Hot Wheels Sky Crash Tower Track Set

1. Contents

Main Frame & Base

Diagram showing various blue and orange plastic pieces labeled A through V, representing the base structure and vertical supports.

Upper Curves

Diagrams showing orange curved track pieces labeled Z, K, M, L, with quantities indicated (x2).

Lower Curve

Diagram showing orange curved track pieces labeled Y.

Assembly Icons Key

A visual key explaining icons used in the booklet, such as a "click" symbol (▶️), a "snap to connect" symbol (?), a "completed" symbol (✔️), and a "refer to letters" symbol (?).

2. Apply Labels

Instructions for applying adhesive labels to the track pieces.

3. Assembly - Main Frame & Base

Parts Needed:

T, U, D, V, G, K, M, D, I, G, A, L, B, C, C, H, E, F, F, B, F, H, A, A.

1. Step 1a-d: Assemble Main Frame

   Connect blue frame pieces (A, B, C, D) to form the main vertical structure. Diagrams show specific connection points and orientation ("RIGHT SIDE").

2. Step 2: Attach Support Pieces

   Attach orange track support pieces (E, F, G, H) to the assembled blue frame.

3. Step 3a-c: Assemble and Attach Booster

   Assemble and attach the motorized booster unit using parts G, E, F, C, D, H. Diagrams provide "BOTTOM VIEW" and "RIGHT SIDE" perspectives.

4. Assembly - Upper Curves

Parts Needed:

H, I, J, K, L, M, Z (some parts x2).

1. Step 1: Assemble Upper Tower

   Assemble the upper tower structure with track pieces (I, J, K, M, L). A "LEFT SIDE" label indicates orientation.

2. Step 2: Attach Track Pieces

   Attach more track pieces to the tower. A "RIGHT SIDE" label indicates orientation.

3. Step 3: Connect Track

   Connect additional curved track pieces.

4. Step 4a-b: Connect Booster and Track

   Connect the booster mechanism and track pieces. A "ONE-TIME ASSEMBLY" note is present.

5. Step 5: Attach Spiral Track

   Attach the spiral track pieces. "BOTTOM VIEW" and "LEFT SIDE" labels are provided.

5. Assembly - Loop

Parts Needed:

N, O, P, Q, R, S, T, U, V.

1. Step 1: Assemble Loop Section

   Assemble the orange loop track using parts N, O, P, Q, R.

2. Step 2a-b: Connect Loop to Structure

   Connect the assembled loop section to the main structure. A "ONE-TIME ASSEMBLY" note is present.

6. Assembly - Lower Curve

Parts Needed:

Y.

1. Step 1: Assemble Lower Curve

   Assemble the orange lower curve track pieces (Y).

2. Step 2: Connect Lower Curve

   Connect the lower curve track to the main structure.

3. Step 3: Connect Lower Curve

   Connect the lower curve track.

4. Step 4: Connect Lower Curve

   Connect the lower curve track. A "BOTTOM VIEW" label is provided.

7. Completed Assembly & Battery Installation

Completed Assembly

Visual representations of the fully assembled Hot Wheels Sky Crash Tower track set, shown from the front and back.

Battery Installation

Instructions:

• Unscrew battery covers with a Phillips head screwdriver (not included).
• Install 4 new D (LR20) alkaline batteries (not included) in the battery boxes.
• Replace battery covers and tighten screws.
• Replace batteries if the booster can no longer propel vehicles through the track set.
• For longer life, use alkaline batteries.
• When exposed to an electrostatic source, the product may malfunction. To resume normal operation, remove and reinstall the batteries.
• The toy is not to be connected to more than the recommended number of power supplies.

Battery Indicator:

I = ON (Encendido / Marche / Ligado)

O = OFF (Apagado / Arrêt / Desligado)

Warning: DO NOT TURN ON BEFORE ASSEMBLY.

8. To Play

1. Turn on the Booster

   Locate the ON/OFF switch on the booster unit and set it to ON (I).

2. Launch Cars

   Launch Hot Wheels vehicles through the motorized booster.

Play Features:

• Spiral Drop! Cars descend the spiral track.
• Park Up to 24 Cars! Designated parking areas on the tower can hold up to 24 vehicles.
• Crash Zone! Experience exciting crashes.
• Jump Ramp! Launch cars for exciting jumps.

Notes: Not compatible with some Hot Wheels vehicles. One vehicle is included; additional vehicles sold separately. Other Hot Wheels tracks and sets sold separately.

9. Storage

Follow the steps to fold the track pieces and the tower for storage and portability. Diagrams show how to collapse the structure.