Signature Design by Ashley - Replacement Part Description Form
Model #: B280-681
PART# | DESCRIPTION | USED ON: | MRP# | MATERIAL | QTY. | FACTORY USE ONLY!! PACK P/M |
---|---|---|---|---|---|---|
1 | Headboard Leg (L=565mm) | B280-681 | R58445 | Metal | 2 | B M |
2 | Side Rail #1 (L=1026mm) | B280-681 | R58456 | Metal | 2 | B M |
3 | Side Rail #2 (L=1026mm) | B280-681 | R58457 | Metal | 2 | B M |
4 | Cross Slat #1 (L=1575mm) | B280-681 | R58458 | Metal | 2 | B M |
5 | Cross Slat #2 (L=1575mm) | B280-681 | R58459 | Metal | 2 | B M |
6 | Support Leg(w/Leveler)(L=160mm) | B280-681 | R76771 | Metal | 6 | B M |
7 | Adjustable Leveler(w/Insert)(1/4inx25mm)(D=15mm) | B280-681 | R82951 | Plastic+Metal | 6 | G P |
8 | End Cap (D=38mm) | B280-681 | R58452 | Plastic | 4 | G P |
9 | Hardware Pack | B280-681 | R58453 |
| 1 | G P |
Diagrams
The following diagrams illustrate the placement of the numbered parts on the bed frame and show individual components:
Diagram 1: Bed Frame Assembly Overview
This diagram shows the assembled bed frame with key components labeled with numbers corresponding to the parts list. Number 1 points to the headboard legs, number 2 and 3 point to the side rails, and number 4 and 5 point to the cross slats.
Diagram 2: Support Leg and Side Rail Detail
This diagram shows a close-up of the support leg (labeled 2) and a side rail (labeled 3).
Diagram 3: Support Leg Detail
This diagram shows a close-up of the support leg (labeled 6).
Diagram 4: Allen Bolt and Leveler
This diagram shows an Allen bolt (labeled 7) and an end cap (labeled 8).
Diagram 5: Hardware Pack Contents
This diagram shows the contents of the hardware pack (labeled 9), including various bolts, washers, and an Allen wrench.