Scosche FD1436B/FD1436BLKB Installation Kit

Introduction

This premium installation kit from Scosche is designed to help you mount your car stereo or CD player into the dash of your 2008 Ford Escape and Mazda Tribute vehicles. It includes all necessary parts for a professional installation.

Important Safety Precautions

CAUTION: Always disconnect your vehicle's negative battery terminal before beginning installation to prevent electrical damage. Use a volt/ohm meter for wiring checks, as test lights or grounded probes can damage vehicle computer systems. Avoid contact with factory airbag wiring, as accidental deployment can cause serious injury or death.

Notes:

• Refer to your vehicle's specific instructions for any special tools required.
• Consult your car stereo's manual for proper wiring and mounting procedures.

Installation Overview

Factory Stereo Removal

Instructions are provided for removing the factory stereo from 2008 Ford Escape and Mazda Tribute models, including steps for panel removal and unscrewing components.

Mounting the Stereo

Detailed steps guide the attachment of both Single DIN and Double DIN aftermarket stereos using the provided brackets and hardware. This includes securing the pocket, mounting the stereo to brackets, and attaching the assembly to the vehicle's dash.

Note: Rear support straps are available separately and recommended for structural integrity.

Wiring Information

For factory wiring codes and easy connection of your car stereo to the factory wiring harness, visit www.scosche-cars.com. Connectors like FD23B (Ford) and CRAB (Chrysler/Jeep) are mentioned.

Liability Disclaimer

Scosche Industries, Inc. provides this booklet based on documented research but is not responsible for inconsistencies due to vehicle manufacturing changes or damage incurred during installation.

For further questions, contact Scosche Industries technical support at 1-800-621-3695 ext. 3.