WTA Installation Guide

Important Safety Information

It is crucial to ensure that all WTA products are assembled and securely attached to your vehicle. Failure to do so may result in automobile accidents, posing a significant risk of bodily injury or even death to yourself and others. As the owner, it is your responsibility to properly assemble and secure WTA products, diligently inspecting the mounting points and attachments before use, and regularly checking for any signs of wear or damage.

To guarantee optimal safety, White Top Adventures strongly advises engaging the services of a professional installer for the installation of any aftermarket accessories to your vehicle. If you lack mechanical experience or are unfamiliar with the installation procedures, it is imperative to have the product installed by a qualified professional or individuals who possess the necessary expertise. Remember, the responsibility lies with you, and it must be taken seriously to ensure the safety of all individuals involved.

Package Contents

• TRANSIT HEADLINER SHELF (QTY: 1)
• HEADLINER SHELF STIFFENER (QTY: 2)
• TRANSIT CURTAIN ROD (QTY: 1)
• CURTAIN ROD BRACKET (QTY: 2)
• TRANSIT SHELF BRACKET LEFT (QTY: 1)
• M5-15 BUTTON HEAD SCREWS (QTY: 10)
• M5 WASHER (QTY: 10)
• M5 NYLOCK NUT (QTY: 8)
• TRANSIT SHELF BRACKET RIGHT (QTY: 1)

Installation Steps

Step 1: Prepare for Installation

First, remove the two screws located under the sun visor handle on both sides of the vehicle. It is important to save these screws as they will be used again later in the installation process.

Step 2: Attach Shelf Brackets

Slide the Transit Shelf Bracket between the handle base and the headliner. Align the bracket's screw holes with the existing screw holes in the vehicle. Note that one bracket is designed for each side of the vehicle, and the longer, thinner section of the bracket should point towards the back of the van. Once aligned, you may now reinstall the factory handle hardware.

Diagram Description: An illustration shows the placement of the shelf bracket relative to the vehicle's interior structure and existing hardware, indicating the correct orientation.

Step 3: Mount the Headliner Shelf

Next, place the Transit Headliner Shelf on top of the installed shelf brackets. Align the three holes on each side of the shelf with the corresponding holes on the brackets. Insert six M5 button head screws, ensuring each screw is fitted with an M5 washer and an M5 nylock nut. Tighten these securely using a 3mm Allen key and an 8mm socket.

Diagram Description: A close-up illustration demonstrates the process of attaching the headliner shelf to the brackets using M5 button head screws, M5 washers, and M5 nylock nuts.

Step 4: Install the Curtain Rod

The final step involves installing the optional curtain rod. This requires four M5 screws, four M5 washers, and two M5 nylock nuts. First, install the curtain rod brackets onto the shelf or vehicle structure as per their design. Then, mount the curtain rod onto these brackets. For some curtain types, it may be necessary to install the curtain onto the rod before the rod is attached to the brackets.

Diagram Description: A close-up illustration details the attachment of the curtain rod brackets and the curtain rod itself, showing the use of screws, washers, and nuts.