Outsunny Garden Swing - Assembly & Instruction Manual
Model: 84A-054V01
Document ID: INbib028V05_US_CA
Important Information
Keep this information for future consultation. Read carefully.
For Domestic Use Only
Usage Tips
- Place the swing stably on a flat floor.
- Mount the swing arm in a sheltered location away from weather.
- Stay away from open flames.
- Do not hang anything on the structure.
- Avoid overloading the anchors.
- It is advised not to stay on the swing during a storm.
- It is recommended to protect the swing from strong wind or rain when you are absent.
Precautions Before Assembly
- Prepare a clean and dry mounting area.
- Verify that the product is not damaged.
- Check that none of the pieces are missing.
Maintenance
- Clean with a soft fabric.
- Regularly remove leaves and/or water collected on the canvas.
- Check the anchors regularly.
Storage Conditions
- The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.
Assembly Caution
Caution with the risks of pinching or cuts during assembly.
The manufacturer declines all responsibility in case of damages due to bad installation or weather.
Parts List
The following parts are included in the package:
Part ID | Description | Quantity |
---|---|---|
A | Frame Leg | x2 |
B | Frame Leg | x2 |
C | Top Bar | x1 |
D | Side Support Bar | x1 |
E | Seat Support Bar | x2 |
E1 | Seat Support Bar | x4 |
F | Seat Frame | x1 |
G | Seat Frame | x1 |
H | Spring | x2 |
I | Armrest Frame | x2 |
J | Seat Canvas | x1 |
M | Canopy | x1 |
O | Canopy Support Clip | x2 |
P | Screw M6*46 | x2 |
Q | Screw M6*30 | x1 |
R | Screw M8*35 | x2 |
S | Screw M6*48 | x4 |
T | Screw M8*60 | x2 |
U | Screw M8*63 | x2 |
V | Screw M6*68 | x4 |
W | Screw M6*86 | x4 |
X | Nut M8 | x6 |
X | Nut M6 | x15 |
Y | Washer M8 | x6 |
Y | Washer M6 | x15 |
Z | Nut M8 | x6 |
Z | Nut M6 | x15 |
AA | Allen Wrench | x2 |
AB | Wrench | x1 |
Assembly Instructions
Step 01
Attach part D (Side Support Bar) to part C (Top Bar) using screws P (M6*46) x2, nuts X (M6) x2, washers Y (M6) x2, and nuts Z (M6) x2. (Refer to diagram 01)
Step 02
Attach parts A and B (Frame Legs) to the assembly from Step 01 using screws W (M6*86) x4, nuts X (M6) x4, washers Y (M6) x4, and nuts Z (M6) x4. (Refer to diagram 02)
Step 03
Attach parts E (Seat Support Bars) to the frame using screws S (M6*48) x4, nuts X (M6) x4, washers Y (M6) x4, and nuts Z (M6) x4. (Refer to diagram 03)
Step 04
Attach part F (Seat Frame) to part G (Seat Frame) using screw Q (M6*30) x1, nut X (M6) x1, and washer Y (M6) x1. (Refer to diagram 04)
Step 05
Attach the seat assembly (F+G) to the main frame using screws V (M6*68) x4, nuts X (M6) x4, washers Y (M6) x4, and nuts Z (M6) x4. (Refer to diagram 05)
Step 06
Attach armrest frames I to the seat frame using screws T (M8*60) x2, nuts X (M8) x2, washers Y (M8) x2, and nuts Z (M8) x2. (Refer to diagram 06)
Step 07
Attach seat canvas J to the seat frame using screws R (M8*35) x2 and U (M8*63) x2, along with nuts X (M8) x4, washers Y (M8) x4, and nuts Z (M8) x4. (Refer to diagram 07)
Step 08
Install springs H (x2) between the seat frame and the top bar. (Refer to diagram 08)
Step 09
Attach the canopy M to the top bar using canopy support clips O (x2). (Refer to diagram 09)
Assembly is now complete. (Refer to diagram 10 - 'Done')
Contact Information
For customer support, please contact Aosom in your region:
United States (US)
Phone: 001-877-644-9366
Email: customerservice@aosom.com
Canada (CA)
Phone: 001-855-537-6088
Email: customerservice@aosom.ca
United Kingdom (UK)
Phone: 0044-800-240-4004
Email: enquiries@mhstar.co.uk
Germany (DE)
Phone: 0049-(0)40-88307530
Email: service@aosom.de
France (FR)
Phone: 0033-1-84166106
Email: contact@aosom.fr
Spain (ES)
Phone: 0034-931294512
Email: atencioncliente@aosom.es
Italy (IT)
Phone: 0039-0249471447
Email: clienti@aosom.it