Aldes GALVA RANGE - RPC REDUCER GALVA - D560/160
Product Code: 11093937
Category: Airflow control - Rigid galvanised ductwork, Aluminium and Special
Product Description
The RPC concentric flat reducer connects two galvanised ducts of different diameters over a minimum length. For air supply purposes, it is recommended to use a conical reducer due to the pressure losses generated by the flat reducer.
Fields of Application
- Multi-occupancy residential housing
- New construction
- Refurbishment projects
- Non-residential buildings
Installation
- Easy assembly of interlocking accessories: ducts are female, accessories are male.
- Final seal requires sealant and/or perforated strip.
- Attachment to duct using self-tapping screws (4 to 6, depending on diameter).
Reference Arguments
Application: Concentric flat reducer used to connect a duct diameter 560 mm to a duct diameter 160 mm over a minimum length.
Note: Not for use on supply ducts, as it generates high pressure losses.
Description
Concentric flat reducer made of galvanised steel with diameters 560/160 mm.
Main Characteristics
- Available in diameters from 80 mm to 630 mm.
- Made of galvanised steel conforming to EN 10346, ensuring coating uniformity.
- MO fire certification.
General Data
| Variants | Main material |
|---|---|
| 11093937 | Galvanised steel |
Dimensional Data
| Variants | Ø A (mm) | Ø B (mm) |
|---|---|---|
| 11093937 | 560 | 160 |
Diagram showing a reducer with outer diameter (Ø A) and inner diameter (Ø B).
Regulatory Data
| Variants | Fire protection rating |
|---|---|
| 11093937 | MO |
