Aldes GALVA RANGE
Rigid galvanised ductwork, Aluminium and Special
RPC REDUCER GALVA - D560/315
Article Number: 11093934
Description: Concentric flat reducer galvanised steel diameter 560/315 mm
Airflow Control
The RPC joins two galvanised ducts of different diameters together over a minimum length.
Product description
The concentric flat reducer connects two galvanised ducts of different diameters together over a minimum length. For air supply purposes, prefer a conical reducer due to the pressure losses generated by the flat reducer.
Fields of application
Multi-occupancy residential housing, New, Refurbishment, Non-residential buildings
Installation
- Easy assembly of interlocking accessories: ducts are female, accessories are male.
- Final seal requires sealant and/or perforated strip.
- Attached to duct using self-tapping screws (4 to 6 depending on diameter).
Reference arguments
Application:
- Concentric flat reducer used to connect a duct diameter 560 mm to a duct diameter 315 mm over a minimum length.
- Not for use on supply ducts, generates high pressure losses.
Main characteristics
- Available in diameters from 80 to 630.
- Galvanised steel as per EN 10346 ensuring uniformity of coating.
- MO fire certification.
Dimensional data
| Variants | Ø A (mm) | Ø B (mm) |
|---|---|---|
| 11093934 | 560 | 315 |
Diagram showing a reducer with outer diameter Ø A and inner diameter Ø B.
General data
| Variants | Main material |
|---|---|
| 11093934 | Galvanised steel |
Regulatory data
| Variants | Fire protection rating |
|---|---|
| 11093934 | MO |
