19-Up Ram 1500 Crew Cab Overland Steps
By Rough Country Suspension Systems
Part Number: 921400800
Introduction
Thank you for choosing Rough Country for all your vehicle needs. Please read these instructions thoroughly before beginning installation. Verify the kit hardware against the kit contents listed below. Ensure you have all necessary parts and understand their placement.
If you have any questions, please contact Rough Country customer support at 1-800-222-7023. We are happy to assist you with any questions concerning this product.
After installation, check all fasteners for proper torque. Ensure adequate clearance between all components. Periodically check all hardware for tightness. ⚙️ [check tightness]
Product Overview
The Rough Country Overland Steps are designed for the 19-Up Ram 1500 Crew Cab, providing a durable and stylish step-up solution for accessing your vehicle. These steps feature a robust construction and a textured surface for secure footing. The kit includes steps, mounting brackets, and all necessary hardware for installation.
Visual Description of Product: The image shows a pair of black, rectangular side steps with a textured, perforated surface. Each step has the 'RC' logo subtly integrated into its design. They are designed to mount underneath the vehicle's frame.
Kit Contents
- Driver Side Step x1
- Pass Side Step x1
- Driver Side Rear Bracket x1
- Driver Side Front / Center Bracket x2
- Pass Bracket x3
Tools Needed
- 13mm Wrench / Socket
Hardware Included
- 8mm x 30mm Bolt x6
- 8mm Flat Washer x30
- 8mm Lock Washer x6
- 8mm Lock Nut x24
- 8mm T-Bolt x6
Torque Specifications
| Size | Imperial (ft/lbs) | Size | Metric (ft/lbs) | ||
|---|---|---|---|---|---|
| Grade 5 | Grade 8 | Class 8.8 | Class 10.9 | ||
| 5/16" | 15 | 20 | 6MM | 5 | 9 |
| 3/8" | 30 | 35 | 8MM | 18 | 23 |
| 7/16" | 45 | 60 | 10MM | 32 | 45 |
| 1/2" | 65 | 90 | 12MM | 55 | 75 |
| 9/16" | 95 | 130 | 14MM | 85 | 120 |
| 5/8" | 135 | 175 | 16MM | 130 | 165 |
| 3/4" | 185 | 280 | 18MM | 170 | 240 |
Installation Instructions
Bracket Placement Diagram Description: The diagram illustrates the mounting points for the brackets on the vehicle frame. It shows separate bracket configurations for the 'Passenger Front' and 'Driver Front' sides, indicating where the brackets attach to the vehicle's factory mounting holes.
- Remove stock steps if installed. Stock hardware will not be reused. ❌ [not reused]
- Refer to the bracket placement diagram and install the front bracket in the factory mounting holes on the driver side. Use the supplied 8mm bolts, lock washers, and flat washers. See Photo 1. Tighten using a 13mm wrench / socket.
Photo 1 Description: This photo shows the installation of the front bracket onto the vehicle's frame using bolts, washers, and a socket wrench. The bracket is positioned in the factory mounting holes.
- Refer to the bracket placement diagram and place the center and rear brackets in position on the factory mounts. Secure using the supplied 8mm bolts, lock washers, and flat washers. Tighten using a 13mm wrench / socket. See Photo 2.
Photo 2 Description: This photo illustrates the attachment of the center and rear brackets to the vehicle's frame. Bolts, lock washers, and flat washers are used, and a socket wrench is shown for tightening.
- Place the steps onto the installed step brackets. Align the mounting plates on the steps and brackets. Place the nut plate within the mounting plates on the steps and secure using the supplied 8mm bolts, lock washers, lock nuts, and (4) flat washers for each bolt plate. Tighten with a 13mm wrench. See Photo 3 & 4.
Photo 3 Description: This photo provides a rear view of the installation, showing the rear bracket being secured to the vehicle frame with hardware. The step is positioned above the bracket.
Photo 4 Description: This photo shows the process of installing the nut plate and hardware into the step's mounting plate, preparing to connect it to the vehicle bracket.
- Repeat the installation process for the passenger side of the vehicle.
- Periodically check and tighten all hardware. ⚙️ [check tightness]
Legal Disclaimer
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all applicable Federal, State, and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be the buyer's responsibility to comply with all Federal, State and Local laws governing the sales of any items listed, illustrated or sold. The buyer expressly agrees to indemnify and hold harmless Rough Country, LLC for all claims resulting directly or indirectly from the purchase, ownership, or use of the items.
