Aldes GALVA RANGE - RPC REDUCER GALVA - D400/160
Airflow control
Product Overview
The Aldes RPC Reducer Galva D400/160 is a concentric flat reducer designed for connecting two galvanized ducts of different diameters over a minimum length. It is part of the Aldes GALVA RANGE for rigid galvanized ductwork, Aluminium, and Special applications.
Product Description: This reducer connects two galvanized ducts of different diameters. For air supply applications, a conical reducer is recommended to minimize pressure losses.
Fields of Application
- Multi-occupancy residential housing
- New construction
- Refurbishment projects
- Non-residential buildings
Installation
- Features easy assembly of interlocking accessories: ducts are female, accessories are male.
- A final seal can be achieved using sealant and/or a perforated strip.
- Attachment to the duct is done using self-tapping screws (number varies from 4 to 6 depending on diameter).
Reference Arguments
- Application: Concentric flat reducer used to connect a duct diameter of 400 mm to a duct diameter of 160 mm over a minimum length.
- Note: Not recommended for use on supply ducts due to potential high pressure losses.
Description
- Concentric flat reducer made of galvanized steel with diameters of 400/160 mm.
Main Characteristics
- Available in diameters ranging from 80 mm to 630 mm.
- Constructed from galvanized steel conforming to EN 10346, ensuring coating uniformity.
- Possesses MO fire certification.
General Data
| Variants | Main material |
|---|---|
| 11093475 | Galvanised steel |
Dimensional Data
| Variants | Ø A (mm) | Ø B (mm) |
|---|---|---|
| 11093475 | 400 | 160 |
Diagrammatic representation shows two diameters, Ø A and Ø B, with Ø A being the larger diameter and Ø B the smaller diameter.
Regulatory Data
| Variants | Fire protection rating |
|---|---|
| 11093475 | MO |
