Using Your Product
For the fastest and safest charge, use an Anker cable, your device's original cable, or another certified cable (such as MFi).
To connect your device:
- Plug the Anker PowerPort Atom PD 2 into a wall outlet.
- Connect your device to one of the USB-C ports on the charger using a compatible USB-C cable.
- For dual-port charging, connect a second device to the other USB-C port.
Visual description: A diagram shows the PowerPort Atom PD 2 with two USB-C ports. An arrow points from the charger to a wall outlet, indicating power input. Two additional arrows point from each USB-C port to a generic device, illustrating the connection for charging.
Important Attention and Safety Information
- The product is designed for use with IT equipment only.
- The maximum ambient temperature during use of the appliance must not exceed 25°C.
- Naked flame sources, such as candles, must not be placed on the product.
- Disconnection from line voltage is made by the appliance coupler.
- In case of broken cords or plugs, the product must be disposed of.
- To clean the product, use only a dry cloth or brush.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel in case of failure or component defect; the product can be disposed of.
FCC and IC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
The responsible party for FCC matters is Fantasia Trading LLC, located at 9155 Archibald Avenue, Suite 202, Rancho Cucamonga, CA, 91730, US. Telephone: +1 (909) 484-1530.
Specifications
| Feature | Detail |
|---|---|
| Input | 100-240V ~ 1.7A 50-60Hz |
| Output (Single Port) | 5V-3A / 9V-3A / 15V-3A / 20V-3A (Max Per Port) |
| Output (Both Ports Simultaneously) | 5V-3A / 9V-3A / 15V-2A / 20V-1.5A (Max Per Port) |
| Size | 68 X 69 X 28 mm / 2.7 x 2.7 x 1.1 in |
| Weight | 178 g / 6.3 oz |
This product is safe for use only at altitudes below 2000m.
This product is safe for use only in non-tropical regions.
Customer Service and Warranty
Anker provides an 18-month limited warranty for the PowerPort Atom PD 2.
Lifetime technical support is also available.
For FAQs and more information, visit: anker.com/support
Contact Anker Support:
- US: +1 (800) 988 7973 (Mon - Fri 9:00am - 5:00pm PT)
- UK: +44 (0) 1604 936200 (Mon - Fri 6:00 - 11:00 GMT)
- DE: +49 (0) 69 9579 7960 (Mo - Fr 6:00 - 11:00)
- JP: +810344557823 (月-金 9:00-17:00)
- CN: +864000550036 (周一至周五9:00-17:30)
Note that consumer rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.
Declaration of Conformity
Anker Innovations Limited declares that product type A2029 is in compliance with Directives 2014/35/EU, 2014/30/EU, 2011/65/EU, and 2009/125/EC. The full text of the EU declaration of conformity is available at: https://www.anker.com
Anker Innovations Limited is located at Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong.
