Outsunny 3-Seater Patio Swing Chair

Important Information

IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY.

This product is only for domestic use.

Usage Tips

• Put the chair stably on a flat floor.
• Mount the garden chairs in the shelter of the weather.
• Stay away from open flames.
• Don't hang anything in the structure.
• Avoid overloading the anchors/structure.
• It is advised not to stay on the chairs when there is a storm.
• Do not use in adverse weather conditions and cover furniture when not in use.

Precautions Before Assembly

• Prepare a clean and dry mounting area.
• Verify that the product is not damaged.
• Check that none of the pieces are missing.

Maintenance

• Clean with a soft fabric.
• Regularly remove leaves and/or water collected on the canvas.
• Check the chair regularly.
• Do not use this product if the seat cloths, cloth cushion or tarpaulins are ageing, and contact customer service.

Storage Conditions

• The fabric should be stored completely dry, in a clean and dry place to avoid the risks of mold.

Assembly Instructions

Parts List

• Part A: x2
• Part B: x2
• Part C: x1
• Part D: x1
• Part F1: x1
• Part G1: x1
• Part H: x2
• Part I: x2
• Part J: x1
• Part K: x1
• Part L: x2
• Part M: x1
• Part N: x2
• Part O: x2
• Part P: x4
• Part Q: x4
• Part R: x6
• Part S: x2
• Part T: x4
• Part U: x4
• Part Y: x2
• Part AA: x1
• Part BB: x1
• Part Z: x1

Hardware

• M6x30: x2
• M6x60: x1
• M6x80: x1
• M8x105: x1
• M8x60: x2
• M8x45: x4
• M6x14: x1
• M8x12: x1
• M6x52: x4

Assembly Steps

1. Step 01: Connect part C (Top Bar) to part D (Top Bar Connector) using two part A pieces and two part N fasteners.
2. Step 02: Attach the side frame components. Connect part F (Side Leg Frame) to the structure from Step 01 using part B and fasteners Q, R, S, T, U. Repeat for the other side with part G (Side Leg Frame).
3. Step 03: Connect the main seat support frame. Attach part J (Seat Support Bar) to the side frames using parts O, P, and M fasteners.
4. Step 04: Attach the back support. Connect part L (Backrest Support Arm) to the main frame using parts Y and Z fasteners.
5. Step 05: Attach the seat and back cushions. The diagram shows cushions being secured with fasteners.
6. Step 06: Final tightening of all fasteners.
7. Step 07: Attach the canopy support structure (part K) and the canopy itself.
8. Step 08: The assembly is now complete.

Contact Information

Importer Information

US: Imported by Aosom LLC, 27150 SW Kinsman Rd Wilsonville, OR 97070 USA. MADE IN CHINA.

CA: Imported by Aosom Canada Inc., 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9. MADE IN CHINA.

UK: IMPORTER ADDRESS: MH STAR UK LTD, Unit 27, Perivale Park, Horsenden lane South Perivale, UB6 7RH. MADE IN CHINA.

FR: ADRESSE D'IMPORTATION: MH FRANCE, 2 Rue Maurice Hartmann, 92130 Issy Les Moulineaux, France. FABRIQUÉ EN CHINE. [Recycle symbol] Think about recycling.

ES: IMPORTADOR: SPANISH AOSOM, S.L., C/ROC GROS,N°15.08550, ELS HOSTALETS DE BALENYÀ, SPAIN. B66295775. WWW.AOSOM.ES. ATENCIONCLIENTE@AOSOM.ES. TEL: 931294512. HECHO EN CHINA.

PT: SPANISH AOSOM, S.L, C.ROC GROS N.15, 08550. ELS HOSTALETS DE BALENYÀ. TEL: 931294512 (SEG-SEX DAS 7:30H ÀS 16:30H). INFO@AOSOM.PT. WWW.AOSOM.PT.

DE: ADRESSE DES IMPORTEURE: MH Handel GmbH, Wendenstraße 309, D-20537 Hamburg, Germany. IN CHINA HERGESTELLT.

IT: IMPORTATO DA: AOSOM Italy srl, Centro Direzionale Milanofiori, Strada 1 Palazzo F1, 20057 Assago (MI). P.I.: 08567220960. FATTO IN CINA.