Hover-1 Dynamo Electric Folding Scooter

Introduction

This manual provides essential information for the safe operation and maintenance of your Hover-1 Dynamo electric folding scooter. Please read it thoroughly before riding.

The Dynamo is a personal transporter. Its technology and production processes are developed with strict testing. Operating the Dynamo without following the contents of this manual may lead to damage to your scooter or bodily injury.

Package Contents:

• Hover-1 Dynamo Electric Folding Scooter
• Wall Charger
• Operation Manual

Your Hover-1 Dynamo's serial number is stamped on the kickstand side of the platform. Record the serial number in the designated area of the "WARRANTY" section for safekeeping.

Safety Guidelines

Helmet Safety: Always wear a properly fitted helmet that complies with CPSC or CE safety standards when you ride your scooter.

• Correct Fitting: Make sure your helmet covers your forehead.
• Incorrect Fitting: Forehead is exposed and vulnerable to serious injury.

Understanding Safety Symbols:

• ⚠️ WARNING! Indicates a hazardous situation which, if not avoided, can cause death or serious injury.
• ? CAUTION! Indicates a hazardous situation which, if not avoided, can cause minor or moderate injury.
• ? NOTES: Indicates instructions or relevant facts the user should remember prior to using the device.

General Warnings & Precautions:

• Wear and Tear: As with all mechanical components, the Hover-1 Dynamo is subjected to wear and high stresses. If a component's design life is exceeded, it may fail suddenly, causing injury. Cracks, scratches, or color changes in stressed areas indicate the component needs replacement. Do not ride abusively.
• Folding & Unfolding: Great care should be taken when folding or unfolding. Ensure all releases are securely locked before riding. Visit www.Hover-1.com if unsure about lever operation.
• User Responsibility: Users are responsible for consequences caused by violating warning contents or prompt operations. Hover-1 cannot be held liable.
• Environmental Exposure: Keep the device away from heat sources, direct sunlight, humidity, water, and other liquids. Prolonged exposure to UV rays, rain, and elements may damage enclosure materials. Store indoors. Avoid extreme temperatures.
• Device Condition: Do not operate if the device has been dropped or damaged. Repairs should only be performed by the manufacturer. Do not puncture or harm the exterior. Keep free from dust, lint, etc.
• Intended Use: Do not use the device for anything other than its intended purpose. This product is not a toy; keep out of reach of children.
• Battery Safety: Do not expose batteries to excessive heat (sunlight, open flame). Do not dispose of the device in fire. Do not allow children and animals to touch the battery. The battery contains dangerous substances; do not open it. Seek immediate medical assistance if exposed to any substance emitted from the battery.
• Moving Parts: Do not allow hands, feet, hair, body parts, or clothing to contact moving parts, wheels, or drive-train while the Dynamo is running.
• User Conditions: Consult a doctor if you have a medical condition that could affect your ability to use the scooter. Persons with head, back, or neck ailments, or prior surgeries to those areas, are not recommended to use this scooter. Do not operate if pregnant, have a heart condition, or have both. Individuals with mental or physical conditions that impair their ability to understand safety instructions should not use the Dynamo.
• Riding Environment: Do not ride on icy or slippery surfaces. Avoid puddles, mud, sand, stones, gravel, debris, or rough/rugged terrain. Use on paved, flat, and even surfaces. Lift over obstructions. Do not ride in inclement weather (snow, rain, hail, sleet, extreme heat/cold). Avoid roadways, motor vehicles, steep inclines, steps, and swimming pools or other bodies of water. Always wear shoes.
• Riding Practices: Obey all local traffic laws. Ride with traffic, not against it. Ride defensively. Give pedestrians the right-of-way. Do not ride too close to pedestrians; alert them before passing. Slow down at intersections and look both ways. Do not ride above your skill level. Do not ride too fast. Do not ride with pets. Ensure the scooter is on level ground with power on before stepping on. Do not try to open or modify the scooter; this voids the warranty. Do not endanger people or property. Maintain safe distance between riders. Keep feet on the scooter at all times. Do not operate under the influence of drugs/alcohol. Do not operate when restless or sleepy. Use good judgment to avoid dangerous situations. Do not ride off curbs, ramps, or in skate parks/empty pools. Do not abuse the unit; this voids the warranty. Bend knees on bumpy surfaces. Step off if unsure about terrain.
• Braking: Proper brake use is vital. Apply brakes gradually; do not use sudden or excessive force. Give yourself enough room to stop safely.
• Prohibited Actions: Do not attempt stunts or tricks. Do not ride in dark or poorly lit areas. Do not ride over potholes, cracks, or uneven pavement. Do not operate off-road. Do not turn sharply at high speeds. Do not exceed weight limits. Avoid unsafe places (e.g., near flammable gas, steam, liquid, dust, fiber). Do not operate near swimming pools or bodies of water. Do not attempt to jump on or off.
• Rider Limits: The Dynamo is intended for use by a single individual; do not operate with two or more people. Do not carry anything while riding. Individuals with lack of balance, pregnant women, young children, and the elderly should not operate the Dynamo.
• Low Visibility: The scooter is not equipped with reflectors. Ride in low-visibility conditions (fog, dusk, night) only if your LED light is on and you wear bright, reflective clothing. You may be difficult to see, leading to a collision.
• Overweight Exertion: Overweight exertion may increase the possibility of injury or product damage.
• Adult Supervision: Required for reducing injury risk.

Operation and Preparation

Preparing Your Scooter:

• Attaching Handlebars: Place handlebars into appropriate sockets and twist in the correct direction (counter-clockwise to loosen, clockwise to tighten). Note: If handlebars don't attach flush, adjust throttle and brake assembly location using the included hex key. Ensure they are not touching or blocking handlebars.
• Pinch Points: Be aware of pinch points on moving and folding parts (e.g., clamps, brake levers) which can cut or pinch skin during folding or unfolding. Keep hands clear.
• Folding & Unfolding: To fold, twist the center of the release lever, pull the lever, and lower the steering column. Press the folding clip into the foot brake until it clicks. Press the foot brake to release the folding hinge. Always ensure the lever is secure before riding.

Charging Your Dynamo:

• Ensure the charging port is clean and dry, with no dust or debris.
• Plug the charger into a grounded wall outlet (100V ~ 240V; 50/60 Hz).
• Align and connect the 1-pin charging cable to the port. DO NOT FORCE OR BEND THE CHARGING CABLE.
• The charging indicator light on the charger turns RED when charging and GREEN when fully charged.
• Unplug the charger after fully charging.

Before Riding:

• Ensure the device is fully charged before first use.
• Practice riding like a normal kick scooter to get comfortable with the device before using the motor.
• Understand all controls and functions. Practice in a flat, open area at slower speeds.
• Ensure the Dynamo is in proper working order each time you ride. If a part malfunctions, contact Customer Support.
• If the scooter is not used for an extended period, recharge the battery every 2 months to maintain battery life.
• Wear appropriate safety and protective gear.
• Wear comfortable clothes and flat, closed-toe shoes.

Speed Modes:

To change speed modes, ensure the scooter is powered on. Press the speed level up/down buttons:

• 1 - Top Speed 10mph
• 2 - Top Speed 15mph
• 3 - Top Speed 25mph

Kick to Start:

For safety, the scooter will not accelerate unless it is already moving at least 3km/h (1.8mph). You must kick off the ground and then press the throttle to ride.

Riding and Performance

Operating Your Device:

• Ensure the device is fully charged before the first initial use.
• Before turning on the motor, ride it like a normal kick scooter to get comfortable.
• When comfortable, power it on. For the motor to activate, start riding and then push the throttle down with your thumb.
• To slow down, push the electric brake down (this stops the motor) and/or press the mechanical brake with your foot.
• Use the handlebar to turn in the desired direction.
• The scooter can be operated manually if the motor is not used.
• As you gain comfort, maneuverability will improve. At higher speeds, shift your weight to overcome centrifugal force.
• Brace yourself for bumps or uneven surfaces, or dismount and carry the Dynamo to a safe operating surface.
• ⚠️ WARNING: Do not turn sharply or at high speeds to avoid danger. Do not turn or ride quickly along slopes, as it may cause injury.

Weight and Speed Limitations:

Speed and weight limits are set for your safety. Please do not exceed the limits listed in the "Specifications" section.

Operating Range:

Factors affecting operating range include:

• Terrain: Riding distance is highest on smooth, flat surfaces. Uphill or rough terrain significantly reduces distance.
• Weight: A lighter user has a longer range than a heavier user.
• Ambient Temperature: Ride and store the device under recommended temperatures for increased driving distance, battery life, and performance.
• Speed and Riding Style: Moderate, consistent speed maximizes distance. High speeds, frequent starts/stops, idling, and frequent acceleration/deceleration decrease overall distance.

Safety Alerts:

If there is a system error or illegal operation, the device will prompt the user. Common alerts include:

• Prohibited riding surfaces (uneven, too steep, unsafe, etc.)
• Battery voltage is too low.
• The device is still charging.
• Overheating, or motor temperature is too high.
• Battery icon will flash when power is low.
• If tires are blocked, the device will stop after 10 seconds.
• If the battery level depletes below protection mode, the motor will power off after 15 seconds.
• While sustaining high discharge current (e.g., steep slope), the motor will power off after 15 seconds.

Care and Maintenance

General Care:

• Do not expose the device to liquid, moisture, or humidity to avoid damage to internal circuitry.
• Do not use abrasive cleaning solvents.
• Do not expose to extremely high or low temperatures, as this will shorten the life of the device, damage the battery, and/or distort plastic parts.
• Do not dispose of the device in fire; it may explode or combust.
• Do not expose the device to contact with sharp objects, as this will cause scratches and damage.
• Do not let the device fall from high places, as this may damage internal circuitry.
• Do not attempt to disassemble the device.
• Use only the charger provided by Hover-1.
• ⚠️ WARNING: Avoid using water or other liquids for cleaning. If water or other liquids enter the Dynamo, it will cause permanent damage to internal components.
• ⚠️ WARNING: Users who disassemble the Dynamo scooter without permission will void the warranty.

Battery Care / Maintenance:

• The lithium-ion battery is built into the device; do not disassemble to remove or separate it.
• When charging, use the enclosed 1-pin charging cable or ensure charging conditions are met.
• Do not connect the device or battery to a power supply plug or car's cigarette lighter.
• Do not place the device or batteries near fire or direct sunlight. Heating can cause ignition.
• Do not continue charging if it does not recharge within the specified time; this may cause the battery to become hot, rupture, or ignite.
• Do not attempt to modify, change, or replace your battery.
• Do not use the device if the battery emits odor, overheats, or leaks.
• Do not touch leaking materials or breathe emitted fumes.
• ⚠️ WARNING: Lithium-ion batteries are considered hazardous materials. Please follow all local, state, and federal laws regarding recycling, handling, and disposal. Consult your local waste authority for information on recycling and disposal options.

Specifications and Parts

Specifications:

• Model: H1-DMO
• Net Weight: 25.26 lbs (11.46 kg)
• Max Supported Weight: 264 lbs (120 kg)
• Min Supported Weight: 44 lbs (20 kg)
• Max Speed: Up to 16 mph (26 km/h)
• Max Distance Range: Up to 9 miles (15 km)
• Battery Type: Lithium-ion
• Motor Power: 250W Brushless Motor
• Battery Voltage: 36V
• Battery Capacity: 5.0 Ah
• Power Requirement: AC 100-240V, 50/60 Hz
• Folding Size: (43.2 in. x 15.9 in. x 16.5 in.) (109.8cm x 40.4 cm x 42 cm)
• Open Size: (43.2 in. x 15.9 in. x 46.4 in.) (109.8 cm x 40.4cm x 118 cm)
• Tire Type: 8.5" Front Pneumatic Tire, 8.8" Rear Solid Tire
• Brake Type: Electronic & Mechanical Brakes

Parts List:

• A. Scooter
• B. Handle Bars
• C. Wall Charger
• D. Allen Wrench

Hover-1 Dynamo Diagram:

The diagram shows the main components of the scooter:

• 1. Handlebars (Left)
• 2. LCD Display
• 3. Handlebars (Right)
• 4. Electric Brake Lever
• 5. Power/Function Button
• 6. Throttle
• 7. Release Lever
• 8. Aluminum Frame
• 9. Mechanical Brake (Foot Brake)
• 10. Kickstand
• 11. Foot Pad
• 12. Charging Port

LCD Display Explained:

The LCD display shows:

• Battery Life Indicator: Displays current battery level.
• Speed Indicator: Displays current speed in Mph.
• Information Panel: Displays total mileage, current trip distance, voltage, and current trip time.
• Speed Level Indicator: Displays your current speed level.
• Speed Level Button (+): Press to increase top speed and acceleration (1-Low, 2-Medium, 3-High).
• Speed Level Button (-): Press to decrease top speed and acceleration (1-Low, 2-Medium, 3-High).
• Power / Function Button: Press and hold for 2 seconds to Power ON/OFF the scooter. Press to cycle through total mileage, current trip distance, voltage, and current trip time.

Technical Information

FCC Statement:

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Contact and Warranty

For warranty information, please visit: www.Hover-1.com

Manufacturer: DGL Group, Ltd.
195 Raritan Center Parkway
Edison, NJ 08837

Customer Support: ? (866) 831-1520

Follow us:

• ? @RideHover1
• ? @RideHover1
• ? @RideHover1

Website: ? www.Hover-1.com

Affix Serial Number Label Here: [Space for Serial Number Label]