SilverStone RM44 4U Rackmount Server Chassis
User Manual
Website: www.silverstonetek.com
Parts Package Component List
- (A) Case feet
- (B) Case feet screws
- (C) Case feet washers
- (D) Handle bar
- (E) Handle bar bracket
- (F) Cable ties
- (G) Cable management buckle
- (H) Bracket
- (I) Screws
- (J) Captive thumbscrews
Hard Drives and Expansion Card Retainer Installation
- Remove 4 screws from the expansion card retainer.
- Adjust the expansion card retainer position. It is recommended to avoid the position of expansion card connectors and ensure the PSU length will not interfere. Available positions are 1, 2, 3, and 4.
- Install 2 x 3.5" HDDs on the expansion card retainer.
- Install 3 x 2.5" SSDs on the expansion card retainer.
- Install 2.5" drives on the dedicated 2.5" trays.
Expansion Card Height Limitations
Note: Please take into account the power connectors when considering height.
1. Height limitation with expansion card clip buckle installed: 113mm.
2. Height limitation with expansion card clip buckle removed: 139mm.
3. Height limitation with expansion card retainer removed: 154mm.
4. Removing the expansion card clip buckle involves pulling up and pressing/pushing.
5. Adjust the position of the expansion card retainer according to the required height of the interface card, then tighten the screw (loosen to adjust, tighten to secure).
Nvidia 30 Series Graphics Card Brackets Installation
- Install Nvidia 30 series graphics cards.
- Install the Nvidia 30 series graphics card bracket. Slightly tighten the screws, reserving space for the bracket to slide left and right.
- Once the graphics card bracket is pushed into position, tighten the thumb screw, then the graphics card screw.
Note: The Nvidia 30 series graphics card bracket supports graphics card lengths from 285mm to 344mm. The total length of the graphics card must exceed the edge of the motherboard.
Vertical Orientation Installation
- Remove L-shaped handle bar brackets on both sides.
- Remove the handle bars on both sides.
- Install the handle bar onto the flat handle bar bracket.
- Install case feet, including case feet washers.
Install Mini Redundant PSU
- If a Mini Redundant PSU is to be installed, first remove the ATX PSU bracket.
- Install the Mini Redundant PSU.
Component Restrictions
- CPU cooler height limitation: 137mm with expansion card retainer installed, and 148mm without. CPU coolers are allowed to protrude the motherboard by 15mm to avoid interference with the PSU. If hard drives are installed on the expansion card retainer, further deduct the height of the hard drives.
- When shifting the expansion card retainer, the maximum depth limitation for the PSU is 255mm to avoid interference.
- The maximum length limitation for graphics cards, front panel case fans, and radiators is 424mm.
- If the 8th slot is to be used for expansion cards, remove the 2.5" drive tray as appropriate.
Warranty Information
This product has a limited 1-year warranty in North America and Australia. For warranty periods in other regions, contact your reseller or SilverStone authorized distributor.
Chinese Warranty Note: This product enjoys a one-year limited warranty in mainland China (excluding Macau and Hong Kong SAR) from the date of purchase. For specific warranty periods, please refer to the official website: https://silverstonetek.com.cn/
Warranty Terms & Conditions
- Product component defects or damages resulting from manufacturing are covered. SilverStone Technology will fix or replace defects under the following conditions:
- Usage in accordance with the manual, without misuse or overuse.
- Damage not caused by natural disasters (e.g., thunder, fire, earthquake, flood, salt, wind, insects, animals).
- Product has not been disassembled, modified, or repaired by unauthorized parties. Components have not been disassembled or replaced.
- Warranty marks/stickers are intact.
- Loss or damages from conditions not listed above are not covered.
- Under warranty, SilverStone Technology's liability is limited to the product's current market value (depreciated value, excluding shipping/handling). SilverStone Technology is not responsible for other damages or losses associated with product use.
- SilverStone Technology is obligated to repair or replace defective products. SilverStone Technology is not liable for damages related to sale, purchase, or use, including data loss, business loss, profit loss, or incidental/consequential damages, even if advised of the possibility.
- Warranty is valid only for the original purchaser through authorized SilverStone distributors/resellers and is not transferable.
- Proof of purchase (sales receipt/invoice with purchase date) is required for warranty eligibility.
- If a problem occurs during the warranty period, contact your retailer, reseller, SilverStone authorized distributor, or SilverStone at www.silverstonetek.com.
- Customers must provide proof of original purchase.
- Customers bear the cost of shipping the product to SilverStone authorized distributors. Distributors will bear the cost of return shipping after service.
- A Return Merchandise Authorization (RMA) number from SilverStone is required before sending the product.
- Updated warranty information is available on SilverStone's official website: www.silverstonetek.com.
Additional Info & Contacts
For North America: usasupport@silverstonetek.com. SilverStone Technology in North America may repair or replace defective products with refurbished, functionally tested products. Replacement products are warranted for the remainder of the original warranty period or thirty days, whichever is longer. Products should be returned to the place of purchase within 30 days. After 30 days, customers must initiate an RMA procedure with SilverStone Technology in the USA by downloading the "USA RMA form for end-users" from http://silverstonetek.com/contactus.php and following instructions.
For Australia: support@silverstonetek.com. Australian Consumer Law guarantees apply. Customers are entitled to replacement or refund for major failures and compensation for foreseeable loss or damage. Goods can be repaired or replaced if they fail to be of acceptable quality and the failure is not major. Refer to "Warranty terms & conditions" for details.
SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. +886-2-8228-1238 (standard international call charges apply)
For Europe: support.eu@silverstonetek.de
For China: support@silverstonetek.com.cn
For all other regions: support@silverstonetek.com
Hazardous Substances Table
This table indicates the presence of hazardous substances/elements and their chemical content in accordance with SJ/T 11364.
| Component Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr(VI)) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Chassis (Metal) | ○ | ○ | ○ | ○ | ○ | ○ |
| Fan | ○ | ○ | ○ | ○ | ○ | ○ |
| Cables | ○ | ○ | ○ | ○ | ○ | ○ |
| Screws | ○ | ○ | ○ | ○ | ○ | ○ |
| Packaging Material | ○ | ○ | ○ | ○ | ○ | ○ |
○: Indicates that the content of the hazardous substance in all homogeneous materials of this component is within the limit specified by GB/T 26572.
X: Indicates that the content of the hazardous substance in at least one homogeneous material of this component exceeds the limit specified by GB/T 26572.
Inspector: 检01
Production Date: See product barcode
Product Certificate
SilverStone
