POLVCDG X7 Bone Conduction Swimming Headphones
User Product Guide
Product Specifications
Product Model: X7
Waterproof Level: IPX8
Wireless Version: V5.3
Transmission Distance: ≤10m
Music Format Support: MP3, WMA, WAV, APE, FLAC
Battery: 200mAh
Charging Time: About 2 hours
Playback Time: 10H @ 65% volume
Protocol: HFP, A2DP, AVRCP
Key Features and Controls
Multiple Use Key: The headphones feature a power switch and volume control buttons.
- Power Button: Used for power on/off, answering/ending calls, play/pause music, and switching modes.
- Volume + Button: Increases volume, and can be long-pressed for the previous song.
- Volume - Button: Decreases volume, and can be long-pressed for the next song.
- Microphone: Integrated for calls.
Pairing/Pilot Lamp: Indicator lights show device status (e.g., red/blue flashing for pairing, blue for connected, red for charging, solid blue for fully charged).
AI Intelligent Voice Control: Requires mobile phone support for voice wake-up. Activate by long-pressing the power button for 1 second when Bluetooth is connected. Allows voice control for tasks like checking time, weather, making calls, or playing music.
Dual Mode Switching: Easily switch between Bluetooth and MP3 (TF card) modes by double-clicking the power button.
Operating Instructions
Power On: Press and hold the power button for 3 seconds until the blue indicator light turns on.
Power Off: Press and hold the power button for 3 seconds. The red light turns off.
Bluetooth / MP3 Mode: Double-click the power button.
Answering an Incoming Call: Press the power button.
Ending a Call: Press the power button.
Volume Increase: Press the "Volume +" button.
Volume Down: Press the "Volume -" button.
Previous Song: Long-press the "Volume +" button for two seconds.
Next Song: Long-press the "Volume -" button for two seconds.
Music Playback: Press the power button.
Music Pause: Press the power button.
Switching Handset During Call: Hold down the power button for 2 seconds.
Pairing and Connectivity
Entering Pairing State: When powered on, the device automatically enters pairing mode, indicated by alternating red and blue flashing lights.
Pairing: Once in pairing state, enable Bluetooth on your device (phone/computer) and search for the device name "X7". Select "X7" to connect and pair. A successful connection is indicated.
Bluetooth Music Playback: Indicated by a slow blue light flash (every 5 seconds).
Charging and File Transfer
Song Download: Use the magnetic data cable to connect the headphones to a computer. The headphones will appear as a removable disk (e.g., "U DISK"). Transfer music files (MP3, WMA, WAV, APE, FLAC) to this disk.
Charging:
- Connect the magnetic charging cable to the headset's magnetic charging port.
- The headset uses a built-in rechargeable battery. Ensure it is fully charged before first use.
- Low battery is indicated by a "drop" voice prompt.
- Charging takes approximately 2 hours.
- Charging Indicator: Blinking breathing indicator while charging; solid blue indicator when fully charged.
Warnings:
- Magnetic charging has positive and negative electrodes; ensure correct adsorption for charging. Incorrect connection may cause a short circuit.
- Dispose of rechargeable batteries properly for recycling. Do not expose batteries to fire.
Precautions
- Do not soak the earphones in seawater or saltwater for extended periods. Rinse the magnetic charging part with fresh water after use.
- If not used for a long time, charge the battery at least once a month.
- Do not disassemble any part of the product without authorization. If a defect is found, stop using the product immediately and contact the seller for after-sales service.
- After each exercise, wipe off any water on the headset surface, especially around the magnetic charging port, to prevent sweat and saltwater from corroding the port and affecting product lifespan.
- Keep the product away from fire, heat sources, freezing sources, and chemicals. Avoid violent impact, disassembly, and extrusion.
- Use a charging head with an output of 5V/1A or less. Charging with more than 5V may cause the earphone to overheat, potentially damaging the battery and motherboard.