution to the solution fill line then replace and tighten the cap. (Depiction: A bottle of cleaning solution being poured into the water tank, showing a fill line.)
3. Slide the Clean Water Tank back into the unit. (Depiction: The water tank sliding back into its position on the unit.)
4. Plug power cord into electric outlet. Step on the Handle Release Pedal to recline the unit into the cleaning position. (Depiction: A power cord being plugged into an outlet, and a foot pressing a pedal to recline the unit.)
5. Step on the ON/OFF Pedal to turn ON. (Depiction: A foot pressing a pedal on the unit marked with an ON/OFF symbol.)
6. Slowly push forward then backwards while squeezing the trigger to apply water and cleaning solution. (Depiction: A person operating the carpet cleaner, pushing it forward and backward, with a hand squeezing a trigger on the handle.)
7. Release trigger then slowly push forward then backwards to remove water and dry the carpet. (Depiction: A person operating the carpet cleaner, pushing it forward and backward, with a hand releasing the trigger.)