ANKER PowerPort mini User Manual

Using Your Product

For the fastest and safest charge, use an Anker® cable, your device's original cable, or another certified cable (such as MFi).

Diagram Description: The device features two USB-A ports, labeled '1' and '2'.

Attention

• The product is designed for use with IT equipment only.
• The maximum ambient temperature during use of the appliance must not exceed 35°C.
• Naked flame sources, such as candles, must not be placed on the product.
• Disconnection from line voltage is made by AC plug.
• In case of broken cords or plugs, the product must be disposed of.
• If you want to clean the product, only use a dry cloth or brush.
• The socket-outlet shall be installed near the equipment and shall be easily accessible.
• The power supply is not intended to be repaired by service personnel in case of failure or component defect; the product can be disposed of.

Specifications

Input: 100-240 V~0.5 A 50-60 Hz

USB Output: 5.0 V 2.4 A 12.0 W (2.4 A Max Per Port)

Average active efficiency: 83.4%

Efficiency at low load (10%): 81.6%

No-load power consumption: 0.066 W

Customer Service

For FAQs and more information, please visit: anker.com/support

Contact Information:

• US: +1 (800)988 7973 (Mon-Fri 6:15 - 17:00 PT)
• UK: +44 (0) 1604 936200 (Mon-Fri 6:00-17:00; Sat-Sun 6:00-14:00)
• DE: +49 (0) 69 9579 7960 (Mo-Fr 6:00 - 11:00)
• China: +86 4000550036 (Mon-Fri 9:00 - 18:00)
• Japan: 03 44557823 (Mon-Fri 9:00 - 17:00)
• Email: support@anker.com

Lifetime technical support is available.

Warranty

18-month limited warranty*

*Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.

Compliance Information

FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help.

Importer (for FCC matters only): Fantasia Trading LLC, 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764, USA. Telephone: +1-800-988-7973

Industry Canada Statement: This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

Declaration of Conformity (EU): Hereby, Anker Innovations Limited declares that the product type A2620 is in compliance with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/EC. The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com

Declaration of Conformity (GB): Hereby, Anker Innovations Limited declares that the product type A2620 is in compliance with Electrical Equipment (Safety) Regulations 2016 & Electromagnetic Compatibility Regulations 2016 & The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 & The Ecodesign for Energy-Related Products Regulations 2010. The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com

Safety Information: The product is intended for use in dry, indoor locations only. It should not be exposed to moisture or extreme temperatures. Keep away from open flames and direct sunlight. Ensure the socket-outlet is easily accessible. For safety, the power supply is not intended to be repaired by service personnel; it should be disposed of if faulty.