LSC Smart Connect
Welcome to your LSC Smart Connect device. This document provides essential information for setup, safety, and compliance.
Getting Started
Before adding your LSC Smart Connect product, ensure you have your WiFi network name and password ready, including spaces and capital letters. A strong Wi-Fi signal is recommended.
Important Note: This product operates exclusively on 2.4GHz WiFi networks, not 5GHz networks. If you encounter messages indicating incompatibility with 5GHz networks, you may need to adjust your router's Wi-Fi frequency settings to 2.4 GHz. Consult your internet provider for assistance.
- Download the LSC Smart Connect app from the Google Play Store or Apple Store, or scan the QR code.
- Open the app. If this is your first time using the app, follow the on-screen instructions to create your account.
- Turn on the device. Ensure Bluetooth is enabled on your phone. A connection should be established automatically. If automatic connection fails, add the device manually by tapping the '+' icon (usually in the top right corner of the screen). Follow the prompts to complete the installation. For more details, visit: www.lsc-smartconnect.com
- Reset Procedure: You may need to reset the product before setup. To do this, turn the device on and off three times. The indicator light will begin blinking, signaling it's ready for pairing. Then, proceed with step 3.
Declaration of Conformity
Action Service & Distribution B.V. declares that this "radio equipment" is manufactured in China. The products comply with all relevant CE standards and regulations. The full list of harmonized standards related to Directive 2014/53/EU can be found at: https://eur-lex.europa.eu. The complete declaration of conformity is available at: http://www.lsc-light.com. For further compliance information, please contact Action Service & Distribution B.V. at info@action.nl or by post to P.O. Box 130, 1600 AC Enkhuizen, The Netherlands.
General Safety Instructions
Safety Precautions:
- Use this device only for its intended purpose.
- Do not use the device if it is damaged or defective. If the product, cable, or fitting is damaged, shut it down immediately.
- Replacement of parts requires the product to be powered off and cooled to prevent electrical shock or burns.
- The adapter (if applicable) must be installed near the device, not connected to other adapters, and must be easily accessible.
- Products must only be used with the original adapter.
- Only authorized technicians should open this product for maintenance. Never attempt repairs yourself.
- To disconnect power, pull the plug.
Disposal, Warranty, Disclaimer, and Intended Use
Product Disposal: This product is made from high-quality, recyclable materials. If you see the [recycling symbol] on your product, it signifies compliance with EU Directive 2002/96/EC (WEEE). Please consult your local government for proper collection procedures for electrical and electronic products in your region. Dispose of old products according to local legislation and do not mix them with household waste. Proper disposal helps prevent negative environmental and public health effects.
Warranty: Any changes or modifications to the product will void the warranty. Action Service & Distribution B.V. is not liable for damage caused by incorrect product use.
Disclaimer: Designs and specifications are subject to change without notice. All logos, brands, and product references are trademarks or registered trademarks of their respective holders.
Contact Information
For further information, please visit: www.lsc-smartconnect.com
