Signature Design by Ashley B280-782 Bed Frame Assembly Instructions

Important Safety Information

IMPORTANT SAFETY NOTICE: READ CAREFULLY BEFORE BEGINNING ASSEMBLY!

• Always use proper tools.
• Follow the assembly steps in order. Do not skip any steps.
• Check all packing materials carefully for small parts that may have come loose inside the carton during shipment. If parts are missing, contact the retailer from which you purchased the product to obtain any missing parts. DO NOT USE SUBSTITUTE PARTS.
• Periodically check to ensure that all connectors (bolts, screws, etc.) are tight.
• Keep the instructions for future reference.
• Some assembly may involve attaching glass or mirrors. Be very careful handling the glass or mirrors, as severe injury may result if the glass or mirror breaks. Never handle large pieces of glass or mirrors by yourself.
• When assembling products that have electric cords (lamps, light, etc.), always (1) make sure the electrical cord is unplugged before assembly and (2) be careful not to twist the electrical cord during assembly.
• When assembling shelves or entertainment centers, do not stand on lower shelves in order to assemble upper shelves – use a step ladder.
• Do not stand on tables, including but not limited to, end tables, coffee tables, and dinner tables, as tables are not to support the weight of a person.
• Where assembly instructions state that the assembly requires two or more people, do not attempt by yourself as there is a risk of injury.

NOTE: ASHLEY FURNITURE INDUSTRIES, LLC DISCLAIMS ANY LIABILITY FOR DAMAGES OR INJURIES WHICH MAY OCCUR DUE TO FAILURE TO PROPERLY FOLLOW ASSEMBLY INSTRUCTIONS, PROPERLY ASSEMBLE THE PRODUCT, OR PROPERLY USE THE PRODUCT.

NOTE: YOUR UNIT MAY LOOK DIFFERENT IN APPEARANCE FROM THE ONE SHOWN IN THE ILLUSTRATIONS ON THIS INSTRUCTION SHEET.

Spanish Summary: This section reiterates the importance of reading instructions, using correct tools, checking parts, tightening connections, handling glass with care, and seeking assistance for assembly. It also includes the company's liability disclaimer.

French Summary: This section emphasizes using appropriate tools, following assembly order, checking packaging for parts, tightening connectors, keeping instructions, handling glass carefully, unplugging electrical cords, using ladders, not standing on tables, and needing assistance for two-person assembly. It also includes the company's liability disclaimer.

Chinese Summary: This section stresses using suitable tools, following assembly steps sequentially, checking packaging for loose small parts, contacting retailers for missing parts, not using substitute parts, periodically checking connectors, keeping instructions, handling glass and mirrors with caution, unplugging electrical cords, using ladders for higher shelves, not standing on tables, and the risk of injury if assembly requires multiple people and is attempted alone. It also includes Ashley Furniture Industries, LLC's disclaimer for damages or injuries due to improper assembly or use.

Parts List

For replacement parts, please contact Ashley Furniture Industries, LLC:

• Email: RTAParts@ashleyfurniture.com
• Website: www.ashleyfurniture.parts
• Phone: 1-844-966-0809

Assembly Steps

NOTE: UNIT SHOULD BE ASSEMBLED BY TWO OR MORE PEOPLE. DO NOT TIGHTEN ANY BOLTS UNTIL ALL BOLTS HAVE BEEN STARTED!

Spanish Note: ¡ESTA UNIDAD DEBE SER ARMADA POR 2 O MAS PERSONAS! NO APRIETE NINGUN PERNO HASTA QUE TODOS ESTEN EN SU LUGAR!

French Note: REMARQUE: LE MEUBLE DOIT ETRE ASSEMBLÉ PAR DEUX PERSONNES OU PLUS! NE BLOQUER AUCUNE VIS TANT QUE VOUS N'AVEZ PAS COMMENCE A TOUTES LES DEMARRER!

Chinese Note: 注意:产品应由两个或者两个以上的人员组装。在产品组装过程中,不要锁紧螺栓!

Step 1: Assemble Main Frame

Attach the headboard frame (A) and footboard frame (B) to the side rails (C). Use bolts (J) with washers (M and N) for connections. Ensure all bolts are started but not fully tightened at this stage. This step involves connecting the main vertical supports (A, B) to the horizontal side rails (C).

Diagram Description: Shows the basic bed frame structure with parts A, B, and C being joined. Hardware J, M, N are indicated for these connections.

Step 2: Attach Support Bars

Connect the support bars (L) to the side rails (C). Use bolts (J) with washers (M and N) and the Allen wrench (P) for tightening. The diagram shows part L being attached to the inner side of the side rails.

Diagram Description: Illustrates attaching part L to the side rails (C) using hardware J, M, N, and tool P.

Step 3: Install Bed Slats/Supports

Install the bed slats or support bars (G, H, R) across the side rails (C). Use bolts (J) with washers (M and N) for securing these supports. The diagrams show multiple support bars being attached to the frame.

Diagram Description: Shows the installation of multiple support bars (G, H, R) onto the bed frame, secured with hardware J, M, N. Close-up views show specific connection points.

Step 4: Secure Additional Supports

Attach support brackets (D, E, F) and additional support bars (H, R) as shown in the diagrams. Use bolts (K) with washers (M and N) for these connections. The diagrams indicate specific locations for these parts to reinforce the bed structure.

Diagram Description: Depicts attaching support brackets (D, E, F) and bars (H, R) to the frame using hardware K, M, N.

Step 5: Final Tightening and Checks

Once all parts are assembled and all bolts are started, go back and fully tighten all bolts and connectors. Ensure the bed frame is stable and all parts are securely fastened.

Diagram Description: Shows a close-up of a final connection being tightened, indicating the importance of securing all hardware.

Contact Information

For replacement parts, please contact Ashley Furniture Industries, LLC:

• Email: RTAParts@ashleyfurniture.com
• Website: www.ashleyfurniture.parts
• Phone: 1-844-966-0809