Smartwatch Zeblaze Ares 3 Pro User Manual
Product Introduction
The Zeblaze Ares 3 Pro is a smartwatch designed for modern users. It features a clear display, dedicated power and sport buttons, and a user-friendly interface.
The watch features a circular display and two physical buttons on the side.
- 1. Display: The main screen for information and interaction.
- 2. Power Key: Used for powering the device on/off and returning to the main interface.
- 3. Sport Mode: Button to access sport tracking features.
Button Operation
Long press the power button:
- 1. Power on
- 2. Power off
Short press the power key:
- 1. Screen On
- 2. Return
- 3. Return to the main interface
Short press the sport button:
- 1. Enter the sport interface
Screen Operation
Navigate the watch interface using simple gestures:
- ? Swipe up: Access the Message interface.
- ? Scroll down: Access the Control interface.
- ⬅️ Left slide: Access the Shortcut interface.
- ➡️ Right slide: Access the Main Menu.
App Download
To connect your watch to your smartphone and access full features, download the "FitCloudPro" app:
- Search for the "FitCloudPro" app in your device's app store (App Store, Google Play, or Baidu Assistant).
- Open the watch app download interface, use the scan function to scan the QR code provided or the code attached to download the app.
[QR code for app download]
Note: After successful download and installation, please follow the on-screen instructions to register and log in for a better experience and to utilize all product features.
Connect
Pair your watch with your phone using the "FitCloudPro" app.
How to connect:
Open the APP >> Navigate to "Device" >> Select "Add device" >> Choose "Start Search" >> Select the model and connect. Wait a moment to complete the pairing.
Note:
- 1. For successful connection, Bluetooth must be enabled on your phone.
- 2. On Android phones, you must grant location permissions and enable the location information function on the mobile phone system; otherwise, the device may not be found.
Firmware Upgrade
The "FitCloudPro" app will notify you of new firmware versions. You can enter the app interface and select firmware upgrade.
Upgrade Notes:
- 1. The update operation can only be performed when the watch's battery level is above 60%.
- 2. During the update process, the mobile phone interface will display an update progress bar. Do not perform any operations on the watch. Wait until the mobile phone prompts that the update has been successfully completed, and the watch automatically restarts before starting to use it again.
Waterproof Instructions
Waterproof grade: 3ATM
The waterproof performance of this product is not permanent and may weaken with the passage of time.
Addendum: It is not recommended to wear the watch in a hot bath. The molecular radius of water vapor produced when washing with hot water is small and can easily penetrate into the crevices of the watch. As the temperature drops, it gradually condenses into water droplets, which can damage the watch's circuit board and subsequently damage the watch.
Function Introduction
The Zeblaze Ares 3 Pro smartwatch supports a wide range of functions:
- Bluetooth calls
- Message notifications
- Blood oxygen detection
- Blood pressure detection
- Heart rate detection
- Sleep detection
- Breathing exercises
- Exercise modes
- Remote control photography
- Music control
- And more.
Basic Parameters
| Parameter | Specification |
|---|---|
| ⌚ Dimensions | 46.3 x 46.3 x 14.8 mm |
| ? Battery Capacity | 400 mAh |
| ? Bluetooth Version | BLE 5.2 |
| ?️ Display Resolution | 466*466 px |
| ? Display Size | 1.43 inch |
| ⚙️ Sensor | Hx3605 |
Maintenance
It is recommended to wear and maintain the watch according to the following three points:
- Keep the product clean.
- Keep the product dry.
- Please wear the product correctly.
*For stains that are not easy to remove, it is recommended to clean with alcohol.
Safety Instructions
- Although smartwatches can detect real-time dynamic heart rate, they cannot be used for any medical purpose.
- Do not disassemble or modify the equipment and accessories without authorization. Please contact after-sales service in case of equipment failure.
- If the equipment is not used for a long time, please make sure to power it up once every three months.
Contact Information
Website: www.zeblaze.com
Email: Serwis@zeblaze.com
Manufacturer: ShenZhen Zeblaze Smart Company Limited
Address: Room 216-218, Yuan Xiong Building, Tongxing Road 26', Ban Tian Street, Longgang District, Shenzhen, Guangdong, China.
