Elitech LogEt 5i User Manual

Single-Use IoT Data Logger

Product Presentation

The Elitech single-use IoT data logger LogEt 5i integrates multiple factors monitoring, including temperature, humidity, light, shock, and 4G networking, to provide a comprehensive environmental data solution. The device is equipped with world-famous high-precision sensors, capable of collecting and monitoring temperature and humidity data in various environments. Rapid start can be set via physical button, platforms, or timer, ensuring the efficiency and quality of logistics. The LogEt 5i inherits the advantages of traditional temperature and humidity data loggers while innovating and upgrading its functions, offering a comprehensive and convenient environment data monitoring solution.

Device Components:

① Backmounted hanging hole
② Liquid crystal display
③ LED pilot lamp
④ Start-stop button
⑤ Serial number
⑥ Light sensor
⑦ Power supply + data interface
⑧ Built-in sensor
⑨ Activation / Flight mode button
⑩ External sensor

LCD Display Indicators:

① Operative mode
② Function declaration
③ Airplane mode
④ Signal condition
⑤ Battery capacity
⑥ Light and vibration alarm signs
⑦ Time and the number of record notes
⑧ Temperature and humidity value

Note: To ensure data reliability, do not open the record if the battery power is less than 10% to 20%.

Selection Table (Standard Light and Vibration Sensors)

Model	Probe Type	Measuring Range	Accuracy
LogEt 5i T	Built-in temperature	-30°C~70°C	±0.5°C
LogEt 5i TH	Built-in temperature & humidity	-30°C~70°C 0%RH~100%RH	±0.5°C ±5%RH
LogEt 5i TLE	External temperature & built-in temperature	Outlay: -200°C~150°C Built-in: -30°C~70°C	±0.5°C (-40°C~85°C) ±1°C (-100°C~150°C) ±2°C (others)

Technical Parameters

Shock range: 0g~16g
Light intensity range: 0~52000Lux
Resolution ratio: 0.1°C/0.1%RH/0.1g/1Lux
Button: Double button design
LED light: Red and green, red and blue LED indicator lights
Display screen: Broken code display
Location mode: LBS + GPS (optional)
Memory point: 32000
Shadow data: Prestant +Afterstop
Interrecord gap: 1min~24h; default: 5min
Upload interval: 5min~24h; default: 60min
Data upload method: 4G+2G
Mode of starting freight: Button pressing, platform, and timing
Freight stop mode: Button, platform, and fill up
Repeat the start: 3 times (not off shelf life)
Airplane mode: Key button, timing, electronic fence
Alarm mode: Overlimit, low power
Battery type: 3.0V disposable lithium manganese battery 4800 mAh
OTA upgrade: Upgrade is available through the data management software and the platform
Classification of waterproof: IP65 (built-in)
Work environment: -30°C~70°C, 0% RH ~ 100% RH (no condensation)
Storage environment: 15~30°C, 20~75%RH
Specification and dimension: 103 x 61.3 x 30 (mm)

Operating Instructions

1. Add Equipment

Log on to the platform website: http://new.i-elitech.com, or scan the QR code to download and install the APP. Register, sign in, and add devices as prompted.

[QR code for Android APP] [QR code for iOS APP]

2. Activation

Long press the button for 5 seconds, and the screen appears normally, indicating that the device is activated. [✔️] indicates successful activation.

Note: Clicking the button screen to display normally also indicates activation.

3. Airplane Mode

Open: Long press the button for 5 seconds. The screen displays a [✈️] logo, indicating that the flight mode is successfully started.

Close: Long press the button for 5 seconds. The screen displays a [?✈️] sign, indicating that the flight mode is closed.

Note: For other flight modes, please operate through the platform or APP.

4. Start the Record

Press the [START/STOP] button for 5 seconds. The screen displays a [▶️] sign, indicating the startup record. If the sign is flashing, the delay countdown state is entered. After the delay, the record starts automatically.

5. Stop Recording

Long press the [START/STOP] button for 5 seconds. The screen displays a [■] sign, indicating that recording has stopped successfully.

6. Data Export

The device connects to a computer via USB interface using the data cable, automatically generating data reports in PDF + CSV format. You can copy the generated report to your computer for saving.

[Screen showing 'Report generation'] [Screen showing 'Device is connected to the computer']

Operating Instructions for Freight Management

After logging in to the platform or APP, click the 'Freight Management' menu of the main menu.
Click the "Configure" menu on the home page to create and add "user management", "Carrier", "location", "alarm preset", and "freight template" successively.
Click the "Freight Management" menu on the home page to create and manage the freight transport.

Note: For detailed operation manuals, see the operation instructions in the platform or APP.

The LED Indicator Light Instructions

Device Status/Operation	LED Indicator Display	Triggering Method
Malfunction/Low Battery (below 5%)	No Flashing	Short Press Button
No Calibration	Green & Red Flashing x 2	Short Press Button
No Activation	Red & Red Flashing x 2	Short Press Button
No Start	Green & Red Flashing x 1	Short Press Button
Start Recording	Green Flashing x 5	Short Press Button x 5s
Delayed/Scheduled Start	Green to Red Flashing x 1	Short Press Button x 10s or Auto Flashing
Recording	Green Flashing x 1 (OK)	[No specific trigger method listed, implies automatic]
Stop Recording	Red Flashing x 1 (Alarming)	Long Press Right Button x 5s
Recording Stopped	Green Flashing x 2 (OK)	Short Press Button
Report Generating	Red Flashing x 2 (Alarming)	[No specific trigger method listed]
USB Connecting	Green to Red Flashing x 1	Connect USB
Clear Report Label	Green & Red On	Long Press Left Button x 5s
Communication Normal	Green & Red Flashing	Flashing When Connecting to Network
Communication Error	Blue Flashing x 3	Flashing When Connecting to Network
Start Airplane Mode	Red & Blue Flashing x 3	Long Press Left Button x 5s
Stop Airplane Mode	Blue Flashing x 5	Long Press Left Button x 5s
Clear the report logo	At the same time flashing	Long Press Left Button x 5s (USB connected)

LCD Explicit Declaration

Log: Number of points recorded (Display shows a number, e.g., 1888)
Log: Number of points not uploaded (Display shows a number, e.g., 10008)
Lo-Po: Low power (Display shows "Lo-Po")
FULL: The number of uses has been used (Display shows "FULL")
UP-Ld: Data not uploaded, probe fault (Display shows "UP-Ld")
Data not uploaded, probe fault (Display shows a symbol like X ▶️ followed by dashes and E)

Safety Instructions

Battery

Please use the original battery rather than any other ones to avoid possible damage or error to the device.
Do not disassemble the battery without permission. No squeezing, hitting, heating, or burning the battery, otherwise, the battery may explode and lead to a fire.

Device

This device is prohibited from being used in environments with flammable or explosive gas, otherwise, an explosion/fire may be caused.
If peculiar smell emits from the device during use, please cut off power supply immediately and contact the manufacturer or supplier.

Precautions

If the device will not be in use for a long period of time, it should be removed and stored in the package box in a dry and cool environment.
Any unauthorized change to the device by the user is not allowed, which may affect accuracy or even damage the device.
Do not use the device outdoors to avoid short circuits, burns, and other malfunctions caused by bad weather such as raining and thunder-lightings.
If the data logger is offline (no data uploading) for a long period of time, please check its networking status.
Use the data logger within its measurement range.
Do not impact the data logger with force.

Factors Affecting Measurement Values:

Temperature deviation: Stabilizing time too short for placing the device in the measurement environment. Near or even exposed to a heat/cold source.
Humidity deviation: Stabilizing time too short for placing the device in the measurement environment. Long time exposed in steam, fog, waterfall, or condensation environment.
Pollution: Exposed to dust or other polluted environment.

Document Version: V1.2

	Elitech RCW-5i Single-Use IoT Data Logger User Manual User manual for the Elitech RCW-5i single-use IoT data logger, detailing its product presentation, technical specifications, selection table, operation instructions, data export, LED indicator meanings, LCD display declarations, and safety precautions.
	Elitech RCW-400A User Manual: Temperature and Humidity Data Logger Comprehensive user manual for the Elitech RCW-400A 4-channel temperature and humidity data logger. Covers features, specifications, operation, sensor installation, and Elitech cloud/app integration for remote monitoring.
	Elitech LogEt 1 Series User Manual: Temperature and Humidity Data Loggers Comprehensive user manual for the Elitech LogEt 1 series of single-use data loggers, covering LogEt 1 (temperature), LogEt 1TH (temperature-humidity), and LogEt 1 Bio (high accuracy temperature). Includes specifications, operation, status indication, and warnings.
	Elitech LogEt 8 Series Data Logger User Manual - Temperature and Humidity Monitoring Comprehensive user manual for the Elitech LogEt 8 Series data loggers, detailing specifications, operation, installation, and troubleshooting for temperature and humidity monitoring in cold chain logistics.
	Elitech RCW-800W Wi-Fi IoT Temperature and Humidity Data Logger User Manual Comprehensive guide to the Elitech RCW-800W Wi-Fi IoT data logger, covering features, specifications, operation, and app configuration for real-time temperature and humidity monitoring.
	Elitech IoT & Cold Chain Data Loggers \| Comprehensive Product Catalog Explore Elitech's extensive range of IoT and cold chain data loggers, including temperature, humidity, and multi-use devices. Discover features, technical specifications, and software solutions for reliable monitoring and compliance.
	Elitech RCW-400A User Manual: Temperature and Humidity Data Logger Comprehensive user manual for the Elitech RCW-400A, a 4-channel temperature and humidity data logger with GSM and cloud connectivity. Learn about features, specifications, installation, and operation.
	Elitech RC-61/GSP-6 Temperature and Humidity Data Logger User Manual Comprehensive user manual for the Elitech RC-61/GSP-6 temperature and humidity data logger. Learn about its features, specifications, operation, status indications, battery replacement, and default parameters.