Smartwatch User Guide

Preliminary Product Understanding

This section provides an overview of the smartwatch components and charging process.

Key Components:

• Magnetic Charging Cable: Used for charging the device.
• Power Key: The main button for device operation.
• Product Front: Features a light sensor.
• Product Back: Contains the magnetic charging contacts.

Charging Mode:

Press and hold the “On” button until the startup page appears. If the watch does not turn on, it may be due to prolonged storage. Charge the watch for approximately 10 minutes, then wait for it to turn on automatically.

Procedure for Use

Follow these steps to set up and start using your smartwatch.

1. Wearing a Watch:

1. Wear
2. Boot Up
3. Setting the watch
4. Start Using

Tips for Accurate Data Measurement:

1. Place the watch about two fingers away from the wrist bone.
2. Adjust the watch band to a comfortable elasticity, maintaining a gap of about one finger between the band and the wrist. This ensures the back of the watch rests against the skin for a comfortable and accurate fit.

2. Boot Up:

Press and hold the power button to turn on the device.

3. Setting the Watch:

1. Search for “FitCloudPro” on Google Play or Apple App Store.
2. Download the “FitCloudPro” application.
3. Scan the QR code on the watch to connect the watch.
4. On your mobile phone, view and display the “Telephone Binding Request” and click “Pair”.
5. Confirm the pairing request.
6. Click the “Phone” icon and set the switch for call audio and media audio.
7. Open Media Audio, and the watch will play music from your phone.

4. Start Using:

The smartwatch supports full-screen touch operations, including swiping, tapping, and long pressing.

• Slide up: Accesses specific functions.
• Slide left/right: Navigates through different screens or options.
• Slide down: Accesses the control center for quick settings.

Common Functions

• Sports Mode: Enter exercise mode to start recording exercise data.
• Time Setting: Access watch settings to adjust the time.
• Control Center: Slide down the screen to access controls and select desired functions.
• Alarm Settings: Go to watch settings to set alarms.

Product Specification

Precautions

• Not intended for use in bathing, diving, water skiing, or other activities involving heat, hot air, or high-velocity water.
• Interface or usage may change due to firmware upgrades; refer to product updates for the latest information.

Procedure for Use - Troubleshooting

If you encounter any problems with the product, you can find solutions in the “My → FAQ or Feedback” section within the FitCloudPro App.

Information to User (FCC Compliance)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Important: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement and can be used in portable exposure condition without restriction.