Helmets Save Lives!

Always wear a properly fitted helmet that complies with CPSC or CE safety standards when you ride your scooter.

Correct Fitting: Make sure your helmet covers your forehead.

Incorrect Fitting: Forehead is exposed and vulnerable to serious injury.

Important Warnings and Cautions

Read the User Manual Thoroughly

Thank you for purchasing the Hover-1 Dynamo. Please read all instructions carefully before using and retain this manual for future use and reference.

This manual applies to the Hover-1 Dynamo.

• In order to avoid dangers that are caused by collisions, falls, and loss of control, please learn how to ride the Dynamo safely.
• You can learn operating skills by reading the product manual and watching videos.
• This manual includes operating instructions and precautions. Users must read it carefully and follow the instructions.
• All users are responsible for any consequences caused by violating warning contents or prompt operations. Hover-1 cannot be held liable.

Attention: Charging and Operating Information

1. Use only the supplied charger with this scooter. Charger Manufacturer: Shenzhen Hyleton Technology Co.,Ltd. Model: HLT-180-4201500
2. The operating temperature range of the charger is 32°F - 77°F (0°C - 25°C).
3. The operating temperature range of the E-Scooter is 32°F - 104°F (0°C - 40°C).
4. Do not ride on icy or slippery surfaces.
5. Read the operation manual and warning labels before riding.
6. Store the Dynamo in a dry, ventilated environment.
7. When transporting the Dynamo, avoid violent crashes or impact.

Low Temperature Warning & Safety Instructions

Safety Instructions

• Keep the device away from heat sources, direct sunlight, humidity, water and any other liquids.
• Do not operate the device if it has been exposed to water, moisture or any other liquids to prevent against electric shock, explosion and/or injury to yourself and damage to the device.
• Do not use the device if it has been dropped or damaged in any way.
• Repairs to electrical equipment should only be performed by the manufacturer. Improper repair voids the warranty and may place the user at serious risk.
• Do not puncture or harm the exterior surface of the product in any way.
• Keep the device free from dust, lint, etc.
• Do not use this device for anything other than its intended use or purpose. Doing so may damage the device or lead to property damage, injury or death.
• This product is not a toy. Keep out of reach of children.
• Do not expose batteries, battery pack, or batteries installed to excessive heat, such as direct sunlight, or open flame.
• Do not allow hands, feet, hair, body parts, clothing or similar articles to come in contact with moving parts, wheels or drive-train, while the Dynamo is running.

Additional Safety Guidelines

• Do not operate, or allow others to operate, the Hover-1 Dynamo, until the user understands all instructions, warnings and safety features described in this manual.
• Check with your doctor if you have a medical condition that could affect your ability to use the Hover-1 Dynamo.
• Persons with head, back or neck ailments or prior surgeries to those areas of the body are not recommended to use this Hover-1 Dynamo.
• Do not operate if you are pregnant, have a heart condition, or have both.
• Persons with any mental or physical conditions that may make them susceptible to injury or impair their physical or mental capabilities to recognize, understand and perform all of the safety instructions and to be able to assume the hazards inherent in unit use, should not use the Hover-1 Dynamo.

Understanding Manual Symbols

? NOTES: In this manual, the symbol with the word “NOTES" indicates instructions or relevant facts the user should remember prior to using the device.

⚠️ CAUTION!: In this manual, the symbol with the word “CAUTION” indicates a hazardous situation which, if not avoided, can cause minor or moderate injury.

⚠️ WARNING!: In this manual, the symbol with the word “WARNING" indicates a hazardous situation which, if not avoided, can cause death or serious injury.

Serial Number

Please keep the serial number on file for warranty claims as well as proof of purchase.

Introduction to the Hover-1 Dynamo

This manual is designed to give you the information you need for the safe operation and maintenance of your new Dynamo scooter. Please read it thoroughly before riding your Dynamo.

The Dynamo is a personal transporter. Our technology and production processes are developed with strict testing for each Dynamo scooter. Operating the Dynamo without following the contents of this manual may lead to damage to your Dynamo scooter, or bodily injury.

Package Contents

• Hover-1 Dynamo Electric Folding Scooter
• Wall Charger
• Operation Manual

Your Hover-1 Dynamo's serial number is stamped on the kickstand side of the platform. Record the serial number in the designated area of the “WARRANTY” section of this manual in the event that your Hover-1 Dynamo is lost or stolen.

Safety Precautions

• The first rule in safe riding is to use common sense.
• Different localities and countries have different laws governing riding electric transportation devices on public roads.
• You should check with local officials to ensure you are complying with local traffic law requirements.
• Hover-1 is not liable for tickets or violations given to riders who do not follow local laws and regulations.
• For your safety, always wear a helmet that meets CPSC or CE safety standards. In the event of an accident, a helmet can protect you from serious injury and in some cases, even death.

Safe Riding Practices

• Obey all local traffic laws. Obey red and green lights, one-way streets, stop signs, pedestrian crosswalks, etc.
• Ride with the traffic, not against it.
• Ride defensively; expect the unexpected.
• Give pedestrians the right-of-way.
• Do not ride too close to pedestrians and alert them if you intend to pass them from behind.
• Slow down at all street intersections and look to the left and right before crossing.

Your Dynamo electric folding scooter is not equipped with reflectors. It is not recommended that you ride in conditions of low visibility.

If you are riding your scooter in low-visibility conditions, ensure your LED light is turned on, and that you are wearing bright, reflective clothing.

Think about safety when you ride. You can prevent many accidents if you think about safety. Below is a helpful checklist for riders.

Safety Checklist

• Do not ride above your skill level. Ensure you have had enough practice with all functions and features of your Dynamo.
• Do not ride too fast -- with increased speed comes increased risk. If you are moving at a higher speed, small bumps can turn into large impacts, leading to a higher risk of injury if an accident occurs.
• Do not ride with pets.
• Before stepping on your Dynamo, make sure it is placed flat on level ground and the power is on.

Further Riding Restrictions and Guidelines

• Do not try to open or modify your Dynamo scooter. Doing so voids the manufacturer warranty and may cause your Dynamo to fail, resulting in injury or death.
• Do not use the Dynamo in a manner that would put people or property in danger.
• If you and your friend(s) are riding Dynamo scooters together, be sure to keep a safe distance between each other to prevent collisions, property damage, serious injuries or even death.
• Be sure to keep your feet on the scooter at all times. Moving your feet off your scooter while driving is dangerous and may cause the scooter to stop or veer sideways.
• Do not operate the Dynamo while under the influence of drugs and/or alcohol.
• Do not operate the Dynamo when you are restless or sleepy.
• Use your best judgment to keep yourself out of dangerous situations with your Dynamo.
• Do not ride your Dynamo scooter off of curbs, ramps, or attempt to operate in a skate park, empty pool, or in any way similar to a skateboard. Misuse of your Dynamo voids the manufacturer warranty and may lead to injury or damage.
• Do not abuse your Dynamo; doing so can damage your unit and cause failure to the operating system which may lead to injury. Physical abuse, including dropping your Dynamo scooter, voids the manufacturer warranty.
• Do not operate in or near puddles of water, mud, sand, stones, gravel, debris or near rough and rugged terrain.
• The Dynamo can be used on paved surfaces that are flat and even. If you encounter uneven pavement, please lift your Dynamo scooter over and past the obstruction.
• Do not ride in inclement weather: snow, rain, hail, sleet, on icy roads or in extreme heat or cold.
• Bend your knees when riding on bumpy or uneven pavement to absorb the shock and vibration and help you keep your balance.
• If you are unsure if you can safely ride on a specific terrain, step off and carry your Dynamo. ALWAYS BE ON THE SIDE OF CAUTION.

Braking and Advanced Riding Precautions

• Do not attempt to ride over bumps or objects greater than 1/2 in. even when prepared and bending your knees.
• PAY ATTENTION - look at where you are riding and be conscious of the road conditions, people, places, property and objects around you.
• Do not operate the Dynamo scooter in crowded areas.
• Operate your Dynamo scooter with extreme caution when indoors, especially around people, property, and narrow spaces.
• Do not operate the Dynamo while talking, texting, or looking at your phone.
• Do not ride your Dynamo scooter where it is not permitted.
• Do not ride your Dynamo near motor vehicles or on public roads.
• Do not travel up or down steep hills.
• The Dynamo is intended for use by a single individual; DO NOT attempt to operate the Dynamo with two or more people.
• Do not carry anything while riding the Dynamo scooter.
• Individuals with lack of balance should not attempt to operate the Dynamo scooter.
• Pregnant women should not operate the Dynamo scooter.
• Young children and the elderly should not operate the Dynamo.
• At higher speeds, always take into consideration longer stopping distances.
• Do not attempt to jump on or off your Dynamo scooter.

Visibility and Risk Management

• Do not attempt any stunts or tricks with your Dynamo scooter.
• Do not ride the Dynamo in dark or poorly lit areas.
• Do not ride the Dynamo near or over potholes, cracks or uneven pavement or surfaces.
• Do not operate your Dynamo scooter off-road.
• Do not turn sharply, especially at high speeds.
• Do not exceed the maximum or minimum weight limits.
• Avoid driving the Dynamo in unsafe places, including near areas with flammable gas, steam, liquid, dust, fiber, which could cause fire and explosion accidents.
• Do not operate near swimming pools or other bodies of water.
• WARNING: Risk of Fire - No User Serviceable Parts.

Care and Maintenance

• Do not expose the device to liquid, moisture, or humidity to avoid damage to the product's internal circuitry.
• Do not use abrasive cleaning solvents to clean the device.
• Do not expose the device to extremely high or low temperatures as this will shorten the life of the electronic device, destroy the battery, and/or distort certain plastic parts.
• Do not dispose of the device in fire as it may explode or combust.
• Do not expose the device to contact with sharp objects as this will cause scratches and damage.
• Do not let the device fall from high places, as doing so may damage the internal circuitry.
• Do not attempt to disassemble the device.
• Use only the charger provided by Hover-1.

Battery Care and Maintenance

Battery Specifications

• Battery Type: Rechargeable lithium-ion battery
• Charge Time: Up to 4 hours
• Battery Voltage: 36V
• Battery Capacity: 5.0 Ah
• Working Temperature: -4°F - 104°F
• Charging Temperature: 32°F - 104°F
• Storage Time: 1 year
• Storage Temperature: -4°F - 104°F
• Storage Humidity: 5% - 95%

Battery Maintenance

The lithium-ion battery is built into the device. Do not disassemble the device to remove the battery or attempt to separate it from the device.

• When charging the device, please use the enclosed 1-pin charging cable or otherwise ensure that the battery charging conditions are met.
• Do not connect or attach the device or the battery to a power supply plug or directly to a car's cigarette lighter.
• Do not place the device or batteries near a fire, or into direct sunlight. Heating the device and/or the battery can cause additional heating, breaking, or ignition of the battery inside the device.
• Do not continue charging the battery if it does not recharge within the specified charging time. Doing so may cause the battery to become hot, rupture, or ignite.

To preserve natural resources, please recycle or dispose of batteries properly. This product contains lithium-ion batteries. Local, state, or federal laws may prohibit disposal of lithium-ion batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options.

Battery Safety Warnings

• Do not attempt to modify, change, or replace your battery.
• Do not use your device if the battery begins to emit odor, overheats, or begins to leak.
• Do not touch any leaking materials or breathe fumes emitted.
• Do not allow children and animals to touch the battery.
• The battery contains dangerous substances; do not open the battery, or insert anything into the battery.
• Please only use the charger provided by Hover-1.
• Do not attempt to charge the device if the battery has discharged or emits any substances. In that case, immediately distance yourself from the battery in case of fire or explosion.
• Lithium-ion batteries are considered to be hazardous materials. Please follow all local, state and federal laws in regards to recycling, handling and disposing of Lithium-ion batteries.

Specifications

Model: DSA-DMO-BF20

Net Weight: 30.86 lbs (14 kg)

Max Supported Weight: 264 lbs (120 kg)

Min Supported Weight: 44 lbs (20 kg)

Max Speed: Up to 16 mph (26 km/h)

Max Distance Range: Up to 9 miles (15 km)

Battery Type: Lithium-ion

Motor Power: 250W Brushless Motor

Battery Voltage: 36 V

Battery Capacity: 5.0 Ah

Power Requirement: AC 100-240V, 50/60 Hz

Folding Size: (43.2 in. x 15.9 in. x 16.5 in.) (109.8cm x 40.4 cm x 42 cm)

Open Size: (43.2 in. x 15.9 in. x 46.4 in.) (109.8 cm x 40.4cm x 118 cm)

Tire Type: 8.5" Front Pneumatic Tire, 8.5" Rear Pneumatic Tire

Brake Type: Electronic & Mechanical Brakes

Contact: (866) 831-1520

Parts List

• A. Scooter
• B. Handle Bars
• C. Wall Charger

Diagram Description: The parts list shows three items labeled A, B, and C. Item A is the main scooter body. Item B shows the handlebars. Item C shows the wall charger and cable.

Hover-1 Dynamo Diagram

Diagram Description: The diagram shows two views of the Hover-1 Dynamo scooter. The top view displays the handlebars with numbered components: 1. Handlebars (Left), 2. LCD Display, 3. Handlebars (Right), 4. Electric Brake lever, 5. Power/Function Button, 6. Throttle, 7. Release Lever. The bottom view shows the main scooter body with numbered components: 8. Aluminum Frame, 9. Mechanical Brake (rear wheel), 10. Kickstand, 11. Foot Pad, 12. Charging Port.

Features/Parts

• 1. Handlebars (Left)
• 2. LCD Display
• 3. Handlebars (Right)
• 4. Electric Brake
• 5. Power/Function Button
• 6. Throttle
• 7. Release Lever
• 8. Aluminum Frame
• 9. Mechanical Brake
• 10. Kickstand
• 11. Foot Pad
• 12. Charging Port

LCD Display Guide

Diagram Description: The diagram illustrates the LCD display of the Hover-1 Dynamo. It shows the display screen with various indicators and controls.

• LCD Display: Shows information about the scooter.
• Battery Life Indicator: Displays your current battery life.
• Speed Indicator: Displays your current speed in Mph.
• Speed Level Button (+): Used to increase top speed and acceleration. Options are 1 - Low, 2 - Medium, 3 - High.
• Power / Function Button: Press and hold for 2 seconds to Power ON or Power OFF the scooter. Pressing briefly cycles through voltage, current trip distance, voltage, current trip time, and revolutions per minute.
• Speed Level Button (-): Used to decrease top speed and acceleration. Options are 1 - Low, 2 - Medium, 3 - High.
• Information Panel: Displays total mileage, current trip distance, voltage, and current trip time.
• Speed Level Indicator: Displays your current speed level.

Charging Your Dynamo

Charging the Device

• Ensure that the charging port is clean and dry.
• Make sure that there is no dust, debris or dirt inside the port.
• Plug the charger into a grounded wall outlet.
• Connect the cable with the power supply (100V ~ 240V; 50/60 Hz).
• Align and connect the 1-pin charging cable into the charging port of the Dynamo Scooter. (DO NOT FORCE OR BEND THE CHARGING CABLE AS IT MAY CAUSE THE PRONGS TO BEND OR BREAK.)
• The charging indicator light on the charger itself should change to RED, indicating that your device is now being charged.
• When the RED indicator light on your charger turns to GREEN, then your device is fully charged.
• After fully charging your Dynamo Scooter, unplug the charger from your device and from the power outlet.

Preparing Your Scooter

Attaching the Handlebars

Attach the handle bars by placing them into the appropriate sockets and twisting them in the correct direction (counter-clockwise to secure).

Diagram Description: Shows the handlebar stem with the display and brake levers. Arrows indicate twisting the handlebars counter-clockwise into the stem to attach them.

Pinch Points

Some parts of your Hover-1 Dynamo can injure you if mishandled. Moving and folding parts can cut skin. Clamps and pivoting parts such as brake levers can pinch. When folding and unfolding your Hover-1 Dynamo, please watch for pinch points where possible injury may be sustained. Do not leave your hand in these areas during folding or unfolding.

Diagram Description: Shows the scooter with yellow warning symbols (!) placed on potential pinch point areas: near the folding mechanism of the handlebars, near the main folding hinge, and near the rear fender/wheel area.

Folding & Unfolding and Operation

Folding & Unfolding Your Dynamo Scooter

To fold your Dynamo, twist the center of the release lever and pull the lever. Lower the steering column into the folded position. Press the folding clip into the top of the foot brake until you hear a click. Press the foot brake to release the folding hinge. Always make sure the lever is secure before riding your Dynamo scooter.

Diagram Description: Illustrates the folding process. One image shows twisting the release lever center to lock or unlock. Another shows pulling the release lever away from the steering column. A third shows the steering column being lowered or raised.

Speed Modes

To change speed modes, ensure the scooter is powered on. Press the speed level up and down buttons until you are in the desired speed mode:

• 1 - Top Speed 7mph
• 2 - Top Speed 10mph
• 3 - Top Speed 16mph

Kick to Start

For safety reasons, the scooter will not accelerate unless it is already moving at least 3km/h (1.8mph). You must first kick off the ground and then press the throttle in order to ride the scooter.

Before Riding

It is important that you fully understand all elements of your Dynamo scooter. If these elements are not used correctly, you will not have full control of your Dynamo. Before you ride, learn the functions of the various mechanisms on your scooter.

Practice using these elements of your Dynamo at slower speeds in a flat, open area before taking the device out in public areas.

Pre-Ride Checklist

Ensure that your Dynamo is in proper working order each and every time you ride. If a part of the Dynamo scooter does not function correctly, please contact the Customer Support Center.

• Ensure the battery is fully charged before riding your scooter.
• If the Dynamo scooter is not used for an extended period of time, you may need to recharge the battery every 2 months to maintain the battery life.
• Please wear all appropriate safety and protective gear as previously mentioned in the User Manual before operating your device.
• Make sure to wear comfortable clothes and flat closed-toe shoes when operating your device.
• Please carefully read the Operation Manual, which will assist in explaining the basic working principles and provide tips on how to best enjoy your experience.

Riding Your Dynamo Scooter

Operating Your Device

Make sure the device is fully charged before the first initial use. Before turning on your Dynamo scooter, ride it like a normal kick scooter to get comfortable with the device before using it with the motor.

When comfortable riding the scooter, power it on. For the motor to activate, you must first start riding the scooter and then push the throttle down with your thumb.

To slow down the scooter, push the electric brake down. This will stop the motor and slow you down. Also press the mechanical brake with your foot to manually slow down the scooter.

To turn, use the handlebar to turn in the direction you wish to turn.

The Dynamo scooter can be operated manually if you do not wish to use the motor.

As you get comfortable on the device, you will notice it becomes easier to maneuver. Remember at higher speeds, it is necessary to shift your weight to overcome the centrifugal force.

Prepare to brace yourself if you encounter bumps or uneven surfaces, then dismount and carry your Dynamo to a safe operating surface.

Weight and Speed Limitations & Operating Range

Weight and Speed Limitations

Speed and weight limits are set for your own safety. Please do not exceed the limits listed in the “Specifications" section of this manual.

Operating Range

The following are some of the major factors that will affect the operating range of your device:

• Terrain: Riding distance is highest when riding on a smooth, flat surface. Riding uphill and/or on rough terrain will reduce distance significantly.
• Weight: A lighter user will have further range than a heavier user.
• Ambient temperature: Please ride and store the device under recommended temperatures, which will increase driving distance, battery life, and overall performance of your device.
• Speed and Riding Style: Maintaining a moderate and consistent speed while riding produces maximum distance. Traveling at high speeds for extended periods, frequent starts and stops, idling, and frequent acceleration or deceleration will decrease overall distance.

*Do not attempt to stop suddenly as this may lead to injury or damage to your brake discs.

Safety Alerts and FCC Statement

Please follow all local, state and federal laws in regards to recycling, handling and disposing of Lithium-ion Battery.

Safety Alerts

While riding your Dynamo Scooter, if there is a system error or illegal operation performed, the device will prompt the user in a variety of ways. The following are common occurrences where you will see Safety Alerts. These notices should not be ignored, but appropriate action should be taken to correct any illegal operation, failure or errors.

• Prohibited riding surfaces (uneven, too steep, unsafe, etc.)
• Battery voltage is too low.
• The device is still charging.
• Overheating, or motor temperature is too high.
• When the battery is about to run out of power, the battery icon will flash.
• If any or both tires are blocked, the device will stop after 10 seconds.
• When the battery level has depleted below protection mode, the device motor will power off after 15 seconds.

While sustaining a high discharge current during use (such as riding up a steep slope for a long period of time), the device motor will power off after 15 seconds.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Instructions for a Class B Digital Device or Peripheral

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Connect and Learn More

Follow Hover-1 on social media:

• Facebook: @RideHover1
• Instagram: @RideHover1
• Twitter: @RideHover1

Customer Support: (866) 831-1520

Website: www.Hover-1.com

Warranty Information

For warranty information, please visit us at: www.hover-1.com

Manufacturer: DGL Group, Ltd.

Address: 195 Raritan Center Parkway Edison, NJ 08837

Please affix your serial number label here: [Serial Number Label Area]