Hover-1 Gambit Electric Folding Scooter Operation Manual

Introduction

This manual provides essential information for the safe operation and maintenance of the Hover-1 Gambit Electric Folding Scooter. It is crucial to read this manual thoroughly before riding to prevent injury or damage.

This manual applies specifically to the Hover-1 Gambit. To avoid dangers from collisions, falls, and loss of control, users must learn to ride the Gambit safely by reading this manual and watching relevant videos. All users are responsible for consequences resulting from violating warning contents or prompt operations; Hover-1 cannot be held liable.

Attention

1. Use only the supplied charger: SHENZHEN HYLETON TECHNOLOGY Co., LTD, Model: HLT-118C-4201000.
2. Charger operating temperature range: -4°F to 140°F (-20°C to 60°C).
3. E-Scooter operating temperature range: 32°F to 104°F (0°C to 40°C).
4. Do not ride on icy or slippery surfaces.
5. Read the operation manual and warning labels before riding.
6. Store the Gambit in a dry, ventilated environment.
7. When transporting, avoid violent crashes or impact.

Safety Instructions

• Keep the device away from heat sources, direct sunlight, humidity, water, and other liquids.
• Do not operate if exposed to water, moisture, or other liquids to prevent electric shock, explosion, injury, or device damage.
• Do not use if dropped or damaged.
• Repairs to electrical equipment should only be performed by the manufacturer; improper repair voids the warranty and poses serious risk.
• Do not puncture or harm the exterior surface.
• Keep free from dust, lint, etc.
• Do not use for anything other than its intended purpose; misuse may cause damage, injury, or death.
• This product is not a toy. Keep out of reach of children.
• Do not expose batteries, battery pack, or installed batteries to excessive heat (direct sunlight, open flame).
• Do not allow hands, feet, hair, body parts, clothing, or similar articles to contact moving parts, wheels, or drive-train while running.
• Do not operate, or allow others to operate, until all instructions, warnings, and safety features are understood.
• Consult a doctor if you have a medical condition that could affect your ability to use the Gambit.
• Persons with head, back, or neck ailments or prior surgeries to those areas are not recommended to use this device.
• Do not operate if pregnant, have a heart condition, or both.
• Persons with mental or physical conditions that may make them susceptible to injury or impair their capabilities to recognize, understand, and perform safety instructions should not use the Gambit.

Notes:

A symbol with the word “NOTES” indicates instructions or relevant facts to remember before using the device.Serial Number

Keep the serial number on file for warranty claims and proof of purchase.

Safety Precautions

The first rule in safe riding is to use common sense. Be aware of local laws and regulations regarding electric transportation devices on public roads. Hover-1 is not liable for tickets or violations due to non-compliance with local laws. Always wear a helmet that meets CPSC or CE safety standards for protection against serious injury or death.

• Obey all local traffic laws: red and green lights, one-way streets, stop signs, pedestrian crosswalks.
• Ride with traffic, not against it.
• Ride defensively; expect the unexpected.
• Give pedestrians the right-of-way.
• Do not ride too close to pedestrians; alert them if passing from behind.
• Slow down at street intersections and look left and right before crossing.

The Gambit is not equipped with reflectors. Riding in low visibility is not recommended. If riding in low-visibility conditions (fog, dusk, night), ensure the LED light is on and wear bright, reflective clothing to increase safety and avoid collisions.Safety Checklist

• Do not ride above your skill level. Practice all functions and features.
• Do not ride too fast; increased speed brings increased risk. Small bumps can cause large impacts at higher speeds.
• Do not ride with pets.
• Before stepping on, ensure the Gambit is flat on level ground and powered on.
• Do not open or modify the scooter; this voids the warranty and may cause failure, injury, or death.
• Do not use in a manner that endangers people or property.
• Maintain a safe distance from other riders to prevent collisions or injuries.
• Keep feet on the scooter at all times; moving feet off is dangerous and can cause veering or stopping.
• Do not operate under the influence of drugs or alcohol.
• Do not operate when restless or sleepy.
• Use best judgment to avoid dangerous situations.
• Do not ride off curbs, ramps, or in skate parks/empty pools; misuse voids warranty and may lead to injury.
• Do not abuse the Gambit; physical abuse (e.g., dropping) voids warranty and can cause system failure leading to injury.
• Do not operate in or near puddles, mud, sand, stones, gravel, debris, or rough/rugged terrain.
• Use on flat, even paved surfaces. Lift the scooter over uneven pavement or obstructions.
• Do not ride in inclement weather: snow, rain, hail, sleet, icy roads, or extreme heat/cold.
• Bend knees on bumpy/uneven pavement to absorb shock and maintain balance.
• If unsure about safe riding on specific terrain, step off and carry the Gambit.

• Do not attempt to ride over bumps or objects greater than ½ inch, even with bent knees.
• Pay attention to road conditions, people, places, property, and objects around you.
• Do not operate in crowded areas.
• Operate with extreme caution indoors, especially around people, property, and narrow spaces.
• Do not operate while talking, texting, or using your phone.
• Do not ride where prohibited.
• Do not ride near motor vehicles or on public roads.
• Do not travel up or down steep hills.
• The Gambit is for single individual use only. Do not attempt to operate with two or more people.
• Do not carry anything while riding.
• Individuals with lack of balance should not attempt to operate.
• Pregnant women should not operate.
• Young children and the elderly should not operate.
• At higher speeds, consider longer stopping distances.
• Do not attempt to jump on or off.

Care & Maintenance

• Do not expose the device to liquid, moisture, or humidity to avoid damage to internal circuitry.
• Do not use abrasive cleaning solvents.
• Do not expose to extremely high or low temperatures; this shortens electronic device life, destroys battery, and/or distorts plastic parts.
• Do not dispose of in fire; it may explode or combust.
• Do not expose to sharp objects; this causes scratches and damage.
• Do not let fall from high places; this may damage internal circuitry.
• Do not attempt to disassemble.
• Use only the charger provided by Hover-1.

Battery Care / Maintenance

Battery Specifications

Battery Maintenance

The lithium-ion battery is built into the device. Do not disassemble or attempt to separate it. When charging, use the enclosed 1-pin charging cable and ensure charging conditions are met. Do not connect to a power supply plug or car's cigarette lighter. Do not place near fire or direct sunlight; heating can cause additional heating, breaking, or ignition. Do not continue charging if it doesn't recharge within the specified time; this may cause it to become hot, rupture, or ignite.

To preserve natural resources, recycle or dispose of batteries properly. This product contains lithium-ion batteries. Local, state, or federal laws may prohibit disposal in ordinary trash. Consult your local waste authority for recycling/disposal options.

• Do not modify, change, or replace your battery.
• Do not use if the battery emits odor, overheats, or leaks.
• Do not touch leaking materials or breathe fumes.
• Do not allow children and animals to touch the battery.
• The battery contains dangerous substances; do not open or insert anything into it.
• Only use the charger provided by Hover-1.
• Do not charge if the battery has discharged or emits substances. Immediately distance yourself in case of fire or explosion.
• Lithium-ion batteries are hazardous materials. Follow all local, state, and federal laws for recycling, handling, and disposing.

Preparing Your Scooter

Attaching the Handlebars

Attach the handlebars by placing them into the appropriate sockets and twisting them in the correct direction. The left handlebar twists counter-clockwise, and the right handlebar twists clockwise. If the handlebars do not attach flush to the frame, you may need to shift the location of your throttle and brake assembly. Tighten or loosen with the included hex key, ensuring they are NOT touching or blocking your handlebars.

Pinch Points

Some parts of your Hover-1 Gambit can cause injury if mishandled. Moving and folding parts can cut skin. Clamps and pivoting parts, such as brake levers, can pinch. When folding and unfolding your Hover-1 Gambit, watch for pinch points where possible injury may be sustained. Do not leave your hand in these areas.

Folding & Unfolding Your Gambit Scooter

To fold your Gambit, press down on the rear wheel fender and pull the steering column up. Raise the release lever up and push it into place to secure the steering column, then twist the black piece in the center to lock it. Ensure the steering column is secured in place before riding.

Riding Your Gambit Scooter

It is important to fully understand all elements of your Gambit scooter. Incorrect use leads to loss of control. Learn the functions of mechanisms before riding. Practice at slower speeds in a flat, open area before public use.

Pre-Ride Checklist

Ensure your Gambit is in proper working order before every ride. If a part malfunctions, contact Customer Support. Ensure the battery is fully charged. If unused for extended periods, recharge every 2 months to maintain battery life. Wear appropriate safety and protective gear. Wear comfortable clothes and flat closed-toe shoes. Read the Operation Manual for basic working principles and tips.

Operating Your Device

Ensure the device is fully charged before first use. Before turning on the motor, ride it like a normal kick scooter to get comfortable. To activate the motor, start riding and then push the throttle down with your thumb. To slow down, push the electric brake down to stop the motor and slow you. Also, press the mechanical brake with your foot. To turn, use the handlebar. The scooter can be operated manually without the motor. As you get comfortable, maneuvering becomes easier. At higher speeds, shift weight to overcome centrifugal force. Brace for bumps or uneven surfaces; dismount and carry to a safe surface if encountered.

Weight and Speed Limitations

Speed and weight limits are set for safety. Do not exceed limits listed in the "Specifications" section.

Operating Range

Factors affecting operating range:

• Terrain: Riding distance is highest on smooth, flat surfaces. Uphill or rough terrain significantly reduces distance.
• Weight: Lighter users have further range.
• Ambient Temperature: Ride and store under recommended temperatures for increased driving distance, battery life, and overall performance.
• Speed and Riding Style: Moderate, consistent speed maximizes distance. High speeds, frequent starts/stops, idling, and frequent acceleration/deceleration decrease distance.

Do not attempt to stop suddenly as this may lead to injury or damage to brake discs.

Safety Alerts

If a system error or illegal operation occurs while riding, the device will prompt the user. These notices should not be ignored; take appropriate action to correct the issue.

Common Safety Alerts:

• Prohibited riding surfaces (uneven, too steep, unsafe).
• Battery voltage too low.
• Device is still charging.
• Overheating, or motor temperature too high.
• Battery icon flashes when power is low.
• Device stops after 10 seconds if tires are blocked.
• Motor powers off after 15 seconds if battery level depletes below protection mode.

If sustaining a high discharge current (e.g., riding up a steep slope for a long time), the motor will power off after 15 seconds.

Specifications

Parts List

The Hover-1 Gambit includes:

1. Scooter (main body)
2. Handle Bars (left and right)
3. Wall Charger
4. Allen Wrench

Hover-1 Gambit Diagram & LCD Display

The scooter features include:

• Left Handlebar
• LCD Display: Shows current speed in Mph (Speedometer) and current battery life (Battery Indicator).
• Right Handlebar
• Electric Brake
• Power/Function Button
• Throttle
• Release Lever
• Aluminum Frame
• Mechanical Brake
• Kickstand
• Foot Pad
• Charging Port

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

FCC Instructions for a Class B Digital Device or Peripheral

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warranty

For warranty information, visit www.hover-1.com.

Manufacturer: DGL Group, Ltd., 195 Raritan Center Parkway Edison, NJ 08837.

Users should affix their serial number label in the designated area for warranty claims and proof of purchase.