LSC Smart Connect
Document Date: JULY 2022
Getting Started
Before you start adding this LSC Smart Connect product, write down the name and password, including spaces and capital letters, of your WiFi network. Make sure you have a strong Wi-Fi signal.
Note: This item only works on 2.4GHz WiFi network, not on 5GHz WiFi network. If you get a message that the product only works on 2.4 GHz networks, then you need to change your network's Wi-Fi frequency to 2.4 GHz in the settings menu of the router. Please contact your internet provider for this.
- Download the LSC Smart Connect app from the Google Play Store, the Apple Store or scan the QR code.
- Open the app. Are you using the app for the first time? Then follow the instructions on the screen to create your account.
- Turn the device on. Do you have Bluetooth on your phone and is it turned on? Then a connection is made automatically. Can't connect automatically? Then add this device by touching the + (top right corner of the screen). Follow the prompts to complete the installation. For more information, see our website: www.lsc-smartconnect.com
- Reset: You may need to reset the product first. You do this by turning the lamp on / off / 3 times. The lamp will start blinking. Then proceed with step 3.
Declaration of Conformity
We, Action Service & Distribution B.V., declare as the manufacturer that this "radio equipment" is produced in China. The products comply with all relevant CE standards and regulations.
The full list of harmonized standards related to Directive 2014/53/EU can be found at: https://eur-lex.europa.eu
The full declaration of conformity can be found at http://www.lsc-light.com.
For other compliant-related information, please contact:
- Website: http://www.lsc-light.com
- Email: info@action.nl
- Postal address: P.O. Box 130, 1600 AC Enkhuizen, The Netherlands
General Safety Instructions
Safety: If applicable: only use this device for intended purpose; do not use this device if damaged or defective. If this product is damaged, especially if the cable or fitting is damaged, this product must be shut down immediately. In this case, replacement is required; before replacing, turn off power and let device cool to avoid electrical shock or burn. The adapter (if applicable) must be installed near the device, not connected to any other adapter, and easily accessible. Products may only be used in combination with the original adapter. This product should only be opened by an authorized technician when maintenance is required. Never carry out repairs yourself. To disconnect voltage: pull the plug.
Disposal, Warranty, Disclaimer and Intended Use
Disposal: This product is made of high quality materials and parts that can be recycled. If you see this symbol [WEEE symbol] on your product, it means that the product is covered by EU Directive 2002/96/EC. Ask your own local government about the way in which electrical and electronic products are collected separately in your region. When disposing of old products, observe local legislation and do not dispose of these products in the normal household waste. Properly disposing of old products will prevent adverse effects on the environment and public health.
Warranty: Any changes and/or modifications to the product will void the warranty. We cannot accept any liability for damage caused by incorrect use of the product.
Disclaimer: Designs and specifications might be subjected to change without notice. All logos, brands and used product references are trademarks or registered trademarks of their respective holders and hereby recognized as such.
French Recycling Note: Les ampoules se recyclent. Points de collecte sur www.quefairedemesdechets.fr
