Important Safety Notice
Always use proper tools. Follow assembly steps in order and do not skip any steps. Check all packing materials carefully for small parts that may have come loose during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. Do not use substitute parts. Periodically check to ensure that all connectors (bolts, screws, etc.) are tight. Keep these instructions for future reference.
Be very careful when handling glass or mirrors, as severe injury may result if they break. Never handle large pieces of glass or mirrors by yourself. When assembling products with electric cords, always ensure the cord is unplugged before assembly and be careful not to twist the cord during assembly.
When assembling shelves or entertainment centers, do not stand on lower shelves to assemble upper shelves; use a step ladder. Do not stand on tables, including end tables, coffee tables, and dinner tables, as they are not designed to support the weight of a person. Where assembly instructions state that two or more people are required, do not attempt by yourself as there is a risk of injury.
Note: Your unit may look different in appearance from the one shown in the illustrations on this instruction sheet.
Parts List
The following parts and hardware are included:
Parts:
- A x 1
- B x 2
- C x 1
- D x 2
- E x 2
- F x 2
- G x 2
Hardware:
- H: Bolts (1/4"x20mm) x 6
- J: Bolts (1/4"x16mm) x 8
- K: Nuts (1/4") x 8
- L: Nuts (1/4") x 8
- M: Bolts (1/4"x16mm) x 16
- N: M4 Allen Wrench x 1
Assembly Steps
Important: Unit should be assembled by two or more people. Do not tighten any bolts until all bolts have been started!
Step 1: Assemble Headboard/Footboard Posts
Diagram shows part B (side post) being attached to part A (top rail) using bolts and nuts. An arrow indicates the direction of insertion. Repeat this process for all four connection points of the headboard and footboard frame.
Step 2: Attach Side Rails
Diagram shows side rails E and D being attached to the assembled headboard/footboard posts. Arrows indicate insertion of bolts and nuts. Use bolts J and nuts K to secure side rails E and D to the posts. Use Allen wrench N for tightening.
Step 3: Install Support Slats
Diagram shows support slats F and G being placed across the bed frame and secured to the side rails. Arrows indicate insertion of bolts. Position support slats F and G across the bed frame and secure them to the side rails using bolts H.
Step 4: Final Assembly and Tightening
Diagram shows the complete bed frame with arrows pointing to all connection points for final tightening. Once all parts are assembled and all bolts are started, go back and securely tighten all bolts using the provided Allen wrench N and any other necessary tools.
Model Variations
The following models share the same assembly process and general design:
- B280-681
- B280-672
- B280-671
Page 5 of the original document displays the visual representations of these three models.
