Hoover PowerDash Pet Carpet Washer

How to Use

1. Remove the Clean Water Tank, twist off the water cap, and add warm water to the fill line.
2. Add Hoover cleaning solution to the Solution Fill Line, then replace and tighten the cap.
3. Slide the Clean Water Tank back into the unit.
4. Plug the power cord into an electrical outlet. Step on the Handle Release Pedal to recline the unit into the cleaning position.
5. Step on the ON/OFF Pedal to turn the unit ON.
6. Slowly push forward and backward while squeezing the trigger to apply water and cleaning solution.
7. Release the trigger and slowly push forward and backward to remove water and dry the carpet.

Easy Cleanup and Maintenance: After Each Use

1. Remove the tank lid to empty and rinse the tank.
2. Remove the Nozzle Cover and rinse.
3. Flip the brushroll window forward to remove any debris from the brushroll.

Allow parts to air dry before storing.

Pro Tip: For best experience, vacuum carpet thoroughly with a Hoover vacuum before use. Do not use the carpet cleaner as a traditional vacuum cleaner.