Assembly Instructions

STEP 1

Hardware Used: A (2PCS), C (∅8*30, 4PCS), H (3*14, 6PCS), M (1PC), N (1PC), T (1PC)

Attach part 4 and part 5 using hardware M, N, H, C, and A as shown in the diagram. Ensure correct orientation and alignment.

STEP 2

Hardware Used: A (2PCS), B (2PCS), C (∅8*30, 1PC), H (3*14, 2PCS), L (1PC), T (1PC)

Connect part 8 to part 4 and part 5 using hardware B, H, L, A, and C. The diagram shows the placement of the cam locks (B) and screws (H, A).

STEP 3

Hardware Used: A (2PCS), B (4PCS), C (∅8*30, 1PC), T (1PC)

Attach part 6 to part 3 and part 5 using hardware B, C, and A. The diagram illustrates the connection points and the use of cam locks (B).

STEP 4

Hardware Used: C (∅8*30, 2PCS), D (M6*30, 6PCS), G (7*40, 2PCS), U (1PC)

Attach part 10 to part 5 using hardware C, D, and G. The diagram shows the insertion of screws (D, G) and cam locks (C) into the designated holes.

STEP 5

Hardware Used: D (M6*30, 12PCS), E (M6*50, 4PCS), U (1PC)

Connect parts 9 to the main structure (parts 4, 5, 6, 11) using hardware D and E. The diagram shows the placement of screws (D, E) for reinforcing the frame.

STEP 6

Slide part 7 into its designated slot within the assembled frame. The diagram shows the direction of insertion with an arrow.

STEP 7

Hardware Used: E (M6*50, 4PCS), I (4*14, 2PCS), T (1PC), U (1PC)

Attach part 18 (drawer slides) to parts 9 and 2 using hardware E and I. The diagram shows the correct orientation and screw placement for the drawer slides.

STEP 8

Hardware Used: A (2PCS), C (∅8*30, 2PCS), T (1PC)

Attach part 1 to the top of the assembled structure using hardware A and C. The diagram shows the alignment and insertion of screws (A) and cam locks (C).

STEP 9

Hardware Used: B (2PCS), D (M6*30, 10PCS), T (1PC), U (1PC)

Attach part 5 to the top assembly (part 1) using hardware B and D. The diagram shows the cam lock (B) and screw (D) connections.

STEP 10

Hardware Used: A (4PCS), B (4PCS), F (M4*18, 4PCS), J (1PC), S (4*40, 4PCS), T (1PC)

Assemble the drawer components (parts 13, 14, 15, 16, 17) using hardware A, B, F, J, and S. The diagram shows the attachment of drawer slides (part 11, not explicitly listed here but implied by context), drawer front (part 13), and handle (part J).

STEP 11

Hardware Used: H (3*14, 6PCS), O (1PC), P (1PC), T (1PC)

Attach drawer slides (parts O and P) to the drawer and the main unit using hardware H. The diagram shows the precise placement of screws (H) for the slides.

STEP 12

Hardware Used: F (M4*18, 2PCS), H (3*14, 2PCS), K (1PC), L (1PC), Q (2PCS), T (1PC)

Attach the barn door (part 12) using hardware F, H, K, L, and Q. The diagram shows the attachment of the handle (K) and hinges/connectors (L, Q).

STEP 13

Install the assembled barn door (part 12) and insert the drawer. The diagram shows the door being attached and the drawer sliding into place. It also indicates connections for power/cables.

STEP 14

Hardware Used: R (∅21, 4PCS)

Attach decorative caps or feet (part R) to the bottom of the unit. The diagram shows the placement of these caps.