Rough Country 09-24 Ram 1500 / 10-24 Ram 2500 Side Window Deflectors
Installation Guide and Product Information
Introduction
Thank you for choosing Rough Country for all your vehicle needs. Please read these instructions before beginning installation. Check the kit hardware against the kit contents shown below. Be sure you have all needed parts and know where they go.
If you have questions, please call Rough Country at 1-800-222-7023. We will be happy to answer any questions concerning this product. Check all fasteners for proper torque. Ensure adequate clearance between all components. Check and retighten wheels at 50 miles and again at 500 miles. Periodically check all hardware for tightness.
Kit Contents
- 1x DR Front Guard
- 1x DR Rear Guard
- 1x PASS Front Guard
- 1x PASS Rear Guard
Hardware Included
- 4x Alcohol Wipes
Torque Specifications
| Size | Grade 5 | Grade 8 | Size | Class 8.8 | Class 10.9 |
|---|---|---|---|---|---|
| 5/16" | 15 ft/lbs | 20ft/lbs | 6MM | 5ft/lbs | 9ft/lbs |
| 3/8" | 30 ft/lbs | 35ft/lbs | 8MM | 18ft/lbs | 23ft/lbs |
| 7/16" | 45 ft/lbs | 60ft/lbs | 10MM | 32ft/lbs | 45ft/lbs |
| 1/2" | 65 ft/lbs | 90ft/lbs | 12MM | 55ft/lbs | 75ft/lbs |
| 9/16" | 95 ft/lbs | 130ft/lbs | 14MM | 85ft/lbs | 120ft/lbs |
| 5/8" | 135ft/lbs | 175ft/lbs | 16MM | 130ft/lbs | 165ft/lbs |
| 3/4" | 185ft/lbs | 280ft/lbs | 18MM | 170ft/lbs | 240ft/lbs |
Installation Instructions
Step 1: Placement Test
Place the guard above the window to ensure proper placement. (See Photo 1 description).
Photo 1 Description: A hand holding a side window deflector in position above a vehicle's window frame for placement testing.
Step 2: Clean Surface
With an alcohol wipe, clean the area above the window where the guard will be placed. (See Photo 2 description).
Photo 2 Description: An alcohol wipe being used to clean the area above a vehicle's window frame where the deflector will be attached.
Step 3: Peel Adhesive
Peel back the adhesive strip on the guard. (See Photo 3 description).
Photo 3 Description: A finger peeling back the adhesive backing strip from a side window deflector.
Step 4: Position Guard
Place the guard in the desired location. (See Photo 4 description).
Photo 4 Description: A side window deflector being pressed into its final position on a vehicle's window frame.
Step 5: Repeat for Remaining Windows
Repeat steps 1-4 for the remaining windows.
Legal Disclaimer
By purchasing any item sold by Rough Country, LLC, the buyer expressly warrants that he/she is in compliance with all applicable State and Local laws and regulations regarding the purchase, ownership, and use of the item. It shall be the buyer's responsibility to comply with all Federal, State, and Local laws governing the sales of any items listed, illustrated, or sold. The buyer expressly agrees to indemnify and hold harmless Rough Country, LLC for all claims resulting directly or indirectly from the purchase, ownership, or use of the items.
