JLab JBuds Air ANC True Wireless Earbuds

Warranty & Support

Your Warranty: All warranty claims are subject to JLab Audio authorization and at our sole discretion. Retain your proof of purchase to ensure warranty coverage.

Contact Us: Reach out to us at support@jlabaudio.com or visit jlabaudio.com/contact.

Register Today: Visit jlabaudio.com/register for product updates, how-to tips, and FAQs.

First Time Setup

1. Auto-Connecting Earbuds

Press and hold both touch sensors for 3+ seconds to power ON. One earbud will blink blue/white, indicating it is ready to pair to your device.

2. Connecting to Bluetooth

Select "JLab JBuds Air ANC" in your device's Bluetooth settings. A voice prompt "Bluetooth connected" followed by solid white lights will indicate you are connected.

Adding New / Additional Bluetooth Devices

Turn OFF Bluetooth from any previously connected device. Turn ON Bluetooth from the new device. The earbuds will automatically enter Bluetooth Pairing mode. Select "JLab JBuds Air ANC" in the new device's settings to connect.

Button Functions

Left Earbud:

• Volume Down: Single Tap
• Siri (iOS) or "OK Google" (Android): Double Tap
• Be Aware / ANC ON / ANC OFF: Press & hold 1+ sec
• Turn ON: Press & hold 3+ sec
• Change EQ: Triple Tap (JBuds Air ANC will cycle through 3 EQ settings)

Right Earbud:

• Volume Up: Single Tap
• Answer / Hang Up Call: Single Tap to Answer, Double Tap to Hang Up
• Reject Incoming Calls: Press & hold 1+ sec
• Play / Pause: Double Tap
• Track Forward: Press & hold 1+ sec
• Turn ON: Press & hold 3+ sec
• Change EQ: Triple Tap (JBuds Air ANC will cycle through 3 EQ settings)

Music / Movie Mode: Press and hold both touch sensors simultaneously for 3+ seconds.

Power Off Without Charging Case: Turn off your Bluetooth from your device settings. The earbuds will then power off automatically after 3 minutes.

Voice Prompts

• "Ready to Pair": JBuds Air are ready to pair to your Bluetooth device.
• "Bluetooth Connected": Earbud is connected to your device.
• "Battery Full": Indicates battery is 100-80%.
• "Battery Medium": Indicates battery is 80-20%.
• "Low Battery": Indicates battery is less than 20%. When power decreases to 10%, this prompt will play.

Custom EQ3 Sound Modes

Tap either the right or left earbud 3 times to cycle through different EQ settings. The JBuds Air ANC will cycle through 3 EQ settings:

• JLab Signature: JLab C3™ signature sound with amplified bass and vocals.
• Balanced: Even sound with no additional enhancements.
• Bass Boost: Amplified bass and sub-bass.

Charging Earbuds

1. Charging: Match the corresponding L (Left) and R (Right) letters on the charging case for proper charging. The earbuds will auto power OFF and start charging. Blue lights indicate the earbuds are charging and will turn OFF when fully charged.

2. Auto Reconnect: Earbuds will auto power ON and reconnect to your device when taken out of the case.

Charging Case

Connect the JBuds Air ANC charging case to a computer or USB 5V 1A (or less) output device. LEDs pulse white when charging and turn solid white when fully charged.

Fitting

Try all the optional Cush Fins™ and ear tips for the best fit and proper seal. The Cush Fin should be aligned by positioning its contour around the microphone hole.

Troubleshooting

No Audio in One Earbud or Earbuds Disconnected (Manual Reset)

1. Enter your Bluetooth device settings and "forget" the JBuds Air ANC.
Diagram: Shows a smartphone screen with Bluetooth settings, highlighting the option to "forget" or remove the device.
2. Open the charging case and keep the earbuds inside.
Diagram: Shows the charging case open with earbuds inside.
3. On ONE earbud, quickly tap the touch sensor 7 times. The light will blink blue 3 times then turn off. Repeat the same steps with the other earbud.
Diagram: Shows an earbud with a finger tapping the touch sensor multiple times, with text "7x tap".
4. Wait 10 seconds, then open the charging case. Wait for one of the earbuds to blink blue/white. You are now ready to pair to your Bluetooth device.

Echoes on Calls

If you experience microphone echo or poor call quality with the JBuds Air ANC, make sure the Cush Fin is not blocking the microphone port.

Quick Tips

• Either earbud can connect to your device and be used independently. Simply take out an earbud from the charging case, and it will auto-connect.
• Choosing the correct ear tip makes a significant improvement in audio quality due to a proper seal for the driver. Try all ear tips for best results.

Warning

Fully dry off the earbuds before putting them in the charging case to avoid any damage to the case. The earbuds are sweat/water resistant, but the case is not.

Cautions

• Avoid extreme heat, cold, and humidity.
• Avoid dropping or crushing the earbuds.
• Wax may build up in the earbud tips, lowering sound quality. Carefully remove the wax with a cotton swab or other small tool to improve sound quality.
• If you experience discomfort or pain, try lowering the volume or discontinuing use temporarily.
• If you experience regular discomfort while using this product, discontinue use and consult your physician.
• Treat your earbuds with care, similar to how you would treat sunglasses, and keep them in a safe location when not in use.