References
This manual corresponds to the following references:
- CL1007* Metal - blue core
- CL1008* Metal - black core
- CL2007* Fiber - blue core
- CL2008* Fiber - black core
*each ref. incl. 2 brushes
Packing List
The following items are included:
- Brushes for Automatic Tip Cleaner: 2 units (according to purchased reference)
- Manual: 1 unit (Ref. 0021174)
Features
All brushes are offered with black and blue core, to distinguish them when doing lead-free and leaded soldering. Fiber brushes have a longer lifespan than metal brushes.*
| CL1008 | CL1007 | CL2008 | CL2007 | |
|---|---|---|---|---|
| Material | Metal | Metal | Fiber | Fiber |
| Cleaning | Intensive | Intensive | Gentle | Gentle |
| Max. time use | 10 s | 10 s | 5 s | 5 s |
| Recommended time use | 1-2 s | 1-2 s | 1-2 s | 1-2 s |
| Life cycle | Long | Long | Extended* | Extended* |
| Core | Black | Blue | Black | Blue |
⚠️ *Only use the non-metal brushes when they are rotating. Incorrect use will damage them.
Changing Brushes
Before opening the tip cleaner, unplug it from the mains.
For CLR
Open the side closures and remove the splashguard.
The CLR splashguard also works as a tin collector.
For CLU
Pull the locking tab to open the splashguard.
CLU features a solder collection tray.
Removing Brushes
Press the brush buttons (1) to remove the brushes (2).
Installing Brushes
Align the brush with the axis and push them in until a click is heard. Check if the brush is properly fixed.
Cleaning
Clean the splashguard/solder collection tray, place them back in its position and close the cleaner.
Brushes (both, metal and fiber) can be cleaned by immersing them in isopropyl alcohol. They must be allowed to dry before use.
Specifications
CL1007 / CL1008 / CL2007 / CL2008 Metal and Fiber Brushes for Automatic Tip Cleaner
References:
- Ref. CL1007 Metal - blue core
- Ref. CL1008 Metal - black core
- Ref. CL2007 Fiber - blue core
- Ref. CL2008 Fiber - black core
Brush Dimensions: 50 x 50 x 52 mm / 1.97 x 1.97 x 2.05 in
CL1007 / CL1008 Metal
- Total Net Weight: 102 g / 0.22 lb
- Package Dimensions/Weight (L x W x H): 140 x 80 x 65 mm / 156 g (5.51 x 3.15 x 2.56 in / 0.34 lb)
CL2007 / CL2008 Fiber
- Total Net Weight: 44 g / 0.1 lb
- Package Dimensions/Weight (L x W x H): 140 x 80 x 65 mm / 100 g (5.51 x 3.15 x 2.56 in / 0.22 lb)
Warranty
JBC's 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.
Disposal
This product should not be thrown in the garbage. In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must be collected and returned to an authorized recycling facility. [crossed-out bin symbol]
CE EAC
www.jbctools.com
Soldering and Rework equipment for electronics | JBC Soldering
