GOTRAX GXL Folding Electric Scooter User Manual

Introduction

Congratulations on your purchase of the GOTRAX GXL Folding Electric Scooter!

This user manual is designed to help you assemble and operate your new electric scooter safely and effectively. Please read ALL OF THE INFORMATION in this manual before riding.

Note to all riders under 18 years of age: It is very important that you obtain parental permission before riding your electric scooter.

Safety First

Don't Ride Until You Read This:

• ⛑️ ALWAYS wear a helmet when riding your electric scooter.
• ? Make sure your scooter has a full battery before taking it out to ride.
• ? Always be aware of local road laws, and follow them.
• ? Do not ride the scooter under the influence of drugs or alcohol.
• ? Always respect pedestrians.
• ?️ Do not ride under wet conditions. The scooter may slide from under your feet causing injury. Wet conditions may damage the electronics and void the warranty.

Warning Message

1. Avoid water: The scooter is not waterproof. Electronics may be damaged by water, and water damage is not covered by warranty. Riding in wet conditions is dangerous and may result in injury.
2. Abuse: Physical damage due to negligent care or extreme riding is not covered.
3. Risk of Injury: Whenever you ride the GOTRAX scooter, you risk severe injury or even death from loss of control, collisions, and falls. Use caution and ride at your own risk.
4. Modification: Do not modify the product from the manufacturer's original design.
5. Moving Parts: Keep hands and all body parts away from moving parts while operating the scooter.
6. Pre-Ride Check (Operation): Before riding, be sure to check the scooter over and ensure it is operating correctly before each use.
7. Pre-Ride Check (Brakes): Before riding, be sure to check that the braking system is functioning properly; also, check that all safety labels are in place and you understand the safety warnings.
8. Pre-Ride Check (Guards): Before riding, be sure that any and all axle guards, chain guards, or other covers/guards supplied by the manufacturer are in place and in serviceable condition.
9. Pre-Ride Check (Tires): Before riding, be sure to check that the tires are in good condition, inflated properly, and have sufficient tread remaining.
10. Load Rating: Never exceed the 220 lb (100 kg) maximum load rating.
11. Age Limit: The electric scooter should never be used by children under the age of 13.
12. Maximum Speed: Your electric scooter has a maximum speed of 15.5 mph.

Getting Started

Unpack

You should find each of these items in your box:

• 1. Electric Scooter
• 2. Console & Handlebars
• 3. Approved Power Adapter / Charging Unit
• 4. Allen Wrench
• 5. Screws
• 6. Tire Pump Extender
• 7. Safety Pin

Diagram Description: Visual representation showing the items included in the box: a folded scooter, handlebars/console unit, a charging adapter, an Allen wrench, screws, a tire pump extender, and a safety pin.

Remove all packaging material, then inspect each item for any accidental damage that may have occurred during shipping.

Get To Know Your Scooter

The electric scooter comes partially assembled.

Diagram Description: A side view of the GOTRAX GXL electric scooter with various parts labeled. Key components include: Headlight, Tiller, Hub Motor, Accelerator (right thumb throttle), Console, Charger Port, Hook, Brake (left thumb throttle), Folding System, Rear Brake, Fender Buckle, Rear Reflector, Kickstand, and Disc Brake.

Assembly Instructions

Assemble Your Scooter

1. UNFOLD SCOOTER & LOCK IN UPRIGHT POSITION: Press down on the rear fender, separate the folding hook and fender buckle, then lift the tiller upright. Once the scooter is locked in the upright position, verify by gently trying to fold.

   Diagram Description: Shows pressing down on the rear fender and lifting the tiller to unfold the scooter.

2. LOOSEN SCREWS & DETACH COVER: Use the Allen wrench to loosen the screws located at the hook and detach. Once you've removed the hook and screws, make sure to remove the cover from the top of the tiller.

   Diagram Description: Illustrates using an Allen wrench to loosen screws near the hook mechanism on the tiller, and removing a cover.

3. PLACE CONSOLE INTO TILLER & REATTACH: Place the console into the top of the tiller. Once the console is attached, use the Allen wrench to attach the hook back to the tiller with the two screws.

   Diagram Description: Shows inserting the console into the tiller and then reattaching the hook with screws using an Allen wrench.

Charging Your Scooter

Before using the scooter, you must fully charge the battery.

Diagram Description: An illustration of the electric scooter connected to a power outlet via its charging unit, with an arrow pointing to the charging port on the scooter.

Charging Instructions

1. Open the rubber charging port cover.
2. Insert the charging plug into the port.
3. The charger box will have a green light when fully charged and a red light when charging.
4. When you are done charging, be sure to cover the charging port to keep it clear of dust and debris.
5. Charging Time: 4 hours

Charging Requirement: Make sure to charge your scooter in conditions that do not exceed 104 degrees Fahrenheit (40 degrees Celsius) or go below 32 degrees Fahrenheit (0 degrees Celsius).

Console and Operation

Scooter Console Functions

Diagram Description: A close-up illustration of the scooter's console display, showing digital readouts for speed, battery level, and gear indicator.

• To power the scooter on, press and hold the red button ? for 1 second.
• To power the scooter off, press and hold the red button ? for 5 seconds.
• To power the headlight on or off, press the red button ? for 1 second while the scooter is powered on.
• To change between 1st and 2nd gear, press the red button ? for 2 seconds. The display screen on the console will switch from the number 1 (for 1st gear) to the number 2 (for 2nd gear).

The console on the scooter displays speed in MPH, battery life, and the current gear.

Riding Your Scooter

Riding Tips

1. Start riding your scooter with one foot on the platform and one foot on the ground. Use your foot on the ground to push off and, at the same time, press the throttle button to begin movement.
2. Press the brake-throttle to slow down or stop. For quicker stopping, step on the rear fender foot brake.
3. The scooter performs best on smooth surfaces such as carparks, smooth roads, footpaths, and bike lanes.
4. Always clean your scooter (wheels, platform, etc.). It is a machine and needs to be maintained.
5. Do not press the throttle while walking with the scooter beside you.
6. Be aware of the terrain you are riding on; watch out for curbs and obstacles!
7. Use the red button ? to change between gears, similar to a bicycle. Cycle through them according to the terrain and elevation. First gear provides more torque for going uphill, while second gear offers more speed for straightaways.
8. Cruise Control: To activate cruise control, press the right-hand throttle down for 10 seconds. To deactivate cruise control, press either the right-hand throttle or brake button.
9. CAUTION: The left paddle control on the console operates the motor's Electro-Magnetic brake. This brake is energized by the motor's operation and will NOT be 100% effective until the motor has been in operation for 30 seconds.

Storing Your Scooter

Putting Your Scooter Away/Folding

Before folding the scooter, make sure that the scooter is powered off and remove the safety pin.

Pull the tiller towards the back wheel, as shown in the figures. Insert the hook on the tiller into the loop on the rear fender buckle. You may hear a click, which indicates that you have successfully folded and locked the scooter.

Diagram Description: Three images illustrating the folding process: 1. Shows the mechanism near the base of the tiller being manipulated. 2. Shows the tiller being pulled back and aligned. 3. Shows the folded scooter with the tiller hook engaged with the fender buckle.

Care and Maintenance

Maintenance & Repair

If you regularly clean and maintain your electric scooter, it will extend its life.

Cleaning and Storage:

If the scooter is dirty, wipe it clean with a soft damp cloth.

Brake Adjustments & Service:

If you notice you need brake adjustments or any service on your scooter, contact the GOTRAX customer service team. They will adjust and repair your scooter. Do not repair your scooter yourself, as this can void your warranty and risk damaging the scooter.

Tires:

If you notice that the tire pressure is low, please fill to the recommended PSI on the side of the tire. Recommended PSI: 50

DO NOT use alcohol, gasoline, kerosene, or other corrosive chemical solvents to clean the scooter. It can severely damage the appearance and structure of the scooter. Please do not use a pressure washer, as it may also cause damage to the electronics.

Storage: When you're not using your scooter, store it in a dry and cool location. Avoid storing your scooter outdoors because sun exposure can damage its appearance and may cause wear on the life of the battery and tires.

Tightening the Tiller:

If you notice that the tiller is loose or wiggles while riding, you can tighten the screws. Open the plastic cover and use the Allen wrench to tighten the screws.

Safety Features

Safety Lock Instructions

1. Unfolding: Lift the tiller in the upright position and insert the safety lock. Rotate the safety lock clockwise to tighten the safety lock before you ride!

   Diagram Description: Four images showing the safety lock mechanism. 1. Locating the hole near the red lever. 2. Arrow pointing to the safety pin. 3. Inserting the safety pin. 4. Twisting the safety pin to secure it.

2. Folding: Rotate the Safety Lock counterclockwise to pull out the safety lock. Fold the scooter and then insert the safety lock and rotate clockwise to lock the safety lock again.

Battery Information

Only use the approved GOTRAX power adapter to charge your scooter; using others may cause a risk of fire, and equipment may be damaged.

Improper disposal of used batteries may seriously pollute the environment. Please comply with local disposal regulations.

Make sure to store your scooter and power adapter in conditions that do not exceed 122 degrees Fahrenheit (50 degrees Celsius) or go below -4 degrees Fahrenheit (-20 degrees Celsius).

Warning - Risk of Fire: No User Serviceable Parts. Prolonged exposure to UV Rays, Rain, and the Elements may damage the enclosed materials. Store indoors when not in use.

Support and Warranty

Troubleshooting

We frequently update our user manuals at gotrax.com, and reserve the rights to update and change manuals online.

Please contact the GOTRAX customer service team if you are experiencing problems or need more detailed information. They can be reached at gotrax.com.

Warranty

For warranty information, please visit us at www.gotrax.com.